Check page two for updates on the situation! thanks guys
<U>Purchase more than one of the bars below and recieve 10% your entire order!</U>
First these are a four point rear cross-bar setup that mounts to factory threaded holes in the floor of any 94-01 integra. They are constructed of 1" mild steel and weigh in at under 10lbs. They come with all the brackets and hardware needed for a simple 5 minute installation. These will greatly stiffen up your rear end and add better control and follow through of your rear.
Pm me for any question or details or email me at havokmob@yahoo.com
Other applications coming shortly!

Price: $185 Shipped!!!
Paypal Only! Unless discussed!




Next are rear floor braces and trunk wall braces. The floor brace(Large:Bar A) will fit any 92+ civic and 94+ integra by mounting to factory threaded 17mm holes in the framerails in the rear of the trunk. The trunk wall brace(Small:Bar B) will fit any 94+ integra. Non type R models will require the drilling of a small 1/4" hole in the factory sheetmetal for mounting. Type R's feature factory threaded holes in the mounting location of the stock rear wall brace. Either bars will come complete with all the needed hardware for installation in to the above mentioned cars.
Several of each ready to ship out right away!!! Floor brace and wall brace available in unpainted steel as well!
Price: Floor Brace(Bar A): $55 Shipped
Trunk Wall Brace(Bar B): $45 Shipped
or...........Both Bars(A&B) For: $85 Shipped
Paypal Only Please!!! (unless arrangement is made)






Vouch Thread: https://honda-tech.com/zerothread?id=724445

Old Rear Thread-https://honda-tech.com/zerothread?id=942155

Floor Brace Thread-https://honda-tech.com/zerothread?id=944842

Modified by RenoRacing at 6:47 PM 8/13/2004


Modified by RenoRacing at 5:40 PM 11/7/2004

 

bump for a great seller and a great price!

 

good guy to deal with

 

would this work for eg also?

 

We dont' have a X-brace available for the EG yet, still finding time to get those going and keep up with everything else. The rear floor brace will fit any 92+ civic or Integra and are in stock ready to ship out!

 

i bought mine. the price is definitely right.

 

hmm. i think i'll stick to em racing bars

 

That's fine, not trying to compete or anything, just offering something that people want and can easily afford!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cha Shu Bao &raquo;</TD></TR><TR><TD CLASS="quote">hmm. i think i'll stick to em racing bars</TD></TR></TABLE>

yeah . .I agree. EM bars are lil cleaner . . .these look a too much like DIY bars . .but price is low though .

I think these are like the bars that Waepon-R makes. Does anyone have pictures of the Weapon-R ones?

 

i'll bump for jesse. good guy!

 

Ill be interested in the EG hatch..Please let mek know

 

EM might look nicer, but this setup looks much more sturdy. Bars look more beefy, and they're welded instead of bolted down.

 

That's right kids! and about half the price!!! Thanks for the input guys! positive or negative, it's constructive and that helps!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ti3d in &raquo;</TD></TR><TR><TD CLASS="quote">EM might look nicer, but this setup looks much more sturdy. Bars look more beefy, and they're welded instead of bolted down.</TD></TR></TABLE>

i agree, i think ill get these when the cash allows. cant hurt bieng more stiff

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ti3d in &raquo;</TD></TR><TR><TD CLASS="quote">EM might look nicer, but this setup looks much more sturdy. Bars look more beefy, and they're welded instead of bolted down.</TD></TR></TABLE>

thanks for saying that. i didn't want to be the only one defending RenoRacing's system.

EMs are way more expensive and don't offer near as much structural support.
Same with Weapon-R's system. Weapon-Rs may be an X design, but the cross is bolted in and not joined at the X part of it, where chassis twist needs to be countered.

again to RenoRacing.

i only ordered the trunk bar b/c my setup requires a custom X design (which i'm working on now) b/c i have a nitrous system and battery box in trunk, but the trunk bar is very nice for the money. doesn't look DIY at all!

 

&lt; Looking forward to EG Model coming out!

 

Do you have EK Coupe model?

 

Watch out with this guy I did a little business with him and hasnt got back to me in a week...Hope your seeing this...

edit: I retract my previous statement.....We talked and settled it....Free Bump


Modified by SpugenEG at 5:58 PM 8/26/2004

 

any accord 94-97 bars planned for production?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cha Shu Bao &raquo;</TD></TR><TR><TD CLASS="quote">hmm. i think i'll stick to em racing bars</TD></TR></TABLE>

Why cause its nice and shinny? Get over it, it's supposed to stiffen your chassie not make it look pretty. !

Nice product great price, Hope the floor bar fits the eg 4 door cause Ill get on e in a sec. !

 

pm'd

 

PMed

 

would the X bar fit an eg hatch? how are they new?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tmkpres &raquo;</TD></TR><TR><TD CLASS="quote"> Why cause its nice and shinny? Get over it, it's supposed to stiffen your chassie not make it look pretty. !
</TD></TR></TABLE>if you want both you can always get it chromed personally i wouldnt do that. but these look really nice.

 

RenoRacings a good guy.