FS:92 Hatch w/ITR headlight conv. B18C1(built) in Colorado
Had a busy weekend and didn't get pics of the damage to the front end yet. New price though.
It's got almost 3000 on the rebuild, like new. Head isn't that much older. Looking to get $6,000 obo. Car needs a new tranny and clutch. The front bumper was tapped recently. Estimate was $450 to fix, but I needed the money for bills. Any serious offer will probably sell this car. I wanna sell as fast as possible.
New price!!!!
Newer pics at the bottom
Vehicle Info
Year 1992
Vin#:2HGEH2355NH538425
Engine Code B18C1
Make Honda
ECU Mugen programmed P72
Model Civic DX
Redline 10,000
Modifications
Engine B18C1
ITR balanced and blue-printed bottom end w/micro-polished crank
JDM ITR rods and pistons balanced by Spoon
JG Head
ARP rod bolts
JUN 3 cams
Crower Valve Springs & Retainers
JG/Edelbrock Cam gears
JG/Edelbrock Intake Manifold
JG/Edelbrock Throttle Body 65mm
AEM ITR Cold Air Intake
DCSports 4-1 header
Apex-i N1 exhaust
Spoon Radiator cap
Lightened flywheel(8lbs)
Spoon resevoir covers
8.5mm MSD Spark Plug Wires
NGK Spark Plugs
Suspension/Brakes
KW full coil-over Suspension
RS Akimoto Monekey Bars Chassis Cross Brace
Suspension Techniques Sway Bar's front and rear
Wheels/Tires
European Domestic Market Only Honda Optional 15X6.5's w/
Yokohama 195/45-15's
Exterior
JDM Integra Type R 1-piece headlight conversion
Darkened Side Markers with Red bulbs
SiR lower front lip from Japan
Duck Bill Wing
JDM Antenna delete
Wings West RS(Mugen style) front lip
Interior
Schroth 4 point harnesses(red)
Momo Red Race 34cm steering wheel
Full Si interior converted from DX grey to Si Black, including dashboard with Si gauge cluster
Integra LS shift ****
Custom Red Interior Pieces
Apex-i V-AFC V2
pics...
http://www.kutsujuracing.com/v...r.php
Looking for reasonable offers. Front end cost $7,000. Great car, but I got a huge payment on my new STi, and need to sell this to pay off bills.
Pics...










Modified by Spoon92 at 5:42 PM 9/8/2004
Modified by Spoon92 at 12:39 PM 9/13/2004
It's got almost 3000 on the rebuild, like new. Head isn't that much older. Looking to get $6,000 obo. Car needs a new tranny and clutch. The front bumper was tapped recently. Estimate was $450 to fix, but I needed the money for bills. Any serious offer will probably sell this car. I wanna sell as fast as possible.
New price!!!!
Newer pics at the bottom
Vehicle Info
Year 1992
Vin#:2HGEH2355NH538425
Engine Code B18C1
Make Honda
ECU Mugen programmed P72
Model Civic DX
Redline 10,000
Modifications
Engine B18C1
ITR balanced and blue-printed bottom end w/micro-polished crank
JDM ITR rods and pistons balanced by Spoon
JG Head
ARP rod bolts
JUN 3 cams
Crower Valve Springs & Retainers
JG/Edelbrock Cam gears
JG/Edelbrock Intake Manifold
JG/Edelbrock Throttle Body 65mm
AEM ITR Cold Air Intake
DCSports 4-1 header
Apex-i N1 exhaust
Spoon Radiator cap
Lightened flywheel(8lbs)
Spoon resevoir covers
8.5mm MSD Spark Plug Wires
NGK Spark Plugs
Suspension/Brakes
KW full coil-over Suspension
RS Akimoto Monekey Bars Chassis Cross Brace
Suspension Techniques Sway Bar's front and rear
Wheels/Tires
European Domestic Market Only Honda Optional 15X6.5's w/
Yokohama 195/45-15's
Exterior
JDM Integra Type R 1-piece headlight conversion
Darkened Side Markers with Red bulbs
SiR lower front lip from Japan
Duck Bill Wing
JDM Antenna delete
Wings West RS(Mugen style) front lip
Interior
Schroth 4 point harnesses(red)
Momo Red Race 34cm steering wheel
Full Si interior converted from DX grey to Si Black, including dashboard with Si gauge cluster
Integra LS shift ****
Custom Red Interior Pieces
Apex-i V-AFC V2
pics...
http://www.kutsujuracing.com/v...r.php
Looking for reasonable offers. Front end cost $7,000. Great car, but I got a huge payment on my new STi, and need to sell this to pay off bills.
Pics...










Modified by Spoon92 at 5:42 PM 9/8/2004
Modified by Spoon92 at 12:39 PM 9/13/2004
how did you do that conversion i like that alot . wish i had something to trade you cauuse your car is one of the best hatches i've seen on here.



