***How-To*** Install Valve Springs & Valve Stem Seals
#101
Honda-Tech Member
Re: sorry for bringing this back up..but
i went to autozone and advance auto part to look for liquid gasket, to use on the cam cap..but they don't know what i'm talking about..
what brand or temp rating should i get or buy?? i've got everything except for the valve tappet feeler and liquid gasket..
what brand or temp rating should i get or buy?? i've got everything except for the valve tappet feeler and liquid gasket..
#104
Honda-Tech Member
Re: (Dartanian)
i have just replaced my stem seals and they are loose on the guides. i have tried to press them on and gently hammer and nothing works. they look just like the seals seen in the write up and i was just wondering if there was different sizes of guides? i know this post is old but this is the best place it seems to ask this question.
#105
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Whitby, Ontario, Canada
Posts: 360
Likes: 0
Received 5 Likes
on
2 Posts
Re: (LS AzZkIkr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LS AzZkIkr »</TD></TR><TR><TD CLASS="quote">i have just replaced my stem seals and they are loose on the guides. i have tried to press them on and gently hammer and nothing works. they look just like the seals seen in the write up and i was just wondering if there was different sizes of guides? i know this post is old but this is the best place it seems to ask this question.</TD></TR></TABLE>
Are you 100% sure you bought the right valve stem seals?
Are you 100% sure you bought the right valve stem seals?
#109
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Whitby, Ontario, Canada
Posts: 360
Likes: 0
Received 5 Likes
on
2 Posts
Re: (99SlammedCivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99SlammedCivic »</TD></TR><TR><TD CLASS="quote">I have yet to look but is there another write up w/ working pictures ?</TD></TR></TABLE>
pics back up
pics back up
#112
Honda-Tech Member
Join Date: Dec 2003
Location: 07093, NJ
Posts: 986
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Fern413)
Humm....
On a scale of 1 thru 10...how would you rate the difficulty of this job???
Damn, been thinking of doing this on my LS...only thing is..its an LS lol
nice write up
On a scale of 1 thru 10...how would you rate the difficulty of this job???
Damn, been thinking of doing this on my LS...only thing is..its an LS lol
nice write up
#114
Very Emergency!!
Join Date: Dec 2003
Location: ....Things Just Getting Good..... Reno, NV
Posts: 3,666
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***How-To*** Install Valve Springs & Valve Stem Seals (wildoutwhitegsr)
Awesome right up!! Doing it step by step next weekend!! Thanks!
#115
Double checking
Hey everyone, just wanted to see if these were put on correctly as I did not get a click when i pushed them down, they had resistance when pushing them on but other than that no click. They all have this little gap as seen in the mirror, just wondering if this is normal for supertech seals. I compared with the stock ones and there is no height difference.
Thanks
#117
Honda-Tech Member
Join Date: Oct 2007
Location: Hawaii
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Re: (wildoutwhitegsr)
Hey, are the B18C1 valve seals same as a B18B1? or are there diffrent sizes? I bought supertech valve seals for my LS and it said its for B18B and B18C1 motors. But when I take it to the shop, I was told I needed Bigger seals. So I orderd it from ERISTIK gaskets and now one of my exhuast valves are leaking.
#125
Trial User
Join Date: Nov 2006
Location: minneapolis, mn, usa
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
one little side note that i found when installing seals on a b18c5 head, a 10mm socket works/fits MUCH better than a 12mm. Also I found a valve spring compressor on e-bay made specifically for b18, b16, and h22 heads and works awesome!
overall this is a very informative write up
overall this is a very informative write up