Snapped my Stage 4 CM puck!
#1
Munkyw3rkz.webs.com
Thread Starter
Join Date: Jun 2003
Location: PUTTIN UR MOUTH ON CURBZ CPT, SoCal
Posts: 22,166
Likes: 0
Received 1 Like
on
1 Post
Snapped my Stage 4 CM puck!
ok well i went to Fontana Sat to make a few runs and with my luck i broke some shyt....
the track is 4 hours from wher ei am living/stationed, and a hour 15 min frm my dads house...
well i did my 2nd gear Burnout to heat up my BFG DR's and staged up.......me holding it at 7K off the line i took off...hooked up with a 2.0 60FT....
wel some time to throw 2nd.....never went in, so i clamly let off the gas and gently try to go in gear to cruise the rest of the way...no cluth pressure!
im thinking i busted my slave cyclinder..no biggie simple enough...
with the pull of first gear out the hole i rolled passed the 1/4 finish with plently of speed ...well my dad took his Corolla home and came back while i tried to figure out what happened because the car wouldnt start too.....i raise the car up to clear the trailor...got back to the South Bay at 3:30am sunday morning...woke up at 8am and pulled my ride back up north 3 hours away!!!!
i took a hour b 4 i stated to work on it adn this is what happened.....
Spec........ClutchMasters Stage 4 pressure plate and 4 puck spring loaded
ClutchMasters Lightweight Flywheel......all 3 are done!
Car on Towers
Chunks of the puck
Pressure Plate
Flywheel
PUCK
the track is 4 hours from wher ei am living/stationed, and a hour 15 min frm my dads house...
well i did my 2nd gear Burnout to heat up my BFG DR's and staged up.......me holding it at 7K off the line i took off...hooked up with a 2.0 60FT....
wel some time to throw 2nd.....never went in, so i clamly let off the gas and gently try to go in gear to cruise the rest of the way...no cluth pressure!
im thinking i busted my slave cyclinder..no biggie simple enough...
with the pull of first gear out the hole i rolled passed the 1/4 finish with plently of speed ...well my dad took his Corolla home and came back while i tried to figure out what happened because the car wouldnt start too.....i raise the car up to clear the trailor...got back to the South Bay at 3:30am sunday morning...woke up at 8am and pulled my ride back up north 3 hours away!!!!
i took a hour b 4 i stated to work on it adn this is what happened.....
Spec........ClutchMasters Stage 4 pressure plate and 4 puck spring loaded
ClutchMasters Lightweight Flywheel......all 3 are done!
Car on Towers
Chunks of the puck
Pressure Plate
Flywheel
PUCK
#5
Munkyw3rkz.webs.com
Thread Starter
Join Date: Jun 2003
Location: PUTTIN UR MOUTH ON CURBZ CPT, SoCal
Posts: 22,166
Likes: 0
Received 1 Like
on
1 Post
Re: Snapped my Stage 4 CM puck! (pb16b)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pb16b »</TD></TR><TR><TD CLASS="quote">wow... you going with cm again?</TD></TR></TABLE>
Unsure as of right now imlooking around to see!
i was happy with how it was for the street and strip...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20_EK »</TD></TR><TR><TD CLASS="quote">Holy ISH dude!
Im at a loss for words... </TD></TR></TABLE>
same here...when it happened i was upset i was more concerned wondering what it was! figuring it out in my head...once i saw it i was actually smiling....
and my Roommate burned his clutch out on his RSX so i told him
*****'s Burn clutches.......Real men Snap them!!!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by enjOi vtec »</TD></TR><TR><TD CLASS="quote">whoa that's nasty, i love your car btw</TD></TR></TABLE>
thanx man!
Unsure as of right now imlooking around to see!
i was happy with how it was for the street and strip...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20_EK »</TD></TR><TR><TD CLASS="quote">Holy ISH dude!
Im at a loss for words... </TD></TR></TABLE>
same here...when it happened i was upset i was more concerned wondering what it was! figuring it out in my head...once i saw it i was actually smiling....
and my Roommate burned his clutch out on his RSX so i told him
*****'s Burn clutches.......Real men Snap them!!!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by enjOi vtec »</TD></TR><TR><TD CLASS="quote">whoa that's nasty, i love your car btw</TD></TR></TABLE>
thanx man!
#7
Risky Business
Join Date: Jul 2002
Location: Trackside with the smoking bee
Posts: 25,211
Likes: 0
Received 47 Likes
on
39 Posts
Re: Snapped my Stage 4 CM puck! (Geeky_Gambit)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Geeky_Gambit »</TD></TR><TR><TD CLASS="quote">that is pretty crazy there santos. </TD></TR></TABLE>
agreed
agreed
Trending Topics
#9
Honda-Tech Member
Join Date: Feb 2002
Location: SAN FRANCISCO, CA, USA
Posts: 6,740
Likes: 0
Received 0 Likes
on
0 Posts
Re: Snapped my Stage 4 CM puck! (kyosoeg6)
Looks like you can just replace the face on the flywheel, the rest doesnt look damaged. I've never had a problem with CM clutchs (stage3) or flywheels. but i never bought their puck clutch. I would say give CM a call and talk to one of the service people, see if they can help you out. Good luck!
#12
Honda-Tech Member
Join Date: Nov 2002
Location: USA
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Andres-eh2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Andres-eh2 »</TD></TR><TR><TD CLASS="quote">how much power are you putting down?</TD></TR></TABLE>
yeah I was wondering that too. What's your setup?
yeah I was wondering that too. What's your setup?
#13
Honda-Tech Member
Re: (Andres-eh2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Andres-eh2 »</TD></TR><TR><TD CLASS="quote">how much power are you putting down?</TD></TR></TABLE>
Wondering the same thing...
Is the car resting on your rims/tires???? If so, why and whats the advantage???
Wondering the same thing...
Is the car resting on your rims/tires???? If so, why and whats the advantage???
#14
Munkyw3rkz.webs.com
Thread Starter
Join Date: Jun 2003
Location: PUTTIN UR MOUTH ON CURBZ CPT, SoCal
Posts: 22,166
Likes: 0
Received 1 Like
on
1 Post
Re: (dohcdelsol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcdelsol »</TD></TR><TR><TD CLASS="quote">
Wondering the same thing...
Is the car resting on your rims/tires???? If so, why and whats the advantage???</TD></TR></TABLE>
no the car is on jack stands...i just placed the them under teh car!!!!!!<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Andres-eh2 »</TD></TR><TR><TD CLASS="quote">how much power are you putting down?</TD></TR></TABLE>
roughly 190ish
Wondering the same thing...
Is the car resting on your rims/tires???? If so, why and whats the advantage???</TD></TR></TABLE>
no the car is on jack stands...i just placed the them under teh car!!!!!!<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Andres-eh2 »</TD></TR><TR><TD CLASS="quote">how much power are you putting down?</TD></TR></TABLE>
roughly 190ish
#17
Honda-Tech Member
Re: (delLudeVTEC)
Holy **** dude, thats insain. Do you think CM would replace it because isnt 4 puck agresive and not suppose to do that? Just be glad you didnt break anything else. Did you atleast get one run in, i want to know if your in 12s yet.
Also are you using your rims for jackstands? lol.
Also are you using your rims for jackstands? lol.
#18
Munkyw3rkz.webs.com
Thread Starter
Join Date: Jun 2003
Location: PUTTIN UR MOUTH ON CURBZ CPT, SoCal
Posts: 22,166
Likes: 0
Received 1 Like
on
1 Post
Re: (Luserkid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid »</TD></TR><TR><TD CLASS="quote">Holy **** dude, thats insain. Do you think CM would replace it because isnt 4 puck agresive and not suppose to do that? Just be glad you didnt break anything else. Did you atleast get one run in, i want to know if your in 12s yet.
Also are you using your rims for jackstands? lol. </TD></TR></TABLE>
no 12's yet but i will put $ that i will be there by end of summer!!!
Also are you using your rims for jackstands? lol. </TD></TR></TABLE>
no 12's yet but i will put $ that i will be there by end of summer!!!
#19
Honda-Tech Member
Re: (SnoFlake EG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SnoFlake EG »</TD></TR><TR><TD CLASS="quote">
no 12's yet but i will put $ that i will be there by end of summer!!!
</TD></TR></TABLE>
Lol, so your staying with Honda's huh? What happened to that saying "if i dont hit 12s with this car how it is im going back to Toyota's"? Just admit it, Honda's are better
no 12's yet but i will put $ that i will be there by end of summer!!!
</TD></TR></TABLE>
Lol, so your staying with Honda's huh? What happened to that saying "if i dont hit 12s with this car how it is im going back to Toyota's"? Just admit it, Honda's are better
#20
Munkyw3rkz.webs.com
Thread Starter
Join Date: Jun 2003
Location: PUTTIN UR MOUTH ON CURBZ CPT, SoCal
Posts: 22,166
Likes: 0
Received 1 Like
on
1 Post
Re: (Luserkid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid »</TD></TR><TR><TD CLASS="quote">
Lol, so your staying with Honda's huh? What happened to that saying "if i dont hit 12s with this car how it is im going back to Toyota's"? Just admit it, Honda's are better </TD></TR></TABLE>
in my heart i will be fond of RWD....i think and my father as well thinks the B series engine is oneof the finest ever!
Lol, so your staying with Honda's huh? What happened to that saying "if i dont hit 12s with this car how it is im going back to Toyota's"? Just admit it, Honda's are better </TD></TR></TABLE>
in my heart i will be fond of RWD....i think and my father as well thinks the B series engine is oneof the finest ever!
#21
Honda-Tech Member
Re: (SnoFlake EG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid »</TD></TR><TR><TD CLASS="quote">
Just admit it, Honda's are better </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SnoFlake EG »</TD></TR><TR><TD CLASS="quote">
i think and my father as well thinks the B series engine is oneof the finest ever! </TD></TR></TABLE>
Good enough for me
Just admit it, Honda's are better </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SnoFlake EG »</TD></TR><TR><TD CLASS="quote">
i think and my father as well thinks the B series engine is oneof the finest ever! </TD></TR></TABLE>
Good enough for me
#22
Senior Member
wow. ive had 4 CM clutches and never once had a problem with it. 3 of my friends use CM as well and nothing like this has ever happened to them. maybe 7k dump was too much for it
#23
Munkyw3rkz.webs.com
Thread Starter
Join Date: Jun 2003
Location: PUTTIN UR MOUTH ON CURBZ CPT, SoCal
Posts: 22,166
Likes: 0
Received 1 Like
on
1 Post
Re: (JDMlifestyle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMlifestyle »</TD></TR><TR><TD CLASS="quote">wow. ive had 4 CM clutches and never once had a problem with it. 3 of my friends use CM as well and nothing like this has ever happened to them. maybe 7k dump was too much for it</TD></TR></TABLE>
next thing after that is a race puck.....and it wasnt a 7K dump i played it...feathering u know
next thing after that is a race puck.....and it wasnt a 7K dump i played it...feathering u know
#25
Munkyw3rkz.webs.com
Thread Starter
Join Date: Jun 2003
Location: PUTTIN UR MOUTH ON CURBZ CPT, SoCal
Posts: 22,166
Likes: 0
Received 1 Like
on
1 Post
Re: (jcarothers)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jcarothers »</TD></TR><TR><TD CLASS="quote">so what are you replacing it with?</TD></TR></TABLE>
still looking
still looking