I'm looking to install an LSD in my GSR. I need the 80 mm shim set for the ball bearings (I switched from the tapered roller bearings). The part numbers follow:

41441-PL3-B00
41442-PL3-B00
41443-PL3-B00
41444-PL3-B00
41445-PL3-B00
41446-PL3-B00
41447-PL3-B00
41448-PL3-B00
41449-PL3-B00
41450-PL3-B00
41451-PL3-B00
41452-PL3-B00
41453-PL3-B00
41454-PL3-B00
41455-PL3-B00
41456-PL3-B00
41457-PL3-B00
41441-P21-000
41442-P21-000
41443-P21-000

 

which one or ones of those do you need?

once you install the diff you will THEN measure the clearance and then see what thickness you need to buy.

 

I won't know which shim I need until I have the transmission disassembled. I cannot wait a week for for the specific shim that I need to arrive. I was hoping that someone had a set minus the one shim that they needed.

 

people do not buy the "set"
your understanding of the scenario is a bit off.

the other option is this... if you order a thick one, chances are a machine shop could grind it down to whatever thickness you need, well, if they do that stuff in your area.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by owen_the_soyboy &raquo;</TD></TR><TR><TD CLASS="quote">people do not buy the "set"
your understanding of the scenario is a bit off.

the other option is this... if you order a thick one, chances are a machine shop could grind it down to whatever thickness you need, well, if they do that stuff in your area.</TD></TR></TABLE>
that would be your best option

 

I would wait til you get everything measured.

Each shim is about $5-6 from the dealer

 

The whole set is indeed expensive. I'm planning on buying the gamut and selling the ones that I don't need to the next guy who is going to install their own differential. I need to complete this task in a weekend.