It is more than what I expected

Today I received the hasport EG k20 kit. Basically I expected the mounts and the bolts and maybe a single page showing all the mounts in the same page positioned... Instead this is what I got that suprised me and I want to share it with you.

I paid $575+ shipping that came out to $587 shipped from full race.

The box



The contents (2 stickers, a guide, and a warranty card not shown)



The install guide goes all out...




Lists all the tools you will need for the swap, step for removing the engine and what tool each step needs....

It includes pictures of where these mounts should go and what to do....

Some examples







Thank you HASPORT for a complete KIT and to full-race.com for the fast service (They are across the street from Hasport )

 

for a minute I thought it was going to be a bad callout.

Hasport

 

Got my kit last week. I can't say enough good things about Hasports customer service and products.

They get from me...

 

lol same here I thought it was going to be a bad callout..

Hey you get what you pay for

 

nice to know you're happy. good luck with your project

 

cool.

is there any cutting of the mounts on the body? or is a complete bolt on with no cutting?

also did you ask what the different urethane types are? 62a? 70a? 88a?

 

wow. this swaps gonna be gainin some popularity now...

 

Damn you got all that with just a mount kit. hasport

 

Most of the time, with a great company you'll get great service and hardware. to Hasport because I'm going to them when I swap.

 

What other parts other than the mount kit and the motor swap do you need? You need a lot of the little hard to find parts from the rsx right?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cxSHOE &raquo;</TD></TR><TR><TD CLASS="quote">
is there any cutting of the mounts on the body? or is a complete bolt on with no cutting?</TD></TR></TABLE>

Only requires removal of the upper tranny mount bracket.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cxSHOE &raquo;</TD></TR><TR><TD CLASS="quote">cool.

is there any cutting of the mounts on the body? or is a complete bolt on with no cutting?

also did you ask what the different urethane types are? 62a? 70a? 88a?

</TD></TR></TABLE>

I think you need to cut off the transmission mount from the body.

 

nice..have fun with it! you're going to love the motor

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94_HATCH &raquo;</TD></TR><TR><TD CLASS="quote">Damn you got all that with just a mount kit. hasport </TD></TR></TABLE>

 

fawk me

Imagining my sol with k20a...wow

 

gooooo nikos!!!
and kudos to Brian and HASport. you kick ***.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kamin &raquo;</TD></TR><TR><TD CLASS="quote">gooooo nikos!!!
and kudos to Brian and HASport. you kick ***.</TD></TR></TABLE>

Shame on you turning down a job at hasport just so you can keep the POS skyline powered nissan

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cxSHOE &raquo;</TD></TR><TR><TD CLASS="quote">cool.

is there any cutting of the mounts on the body? or is a complete bolt on with no cutting?


</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy &raquo;</TD></TR><TR><TD CLASS="quote">

I think you need to cut off the transmission mount from the body.</TD></TR></TABLE>


yeah, u cut it off....

so.... is the new one provided by hasport to be welded... or also bolt on?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nikos &raquo;</TD></TR><TR><TD CLASS="quote">Shame on you turning down a job at hasport just so you can keep the POS skyline powered nissan </TD></TR></TABLE>
do what now?
trust me, if i was EVER offered a job at HASport i would be working there. no hesistation.
why was i offered a job i wasnt aware of? hahaha cause ill shoot myself if i missed out on a chance to work there, even in sales.



Modified by Kamin at 9:03 PM 6/28/2004

 

when i clicked this thread i was thinking "how much did K20EG pay him to make this???"

 

stickers make everything worthwhile. I was dissappointed that GC and TireRack did not send me stickers.

 

Great choice for thread title!

It definitely got my attention.

 

looks nice now get it installed so we can see the final outcome

 

How did you order the mounts? I didn't see on their site that they were in production yet. Did you call them up? Big to Hasport and delivering the goods. =]

 

Very nice Nikos