+*+*+*+ AWESOME turbo setup for sale....excellent parts...(56k, NO)+*+*+*+
Thread Starter
Honda-Tech Member
Joined: Dec 2003
Posts: 7,383
Likes: 1
From: Charleston, SC
+*+*+*+ AWESOME turbo setup for sale....excellent parts...(56k, NO)+*+*+*+
I am posting this for a friend because he has realized that it is too costly to go turbo at this time.
He is wanting trades (complete longblock) or would like to get close to what he has into it for use towards another COMPLETE engine (ITR)
<FONT SIZE="3"><FONT COLOR="red">$2,400 obo engine has been assembled and ready to go</FONT></FONT>
He has over $2,740 dollars in this build and would like to get close to what he has in it.
serious offers only
<FONT SIZE="2">B18C1 bottom end and B17A head</FONT>
Machine shop work on block: $546
----Block was Bored, Honed, Hot tanked. Entire rotating assembly was balanced (with flywheel attached).
Machine shop work on head: $180 + 500 for original cost of head
----Head recieved a 3 angle valve job, was resurfaced, and hot tanked.
Internals: $506
---JE Forged 9.0:1 compression pistons at 81.5mm bore (SLIGHTLY used). JE piston ring set (<U>brand new, costed $106</U>). Eagle forged H-beam connecting rods. Each set comes pre assembled and pre lubed.
Head gasket set: $180
----All OEM Acura parts, comes with valve guide seals, intake and exhaust manifold gaskets, head gasket, valve cover gasket, cam seals, spark plug well seals.
Timing Belt Kit: $120
----Kit includes OEM spec Timing belt, tensioner, and water pump, new in box.
Brand new ARP 190,000 psi head studs, $105
Short Block: $606
----Block also includes: Main caps, windage tray, oil pan, oil pump, oil pickup, hard pipe, thermostat housing, Block girdle, crank with polished journals
----Head :
Head comes with all original inside parts, cam gears, etc.
Modified by dirtyd463 at 11:38 PM 7/29/2004
Modified by dirtyd463 at 8:04 AM 8/4/2004
Modified by dirtyd463 at 8:55 PM 8/4/2004
Modified by dirtyd463 at 3:54 PM 8/10/2004
He is wanting trades (complete longblock) or would like to get close to what he has into it for use towards another COMPLETE engine (ITR)
<FONT SIZE="3"><FONT COLOR="red">$2,400 obo engine has been assembled and ready to go</FONT></FONT>
He has over $2,740 dollars in this build and would like to get close to what he has in it.
serious offers only
<FONT SIZE="2">B18C1 bottom end and B17A head</FONT>
Machine shop work on block: $546
----Block was Bored, Honed, Hot tanked. Entire rotating assembly was balanced (with flywheel attached).
Machine shop work on head: $180 + 500 for original cost of head
----Head recieved a 3 angle valve job, was resurfaced, and hot tanked.
Internals: $506
---JE Forged 9.0:1 compression pistons at 81.5mm bore (SLIGHTLY used). JE piston ring set (<U>brand new, costed $106</U>). Eagle forged H-beam connecting rods. Each set comes pre assembled and pre lubed.
Head gasket set: $180
----All OEM Acura parts, comes with valve guide seals, intake and exhaust manifold gaskets, head gasket, valve cover gasket, cam seals, spark plug well seals.
Timing Belt Kit: $120
----Kit includes OEM spec Timing belt, tensioner, and water pump, new in box.
Brand new ARP 190,000 psi head studs, $105
Short Block: $606
----Block also includes: Main caps, windage tray, oil pan, oil pump, oil pickup, hard pipe, thermostat housing, Block girdle, crank with polished journals
----Head :
Head comes with all original inside parts, cam gears, etc.
Modified by dirtyd463 at 11:38 PM 7/29/2004
Modified by dirtyd463 at 8:04 AM 8/4/2004
Modified by dirtyd463 at 8:55 PM 8/4/2004
Modified by dirtyd463 at 3:54 PM 8/10/2004
If it doesn't sell here I guess I will just have to put it together and be in debt.
