PHiZ's big garage sale.
Thread Starter
Member
Joined: Apr 2003
Posts: 3,347
Likes: 0
From: NL, CT, cuba
PHiZ's big garage sale.
PHiZ's Big Garage Sale
Hi, I'm considering a new direction for my project, if you're interested in anything here, please reply IN THIS THREAD with an offer. Please DO NOT contact me via PM.
Also, I have all sorts of chipped ECUs for sale, as always, and I will be doing street/dyno wideband tuning all summer.
<FONT SIZE="5">LOOKING FOR A B-SERIES HYDRO TRANNY</FONT>
WTB: 2004 OEM optional RSX RIMS
FS: Eibach Pro-Kit #4018.140
99-00 Civic Si
FS:Goodridge SSbrake lines #20021
99-00 Civic Si (should work for any 4 wheel disc setup civic/integra)
FS: Greddy blue box off of a 92-95 civic kit.
FS: Prothane # 8-304
Rear Trailing Arm Bushing kit 88-00 civic
FS: KYB AGX #741007
FRONT
1989-91 Honda Civic (Exc. S/W) & CRX
1992-95 Honda Civic, CRX & Del Sol
Quantity Two
FS: KYB AGX #741023
REAR
1996-00 Honda Civic
Quantity Two
FS: AXXIS Ultimates Brake Pads
94-01 Integra FRONT
D 797 RU
Replaces: 109.06170 and 67-D617
AXXIS Ultimates Brake Pads
94-01 Integra REAR
D 1163 RU
Replaces: 9.03740 and 67-D374
FS: Brembo "Blanks" #42510-SR3-000-
REAR 1994- 2001 Acura Integra 1.8 RS/LS/GS ( B18B1 ) Brembo Rotors
Brembo "Blanks" #45251-SK7-J00-
FRONT Acura Integra 1.8 RS/LS/GS ( B18B1 ) Brembo Rotors
FS: JE Pro Series 9.2:1 CR Forged Pistons
0.020 over to 81.5mm
ARP rod bolts
Eagle ESP Forged Connecting Rods
FS: B18B1 Head
Crower 63402 Turbo Camshafts
Crower Valve Springs
AEM Tru-Time Cam Gears (RED)
supertech valve - stock size.
3 Angle Valve Job
]
FS: B18B1 Block with professionally installed JG Engine Dynamics Block Guard
Smooth cylinders, comes with oil and water pumps, and crank and caps.
FS: B18B1 engine. Supposedly has bad Head-Gasket, was overheating
FS: Used clutch, valve cover, wiring harness.
FS: 1996 JDM SiR-G suspension, with 2in JDM drop. includes ALL hardware,
including 1in MC, and 40/40 proportioning valve.
FS:Stock OBD1 B18B1 header.
99-00 D16Y8 header, cat-flange is cut.
99-00 D16Y8 Heat Shield
96-98 D16Y8 Lower section of stock header
FS: Honda OEM optional 15in rims. With 90% AVS ES100 in 205-50-15. Flawless
except for the one pothole damage shown here.
FS: Mystery Tranny Hydro supposedly off a B20
barcode reads: D2J3-2006674
FS: GSR rims profesionally powdercoated white with 95% all season tires. No
curbage.
FS: 93 civic SI Intake manifold, stripped of sensors except IACV.
OBD1 B18B1 Fuel rail and stock injectors
OBD0 B18B intake manifold, complete except for TPS
MSD 6AL part # 6420
FS: Proportioning valve from a 99-00 Civic Si 40/40
Vortec 12:1 FMU
AFC controller W/ harness
Integra LS fuel pump, used.
Greddy Profec B, With solenoid
Momo Carbon Fiber shift ****
Synapse Missing Link
-PHiZ
Modified by PHiZ at 1:17 AM 7/6/2004
Hi, I'm considering a new direction for my project, if you're interested in anything here, please reply IN THIS THREAD with an offer. Please DO NOT contact me via PM.
Also, I have all sorts of chipped ECUs for sale, as always, and I will be doing street/dyno wideband tuning all summer.
<FONT SIZE="5">LOOKING FOR A B-SERIES HYDRO TRANNY</FONT>
WTB: 2004 OEM optional RSX RIMS
FS: Eibach Pro-Kit #4018.140
99-00 Civic Si
FS:Goodridge SSbrake lines #20021
99-00 Civic Si (should work for any 4 wheel disc setup civic/integra)
FS: Greddy blue box off of a 92-95 civic kit.
FS: Prothane # 8-304
Rear Trailing Arm Bushing kit 88-00 civic
FS: KYB AGX #741007
FRONT
1989-91 Honda Civic (Exc. S/W) & CRX
1992-95 Honda Civic, CRX & Del Sol
Quantity Two
FS: KYB AGX #741023
REAR
1996-00 Honda Civic
Quantity Two
FS: AXXIS Ultimates Brake Pads
94-01 Integra FRONT
D 797 RU
Replaces: 109.06170 and 67-D617
AXXIS Ultimates Brake Pads
94-01 Integra REAR
D 1163 RU
Replaces: 9.03740 and 67-D374
FS: Brembo "Blanks" #42510-SR3-000-
REAR 1994- 2001 Acura Integra 1.8 RS/LS/GS ( B18B1 ) Brembo Rotors
Brembo "Blanks" #45251-SK7-J00-
FRONT Acura Integra 1.8 RS/LS/GS ( B18B1 ) Brembo Rotors
FS: JE Pro Series 9.2:1 CR Forged Pistons
0.020 over to 81.5mm
ARP rod bolts
Eagle ESP Forged Connecting Rods
FS: B18B1 Head
Crower 63402 Turbo Camshafts
Crower Valve Springs
AEM Tru-Time Cam Gears (RED)
supertech valve - stock size.
3 Angle Valve Job
]FS: B18B1 Block with professionally installed JG Engine Dynamics Block Guard
Smooth cylinders, comes with oil and water pumps, and crank and caps.
FS: B18B1 engine. Supposedly has bad Head-Gasket, was overheating
FS: Used clutch, valve cover, wiring harness.
FS: 1996 JDM SiR-G suspension, with 2in JDM drop. includes ALL hardware,
including 1in MC, and 40/40 proportioning valve.
FS:Stock OBD1 B18B1 header.
99-00 D16Y8 header, cat-flange is cut.
99-00 D16Y8 Heat Shield
96-98 D16Y8 Lower section of stock header
FS: Honda OEM optional 15in rims. With 90% AVS ES100 in 205-50-15. Flawless
except for the one pothole damage shown here.
FS: Mystery Tranny Hydro supposedly off a B20
barcode reads: D2J3-2006674
FS: GSR rims profesionally powdercoated white with 95% all season tires. No
curbage.
FS: 93 civic SI Intake manifold, stripped of sensors except IACV.
OBD1 B18B1 Fuel rail and stock injectors
OBD0 B18B intake manifold, complete except for TPS
MSD 6AL part # 6420
FS: Proportioning valve from a 99-00 Civic Si 40/40
Vortec 12:1 FMU
AFC controller W/ harness
Integra LS fuel pump, used.
Greddy Profec B, With solenoid
Momo Carbon Fiber shift ****
Synapse Missing Link
-PHiZ
Modified by PHiZ at 1:17 AM 7/6/2004
Thread Starter
Member
Joined: Apr 2003
Posts: 3,347
Likes: 0
From: NL, CT, cuba
Re: PHiZ's big garage sale. (nuckingfuts)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nuckingfuts »</TD></TR><TR><TD CLASS="quote">sell me the b18b!!!!</TD></TR></TABLE>
Which one? Make an offer.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ai95 »</TD></TR><TR><TD CLASS="quote">hey.. how much are u lookin for the brembo;s? i was kinda lookin for the slotted rotars.. but if your price is right.. ill take urs istead. let me know</TD></TR></TABLE>
$120 picked up, I'm in 06360, by the casinos.
-PHiZ
Which one? Make an offer.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ai95 »</TD></TR><TR><TD CLASS="quote">hey.. how much are u lookin for the brembo;s? i was kinda lookin for the slotted rotars.. but if your price is right.. ill take urs istead. let me know</TD></TR></TABLE>
$120 picked up, I'm in 06360, by the casinos.
-PHiZ
Trending Topics
Thread Starter
Member
Joined: Apr 2003
Posts: 3,347
Likes: 0
From: NL, CT, cuba
Re: PHiZ's big garage sale. (Rocks)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rocks »</TD></TR><TR><TD CLASS="quote">pmed ya</TD></TR></TABLE>
Replied.
-PHiZ
Replied.
-PHiZ
Thread Starter
Member
Joined: Apr 2003
Posts: 3,347
Likes: 0
From: NL, CT, cuba
Re: (smurfey002)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmikey »</TD></TR><TR><TD CLASS="quote">how much for the optional rims?</TD></TR></TABLE>
Alot, because they have almost new AVS ES100s I've got about 800 into the rims, and 600 into the tires. OEM sweetness though, I've never seen another car with them. And the dealership can't even tell me what car they were optional on, hehe.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smurfey002 »</TD></TR><TR><TD CLASS="quote">how much for MSD, and is it new?? im quite interested if the price is right. </TD></TR></TABLE>
I'm thinking ~150, it's new.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dkim48 »</TD></TR><TR><TD CLASS="quote">bump and vouch for a cool guy
</TD></TR></TABLE>
Thanks man, it's been great doing business with you in the past.
-PHiZ
Alot, because they have almost new AVS ES100s I've got about 800 into the rims, and 600 into the tires. OEM sweetness though, I've never seen another car with them. And the dealership can't even tell me what car they were optional on, hehe.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smurfey002 »</TD></TR><TR><TD CLASS="quote">how much for MSD, and is it new?? im quite interested if the price is right. </TD></TR></TABLE>
I'm thinking ~150, it's new.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dkim48 »</TD></TR><TR><TD CLASS="quote">bump and vouch for a cool guy
</TD></TR></TABLE>Thanks man, it's been great doing business with you in the past.
-PHiZ
Thread Starter
Member
Joined: Apr 2003
Posts: 3,347
Likes: 0
From: NL, CT, cuba
Re: (Pikachu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Pikachu »</TD></TR><TR><TD CLASS="quote">Hey PhiZ, wanna sell me the engine stand? I need one! </TD></TR></TABLE>
hahah, we got a place here that has em cheap if ya want.
-PHiZ
hahah, we got a place here that has em cheap if ya want.
-PHiZ
Thread Starter
Member
Joined: Apr 2003
Posts: 3,347
Likes: 0
From: NL, CT, cuba
Re: (simplypinoyy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by simplypinoyy »</TD></TR><TR><TD CLASS="quote">hey is that AFC an S-AFC or V-AFC</TD></TR></TABLE>
If you look at the picture it says SAFC.
The pictures are clickable ppl!!!!
But yes, someone on another forum asked the same thing, I wasn't descriptive enough in the text description.
-PHiZ
If you look at the picture it says SAFC.
The pictures are clickable ppl!!!!
But yes, someone on another forum asked the same thing, I wasn't descriptive enough in the text description.
-PHiZ
Thread Starter
Member
Joined: Apr 2003
Posts: 3,347
Likes: 0
From: NL, CT, cuba
Re: (OneSlowDA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OneSlowDA »</TD></TR><TR><TD CLASS="quote">the SAFC is mine </TD></TR></TABLE>
I hope I saved my clever little SOLD stamp.
-PHiZ
</TD></TR></TABLE>I hope I saved my clever little SOLD stamp.
-PHiZ
