for those that did this mod did you fit a switch for the power door locks somewhere else?

anyone have a wiring diagram, and where did you place it?

Thanks in advance




[Modified by Ghetto Racing, 5:50 PM 12/10/2001]

 

I know people use RS covers.

 

Outside handles..

Use the trunk key slot instead of the door.

Will

 

i don't get it

but i was thinking on the passenger side i could get a drivers side pwr windows switch and use one of the switches for the door locks and i guess the passenger would have one touch pwr windows.

i hope it works

 

I am not clear...

If you use the RS inside door trim pieces.. you will loose the silver PLD switch. I have combated that installing a sunroof switch that serves the same purpose.

I thought your first question was using 4-door integra rear outside door handles on the door of a type R to eliminate the opening that the key goes into. If that is teh case... just use the trunk key slot and let the PLD system unlock the doors.

If you want to remove the stuff from the inside of the door to help prevent a slim-jim from getting the door open... good luck. A rock is a lot easier/quicker way into the car...

Will

 

sorry it's the inside covers i was refering to.

a rock is easier but it's not the punks who want to steal my CD's i'm worried about it's the ones that wan to steal the whole damn car! And those guys need time and are more sophisticated than a rock.

what did you think of placing a drivers side pwr windows switch cosole on the passenger side idea.

 

Sounds cool... but the sunroof switch looks stock

Will

 

nice completes both sides

 

To increase door security, remove the rails that pop the doors open inside the doors and replace with an electronic popper.

Or somehow create a sheetmetal covering for the rails.