Acura Integra All Integra Except ITR

$ not an issue, best B18B intake w/bolt-ons

Thread Tools
 
Search this Thread
 
Old 10-03-2004, 01:04 PM
  #1  
Honda-Tech Member
Thread Starter
 
Import Al's Avatar
 
Join Date: Mar 2004
Location: Nor*Cal, USA
Posts: 298
Likes: 0
Received 1 Like on 1 Post
Default $ not an issue, best B18B intake w/bolt-ons

I did search, but I need quick true answer. Of the top intakes out, (Injen, aem, J's, comptech, k&n, ARC, EVEN MUGEN if it can be modded to fit.) which gives the broadest powerband increase and 1/4 E.T. improvement on a 99 ls with 4/1 header & full exhaust+cat? Dynos and links welcomed, remember $ no problem! Thanks.


Modified by Import Al at 12:03 AM 10/4/2004
Old 10-03-2004, 01:17 PM
  #2  
 
2SlowDC's Avatar
 
Join Date: Mar 2004
Location: ChemiCali, usa
Posts: 806
Likes: 0
Received 0 Likes on 0 Posts
Default

if $ not an issue? how bout a charge pipe leading to an intercooler connecting to more charge pipes to a compressor?
Old 10-03-2004, 01:19 PM
  #3  
Honda-Tech Member
 
IntegraLova's Avatar
 
Join Date: Jun 2003
Location: NC, Usa
Posts: 329
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (Import Al)

If money is not a issue then why dont you just get a b18c motor or go ls/vtec? And one intake is not gonna blow away the another in terms of performance, escpecially when your talking about a stock b18b.
Old 10-03-2004, 03:14 PM
  #4  
Honda-Tech Member
Thread Starter
 
Import Al's Avatar
 
Join Date: Mar 2004
Location: Nor*Cal, USA
Posts: 298
Likes: 0
Received 1 Like on 1 Post
Default Re: $ not an issue, best B18B intake w/bolt-ons (IntegraLova)

True. Probably going with Injen w/bypass valve; the same type I have on the Civic, might try comptech or J's copy. There's only a couple hp difference, but I'll post gain in E.T. after 1st run.
Old 10-03-2004, 03:22 PM
  #5  
Member
 
HONDA_TYPE_R's Avatar
 
Join Date: Jul 2004
Location: Hi, USA
Posts: 1,851
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (IntegraLova)

The intakes you have listed are all know to produce decent numbers on a dyno. The MUGEN, J's, and Comptech are some of the highest dollar ones, and they produce probably some of the best numbers. I would look around for dyno numbers on these, and remember every car is different.
Old 10-03-2004, 03:24 PM
  #6  
Honda-Tech Member
iTrader: (2)
 
BLacK FirE's Avatar
 
Join Date: Apr 2004
Location: Long Island, NY
Posts: 2,665
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (HONDA_TYPE_R)

I'm going to have to agree with everyone else. If money is not an issue just buy an intake and then spend all of your money on something bigger like turbo.
Old 10-04-2004, 08:39 AM
  #7  
Honda-Tech Member
Thread Starter
 
Import Al's Avatar
 
Join Date: Mar 2004
Location: Nor*Cal, USA
Posts: 298
Likes: 0
Received 1 Like on 1 Post
Default Re: $ not an issue, best B18B intake w/bolt-ons (BLacK FirE)

I found dyno for the B16 J's copy by SCO, and it made 11 peak hp, but had more bottom to lower-mid range than Injen & costs 69.99 w/heat sheild, Free shipping!! Only drawback is it only comes in brite red, blu, yellow; I'll paint it carbon or black, and IS ******* LOUD! It's on http://www.dragracing.com and is nearly 1/3 the price of injen, comptech, real J's, K&N. Gr8 value!


Modified by Import Al at 5:42 AM 10/5/2004


Modified by Import Al at 7:58 AM 10/5/2004
Old 10-04-2004, 09:08 AM
  #8  
 
Forgiven's Avatar
 
Join Date: Oct 2002
Location: Marion, VA
Posts: 352
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (Import Al)

Comptech Icebox
Old 10-04-2004, 09:13 AM
  #9  
Honda-Tech Member
 
ViciousSpike's Avatar
 
Join Date: Sep 2004
Location: Miami, Florida, USA
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (DC4TEG)

If money weren't an isuue for me, I'd buy an Japanese NSX and keep it stock.
Old 10-04-2004, 09:13 AM
  #10  
Honda-Tech Member
 
ViciousSpike's Avatar
 
Join Date: Sep 2004
Location: Miami, Florida, USA
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (ViciousSpike)

But I'd go for Mugen.
Old 10-04-2004, 12:32 PM
  #11  
 
Elemental's Avatar
 
Join Date: Mar 2004
Location: Illusion
Posts: 689
Likes: 0
Received 0 Likes on 0 Posts
Default

get autozone piping and a filter. works the same. Its not like its gonna matter with an all motor b18b.
Old 10-04-2004, 12:55 PM
  #12  
Honda-Tech Member
 
maggsgsr's Avatar
 
Join Date: Dec 2001
Posts: 2,204
Likes: 0
Received 1 Like on 1 Post
Default Re: $ not an issue, best B18B intake w/bolt-ons (Import Al)

Ice Box

1) Quiet
2) Quiet
3) No chance of hydro lock unless your an idiot. I've drivin through a foot of water with my car slammed and had no problems.
4) CAI dyno #'s and short ram throttle response.

I use to have an AEM CAI and I like the ice box a lot more.
Old 10-04-2004, 02:40 PM
  #13  
Member
 
kappa's Avatar
 
Join Date: Feb 2002
Location: Orange County
Posts: 1,497
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (Import Al)

go with Comptech
Old 10-04-2004, 04:05 PM
  #14  
Honda-Tech Member
 
Kevin450's Avatar
 
Join Date: Oct 2004
Location: Montreal, Quebec, Canada
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (Import Al)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Import Al &raquo;</TD></TR><TR><TD CLASS="quote">I found dyno for the B16 J's copy by SCO, and it made 11 peak hp, but had more bottom to lower-mid range than Injen & costs 76.99 w/heat sheild!! Only drawback is it only comes in brite red, blu, yellow; I'll paint it carbon or black, and IS ******* LOUD! It's on http://www.dragracing.com and is nearly 1/3 the price of injen, comptech, real J's, K&N. Gr8 value! </TD></TR></TABLE>

if thats the case go for it without a doubt!!!!!
Old 10-04-2004, 04:19 PM
  #15  
Honda-Tech Member
 
slo2kgsr's Avatar
 
Join Date: Jul 2003
Location: Jacksonville, FL, USA
Posts: 258
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (Kevin450)

brother put the v2 on his Si and I wish I would have got one for my GSR instead of the regular CAI
Old 10-04-2004, 04:20 PM
  #16  
SCAM ARTIST
 
EV1L SI's Avatar
 
Join Date: Feb 2003
Location: KnoxvilleTN 5600, RPMs, USA
Posts: 696
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (tegraLS97)

J's sounds like a good gain but I voted Comptech because I use it myself.
Old 10-04-2004, 07:24 PM
  #17  
Honda-Tech Member
 
stareatsun's Avatar
 
Join Date: Jun 2003
Location: Boston, MA, USA
Posts: 527
Likes: 0
Received 0 Likes on 0 Posts
Default

LS/VTEC built motor boosted
Old 10-04-2004, 09:01 PM
  #18  
Honda-Tech Member
Thread Starter
 
Import Al's Avatar
 
Join Date: Mar 2004
Location: Nor*Cal, USA
Posts: 298
Likes: 0
Received 1 Like on 1 Post
Default Re: (stareatsun)

^You guys are funny! I said intake, but boost is a kind of intake; the best, priciest kind. If it was my Teg not my lil bro's, I'd do what stareatsun said: GT30 dual B.B. turbo kit and not stop tuning till 300+ whp. But then it'd SMOKE my EM2 '01 civic EX 5spd coupe ( http://www.d-series.org/forums...=1594 ). I win because of skill not mods, so this intake could make it interesting.. Thanks 4 the input, I'll give you a review after install.


Modified by Import Al at 8:01 AM 10/5/2004
Old 10-04-2004, 10:33 PM
  #19  
Junior Member
 
DannyBoy_Db8's Avatar
 
Join Date: Apr 2004
Location: West burbs, MN, United states
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (Import Al)

when i dyno'ed my car with the aem v2 intake it gained me 10 hp and 5 foot lbs of torque over my rs akimoto short ram. I got a 94 four door gs-r
Old 10-05-2004, 04:23 AM
  #20  
 
DC4xRacer's Avatar
 
Join Date: Jun 2004
Location: Antioch, TN, USA
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default Re: $ not an issue, best B18B intake w/bolt-ons (Import Al)

Comptech....
Old 10-05-2004, 04:28 AM
  #21  
 
Stewie's Avatar
 
Join Date: May 2002
Location: Nutley, NJ
Posts: 1,699
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (lsVtec...)

I hated my comptech Ice box and it was loud too.

I agree with this<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lsVtec... &raquo;</TD></TR><TR><TD CLASS="quote">if $ not an issue? how bout a charge pipe leading to an intercooler connecting to more charge pipes to a compressor?</TD></TR></TABLE>
Old 10-05-2004, 04:39 AM
  #22  
B*a*n*n*e*d
 
K.F14's Avatar
 
Join Date: Feb 2003
Location: Seattle
Posts: 23,844
Likes: 0
Received 1 Like on 1 Post
Default Re: $ not an issue, best B18B intake w/bolt-ons (maggsgsr)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maggsgsr &raquo;</TD></TR><TR><TD CLASS="quote">Ice Box

1) Quiet
2) Quiet
3) No chance of hydro lock unless your an idiot. I've drivin through a foot of water with my car slammed and had no problems.
4) CAI dyno #'s and short ram throttle response.

I use to have an AEM CAI and I like the ice box a lot more. </TD></TR></TABLE>

Second that.
Old 10-05-2004, 10:55 AM
  #23  
Honda-Tech Member
 
maggsgsr's Avatar
 
Join Date: Dec 2001
Posts: 2,204
Likes: 0
Received 1 Like on 1 Post
Default Re: (Stewie)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stewie &raquo;</TD></TR><TR><TD CLASS="quote">I hated my comptech Ice box and it was loud too.

I agree with this</TD></TR></TABLE>

You must have installed it wrong, maybe the box wasn't properly closed or the lower pipe wasn't attached. That intake is quiet as hell, almost sounds stock. And plenty of people on here have vouched for that.
Old 10-05-2004, 12:36 PM
  #24  
Honda-Tech Member
iTrader: (2)
 
B2FiNiTY's Avatar
 
Join Date: Mar 2001
Posts: 38,367
Likes: 0
Received 1 Like on 1 Post
Default Re: (maggsgsr)

word. Super quiet.
Old 10-06-2004, 05:45 AM
  #25  
 
Stewie's Avatar
 
Join Date: May 2002
Location: Nutley, NJ
Posts: 1,699
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (maggsgsr)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maggsgsr &raquo;</TD></TR><TR><TD CLASS="quote"> You must have installed it wrong.</TD></TR></TABLE>

Yep, you got it I installed it wrong.

Maybe they redesigned it since I had it which, was a real long time ago, but the cover just snapped in place. There were no rubber gaskets nothing like stock.

It's all relative anyway. WHat's quiet to you may not be to me. Also, my car in non vtec, different mods, etc.

It stands to reason, how could it possibly sound like stock when there is no resonators? The stock resonators do a LOT for noise reduction.

I think most peopl say it sound quite because 9 out 0f 10 users probably had some sort of aftermarket intake before installing the icebox and in comparison, it's quiet to what they had.


Quick Reply: $ not an issue, best B18B intake w/bolt-ons



All times are GMT -8. The time now is 09:04 PM.