4x114 bolt pattern question?
Honda-Tech Member
Joined: Jun 2003
Posts: 3,021
Likes: 0
From: here, there, everywhere
there are two, types of c8 i have seen.
the most comon one are the 8 hole universal. if this is what you have, yes it would fit.
i have seen some 8 hole 4x100 only. this has the hole for 4x100, and tge other 4 holes are big.so you cannot use a lug nut on it. if this is waht you have then no.
to determine which one you have, you could look at the box it came in.it should have the spec. or look at the lug holes. if all eight looks the same, you have a universal, but if 4 is tapered and the other 4 is not, then you have a specific bolt pattern.
the most comon one are the 8 hole universal. if this is what you have, yes it would fit.
i have seen some 8 hole 4x100 only. this has the hole for 4x100, and tge other 4 holes are big.so you cannot use a lug nut on it. if this is waht you have then no.
to determine which one you have, you could look at the box it came in.it should have the spec. or look at the lug holes. if all eight looks the same, you have a universal, but if 4 is tapered and the other 4 is not, then you have a specific bolt pattern.
Honda-Tech Member
Joined: Mar 2004
Posts: 1,501
Likes: 0
From: in my R
Re: 4x114 bolt pattern question? (IN VTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IN VTEC »</TD></TR><TR><TD CLASS="quote">no, unless you have a '96-spec JDM ITR or '96-spec JDM ITR hubs.</TD></TR></TABLE>
yump..join me and the rest in the 4x114.3 club bro!!!!
yump..join me and the rest in the 4x114.3 club bro!!!!
Thread
Thread Starter
Forum
Replies
Last Post
