FS: Parting out the VX - koni/gc, engine swap, mugen, sprint, etc, etc
Thread Starter
B*a*n*n*e*d
Joined: Jul 2002
Posts: 2,104
Likes: 0
From: Orlando, FL, USA
FS: Parting out the VX - koni/gc, engine swap, mugen, sprint, spoon, fluidyne, sparco, etc
decided to part out my vx hatchback - THE SHELL IS NOT FOR SALE - just these parts listed:
Complete GSR/Type R Engine Swap
- gsr block
- .025" oversize itr pistons
- new water pump
- new oil pump
- new spoon sports headgasket
- new headbolts
- new timing belt
- new oil pan
- p&p b16 head
- ferrea valves
- new valve guides
- jun type II intake cam
- itr exhaust cam
- Accel 255cc injectors
- 68mm civic si throttle body
- titan motorsports cam gears
- dc sports 4-1 jdm ceramic header
- civic si tranny
- spoon sports clutch
- toda flywheel
- fluidyne radiator
- b&m fpr and gauge
- stock axles
- wiring harness
- mounts
- chipped p28 ecu
- engine makes 185 hp at the wheels and 132 torque - dyno graphs to prove it, car ran consistent 13.1 @ 104 mph on bfg drag radials
$4800 for the whole swap about the same price as a Type R swap that makes more power and has newer parts
- almost new Mugen Front Upper Strut Bar for EG/DC, might fit EK as well - $250
- almost new Mugen Rear Upper Strut Bar for EG/DC - $250
- Replica Carbon Fiber Spoon Sports Duckbill rear spoiler - chipped on one side - $175
- (2) Black Sparco Sprint Seats with Brackets/Sliders for EG/DC and Black 2" 3 Point Harnesses - barely used - $750 (will only sell as a set)
- GSR Valve cover with stripped paint - $50
- h22 valve cover - $50
- AEM Blue Fuel Filter - $50
- Apexi Universal 3" Stainless Muffler - $100
these are all my personal parts - email james@titanmotorsports.com with any questions, thanks
Modified by TitanMotorsports.com at 11:51 PM 4/27/2004
Modified by TitanMotorsports.com at 12:57 AM 4/28/2004
Modified by TitanMotorsports.com at 5:09 PM 4/30/2004
Modified by TitanMotorsports.com at 7:25 PM 4/30/2004
Modified by TitanMotorsports.com at 6:11 PM 5/3/2004
Complete GSR/Type R Engine Swap
- gsr block
- .025" oversize itr pistons
- new water pump
- new oil pump
- new spoon sports headgasket
- new headbolts
- new timing belt
- new oil pan
- p&p b16 head
- ferrea valves
- new valve guides
- jun type II intake cam
- itr exhaust cam
- Accel 255cc injectors
- 68mm civic si throttle body
- titan motorsports cam gears
- dc sports 4-1 jdm ceramic header
- civic si tranny
- spoon sports clutch
- toda flywheel
- fluidyne radiator
- b&m fpr and gauge
- stock axles
- wiring harness
- mounts
- chipped p28 ecu
- engine makes 185 hp at the wheels and 132 torque - dyno graphs to prove it, car ran consistent 13.1 @ 104 mph on bfg drag radials
$4800 for the whole swap about the same price as a Type R swap that makes more power and has newer parts
- almost new Mugen Front Upper Strut Bar for EG/DC, might fit EK as well - $250
- almost new Mugen Rear Upper Strut Bar for EG/DC - $250
- Replica Carbon Fiber Spoon Sports Duckbill rear spoiler - chipped on one side - $175
- (2) Black Sparco Sprint Seats with Brackets/Sliders for EG/DC and Black 2" 3 Point Harnesses - barely used - $750 (will only sell as a set)
- GSR Valve cover with stripped paint - $50
- h22 valve cover - $50
- AEM Blue Fuel Filter - $50
- Apexi Universal 3" Stainless Muffler - $100
these are all my personal parts - email james@titanmotorsports.com with any questions, thanks
Modified by TitanMotorsports.com at 11:51 PM 4/27/2004
Modified by TitanMotorsports.com at 12:57 AM 4/28/2004
Modified by TitanMotorsports.com at 5:09 PM 4/30/2004
Modified by TitanMotorsports.com at 7:25 PM 4/30/2004
Modified by TitanMotorsports.com at 6:11 PM 5/3/2004
Trending Topics
Thread Starter
B*a*n*n*e*d
Joined: Jul 2002
Posts: 2,104
Likes: 0
From: Orlando, FL, USA
Re: FS: Parting out the VX - koni/gc, engine swap, mugen, sprint, etc, etc (GotGSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GotGSR »</TD></TR><TR><TD CLASS="quote">will the ITR sway bar w/ beaks kit go right into my 95 GSR?</TD></TR></TABLE>
yes it should bolt right on since you have a stock rear sway bar on the car already so the places to mount are there
james
yes it should bolt right on since you have a stock rear sway bar on the car already so the places to mount are there
james
Thread Starter
B*a*n*n*e*d
Joined: Jul 2002
Posts: 2,104
Likes: 0
From: Orlando, FL, USA
Re: (GotGSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GotGSR »</TD></TR><TR><TD CLASS="quote">can you do 125 shipped for the swaybar set-up? If so you'll have paypal + 3% tonight! Pm me</TD></TR></TABLE>
yeah that works for me - email me at james@titanmotorsports.com if you want it and I will give you the payment information, thanks
james
yeah that works for me - email me at james@titanmotorsports.com if you want it and I will give you the payment information, thanks
james
