FS - 16x7.5 Kosei K1 Racing wheels - 4x100, ET32, white - Cary, NC
Thought you STS/X guys may be interested. (Do y'all run 16's? 215-45-16 Azenis comes to mind...)
For Sale - 16x7.5 Kosei K1 Racing wheels - 4x100, ET32, white painted. 15.0 lbs according to the website, but I measured about 15.4 lbs on an old and uncalibrated scale.
Three of them are BRAND NEW, perfect, and never mounted. One has had light use and has a 225-40-16 Kumho 712 mounted. I have decided not to use them. $159 each new from Tire Rack.
Will sell for $450 (firm) for the set. That's less than the price of 3 new ones
Prefer local pickup - Cary, NC
http://www.nogumracing.com/whi...1.JPG
http://www.nogumracing.com/whi...2.JPG
http://www.nogumracing.com/whi...3.JPG
http://www.nogumracing.com/whi...4.JPG
http://www.nogumracing.com/whi...7.JPG

_________________
Mike Whitney
whitney@nogumracing.com
919-454-5445 mobile, 919-486-2979 work, 919-387-4949 home
For Sale - 16x7.5 Kosei K1 Racing wheels - 4x100, ET32, white painted. 15.0 lbs according to the website, but I measured about 15.4 lbs on an old and uncalibrated scale.
Three of them are BRAND NEW, perfect, and never mounted. One has had light use and has a 225-40-16 Kumho 712 mounted. I have decided not to use them. $159 each new from Tire Rack.
Will sell for $450 (firm) for the set. That's less than the price of 3 new ones
Prefer local pickup - Cary, NChttp://www.nogumracing.com/whi...1.JPG
http://www.nogumracing.com/whi...2.JPG
http://www.nogumracing.com/whi...3.JPG
http://www.nogumracing.com/whi...4.JPG
http://www.nogumracing.com/whi...7.JPG
_________________
Mike Whitney
whitney@nogumracing.com
919-454-5445 mobile, 919-486-2979 work, 919-387-4949 home
If only they made some kind of negative wheel spacer.
Also...if only my 3 was an E30.
Modified by TeamSlowdotOrg at 9:31 PM 9/7/2004
Also...if only my 3 was an E30.

Modified by TeamSlowdotOrg at 9:31 PM 9/7/2004
Just for reference, what is the acceptable range of offsets for a IT/STS/SP suspended (ie lowered + some camber) Civic/Integra and a 7.0 or 7.5" wheel?
I'm pretty sure ET30 to 35 for a 7" wheel on 88-91 EF is fine - I had both on my H4 car.
How about the later cars? IIRC my 97 GS-R took ET45 from the factory? I'm sure that a lower offset would be fine, but I'm not sure "how low".
Granted, these wheels came from a Miata owner. Maybe I should shuffle on over to Miata.net.
(PS - on an E30 you'd want to run a 5-10mm spacer)
I'm pretty sure ET30 to 35 for a 7" wheel on 88-91 EF is fine - I had both on my H4 car.
How about the later cars? IIRC my 97 GS-R took ET45 from the factory? I'm sure that a lower offset would be fine, but I'm not sure "how low".
Granted, these wheels came from a Miata owner. Maybe I should shuffle on over to Miata.net.
(PS - on an E30 you'd want to run a 5-10mm spacer)
Well, on my car at least I'd have rub issues with the wheel that far out. 35 seems to be the minimum offset with a 7.5 to not have interference issues with the fender. Maybe somebody has some experience to the contrary, which would be good news.
Miata.net's classifieds are horrendous. I would ebay them first.
Miata.net's classifieds are horrendous. I would ebay them first.
Thread
Thread Starter
Forum
Replies
Last Post




