Anyone have a stroked H22... I search and didn't find much? what kind of gains can you expect?

 

Call Bob at Auto Race Industries. He is very knowledgable about this. 561-840-1878. He helped me along the way with my H23AVTEC. Good luck. Hope this helps.

 

crower kit. strokes to 2.6L, 260whp I believe. and it costs between 4000-8000 (i.e.- i forgot the price)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sinister &raquo;</TD></TR><TR><TD CLASS="quote">Anyone have a stroked H22... I search and didn't find much? what kind of gains can you expect?</TD></TR></TABLE>

if you have a 98+ h22a4 then just swap in a f23 crank which will stroke the motor close to 2.5

you go from 90.7 to 97mm stroke

 

you can also expect a motor that redlines at 6500 rpm and wont last long

 

Check with 2point6. He seems to be the authoritative individual on this. He has done it, and has a site collectiveracing.com... or something like that. Kind of interesting to SEARCH for in the archives.................

I think that if you are bent on this route, not to go 2.6, but stay 2.4ish.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prelittlelude &raquo;</TD></TR><TR><TD CLASS="quote">

if you have a 98+ h22a4 then just swap in a f23 crank which will stroke the motor close to 2.5

you go from 90.7 to 97mm stroke</TD></TR></TABLE>

wurd

 

yupper

 

you better be using some incredibly low friction skirts and coatings on your bottom end to run any kind of rpm with a 97 mm stroke