Acura integra gsr
#29
Honda-Tech Member
iTrader: (5)
Join Date: Dec 2005
Location: Cartagena, Colombia
Posts: 9,609
Received 0 Likes
on
0 Posts
Re: Acura integra gsr
LOL, hahaha...so it's about who has the bigger ***** I see....Dude, you don't need a 800HP engine. Swap a K20 block that is sleeved, with a K24 head that is ported, then drop in some low compression forged pistons around 8:1 or 7.5:1 then drop a sick snail kit, have someone tune your ****, or you will blow I am sure you can make like 750 HP like this but you aren't going to be able to use all that power, so it's best to go with a smaller snail, so that you don't have as much lag, but still make a good number like 480ish-525...But I am sure that RB26 is going to walk all over you...your an FF car, you are in a complete different class. Please youtube this, I want to get a good laugh!
Last edited by jdm_bones; 05-13-2009 at 09:25 PM.
#30
Honda-Tech Member
Join Date: Nov 2008
Location: South Florida
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Re: Acura integra gsr
LOL
You're going to need a fully built and sleeved motor, built internals, and not cheap Wiesco pistons . A fully built head, built tranny, etc. And you're not going to do it on a little baby 16G turbo. Most of these high-power Honda's are using 72mm turbos, and that's not it.
Making 500whp hard and expensive as it is, making almost double that is almost impossible, but it can be done.
Do some reading, you'll learn that it's not easy. You can put thousands upon thousands of dollars in it.
You're going to need a fully built and sleeved motor, built internals, and not cheap Wiesco pistons . A fully built head, built tranny, etc. And you're not going to do it on a little baby 16G turbo. Most of these high-power Honda's are using 72mm turbos, and that's not it.
Making 500whp hard and expensive as it is, making almost double that is almost impossible, but it can be done.
Do some reading, you'll learn that it's not easy. You can put thousands upon thousands of dollars in it.
#31
Re: Acura integra gsr
TROLLiNG............. see and people go with it haha
#32
Honda-Tech Member
Join Date: Sep 2008
Location: Chicago, IL, USA
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Re: Acura integra gsr
what a "ricer" i mean racer
so let me get this right
u know nothing about cars yet u r just gonna drop 40k into a honda w.o knowing anything
yea right kid
so let me get this right
u know nothing about cars yet u r just gonna drop 40k into a honda w.o knowing anything
yea right kid
#38
Honda-Tech Member
Join Date: Jul 2008
Location: San Francisco, CA, United States
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Re: Acura integra gsr
if you want to get 800WHP into a FWD integra and you don't know where to begin i'd suggest not even trying before blowing the block into the sky. but thats just me Ricer, not racer. This is a pointless topic IMO.
Thread
Thread Starter
Forum
Replies
Last Post