G3NR8's 98 Green Coupe (56k Smoke a Jay)
Well, I'm probably finished with my car for the rest of the summer....Gonna spend the rest working out the bugs in the Turbo, and tuning. I've posted pix on here before but never in one place...Heres the lowdown:
98 D16y8
Custom turbo:
- STD Manifold mated to DSM Housing W/TD05H 14g Compressor
- Internal WG...replaced intenally with stainless WG w/ bigger flapper
- VAFC
- DSM 450cc's w/OBD1 Honda injector clips / resistor box
- Walbro 255 Fuel pump
- B&M FPR and Gauge
- 3000GT BOV
- JRC 6" FMIC
- Custom DP
- Hi flo cat
- Apexi N1 Catback
- New 1 step colder plugs
- Mantacor Wires
Exterior:
- VIS CF Evo hood
- Type R style grill
- Mugen Style Lip
- Black housing headlights (non ghetto style)
- 99-00 Tail lights
- M3 Style rear trunk lip spoiler
- JDM Sidemarkers
- Factory painted side skirts
- JDM Antenna block off plate
Suspension:
- 16” Rota C8’s w/ kuhmo 712’s
- Tokico HP’s
- Ground controls
- Omni man camber kit f&r
- Front mugen style strut brace
- Rear upper strut brace
Interior:
- Viper alarm, keyless, remote start, hood pop
- CF gauge inlay
- ITR shift boot
- Skunk2 Shift ****
- B&M Shorty
- Energy Suspension shift bush
- New OEM Floor mats
- Small system w/ 1) 12" sub, 2 amps, components, XM radio, Higher end Pioneer HU, etc... All incognito style in rear tire well...
Everything in the car done by myself.....
I know theres more... On with the pix:





With freinds RX7:





Gauge display I made:

at night:

Modified by G3NR8 at 12:29 AM 8/16/2004
98 D16y8
Custom turbo:
- STD Manifold mated to DSM Housing W/TD05H 14g Compressor
- Internal WG...replaced intenally with stainless WG w/ bigger flapper
- VAFC
- DSM 450cc's w/OBD1 Honda injector clips / resistor box
- Walbro 255 Fuel pump
- B&M FPR and Gauge
- 3000GT BOV
- JRC 6" FMIC
- Custom DP
- Hi flo cat
- Apexi N1 Catback
- New 1 step colder plugs
- Mantacor Wires
Exterior:
- VIS CF Evo hood
- Type R style grill
- Mugen Style Lip
- Black housing headlights (non ghetto style)
- 99-00 Tail lights
- M3 Style rear trunk lip spoiler
- JDM Sidemarkers
- Factory painted side skirts
- JDM Antenna block off plate
Suspension:
- 16” Rota C8’s w/ kuhmo 712’s
- Tokico HP’s
- Ground controls
- Omni man camber kit f&r
- Front mugen style strut brace
- Rear upper strut brace
Interior:
- Viper alarm, keyless, remote start, hood pop
- CF gauge inlay
- ITR shift boot
- Skunk2 Shift ****
- B&M Shorty
- Energy Suspension shift bush
- New OEM Floor mats
- Small system w/ 1) 12" sub, 2 amps, components, XM radio, Higher end Pioneer HU, etc... All incognito style in rear tire well...
Everything in the car done by myself.....
I know theres more... On with the pix:


With freinds RX7:


Gauge display I made:
at night:
Modified by G3NR8 at 12:29 AM 8/16/2004
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpugenEG »</TD></TR><TR><TD CLASS="quote">Nice! I like it better the the N's</TD></TR></TABLE>
same here..
same here..
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpugenEG »</TD></TR><TR><TD CLASS="quote">Nice! I like it better the the N's</TD></TR></TABLE>
Better Believe it!
Better Believe it!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by allyourapex »</TD></TR><TR><TD CLASS="quote">Cute turbo...
lol, j/p.
Looks great man.
</TD></TR></TABLE>
Hehe...yeah It looks teeny compared to a t3, or anything else for that matter. I'm thinking of upgrading to a 16g since it will bolt onto the same housing
I've gotten comments on the hood both good and bad...but I like it. I might actually go back to a stock hood for awhile.
The Group N's were a freinds. I'm trying to trade my rims for a set of 15's right now....I like the way the 15's look and ride on my car....
Thanks for the comments so far
lol, j/p.
Looks great man.
</TD></TR></TABLE>Hehe...yeah It looks teeny compared to a t3, or anything else for that matter. I'm thinking of upgrading to a 16g since it will bolt onto the same housing
I've gotten comments on the hood both good and bad...but I like it. I might actually go back to a stock hood for awhile.
The Group N's were a freinds. I'm trying to trade my rims for a set of 15's right now....I like the way the 15's look and ride on my car....
Thanks for the comments so far
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CD_5 »</TD></TR><TR><TD CLASS="quote">thats a manly ic...you got there...
</TD></TR></TABLE>
Thats a johnny race car IC (johnnyracecar.com) He sells them for $200 shipped! They're so easy to install on eg's or ek's....and they look good too
</TD></TR></TABLE>Thats a johnny race car IC (johnnyracecar.com) He sells them for $200 shipped! They're so easy to install on eg's or ek's....and they look good too
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by allyourapex »</TD></TR><TR><TD CLASS="quote">Cute turbo...
lol, j/p.
Looks great man.
</TD></TR></TABLE>
haha
lol, j/p.
Looks great man.
</TD></TR></TABLE>haha
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H2ouup2 »</TD></TR><TR><TD CLASS="quote">Man I wish I went up to check out your setup, but I get forgetting to ask you for some reason !! Great Pixors !!</TD></TR></TABLE>
It's aiight....next meet
hopefully theres more people next time!
It's aiight....next meet
hopefully theres more people next time!





on me