Oh and how you like dat Stock honda yellow bolt paint look
Still need to install the new fuel pump, but we started the motor up by spraying some ethanol into the manifold :lol: Took about 5 minutes to put the motor in, about 20 to prep the mounts, 3 to hook up the pnp harness...should be on da streez y0 by like wed. If you look at the last 2 pics, the mount needed to be cut a bit to fit around the idler pulley (I think b/c the pulley on the CTR motor isn't the same as where it would go had you removed the PS pump on an ITR motor)

 

nice.. i guess its time to update your sig

 

W W, You make the swap look so easy! Great work and give us updates as you progress.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtec.dc2 &raquo;</TD></TR><TR><TD CLASS="quote">nice.. i guess its time to update your sig</TD></TR></TABLE>

yeah i suppose so...for people who think this swap takes a ton of time...w/ a mount kit and pnp harness this can be done in 8 hours start to finish EASILY..honestly it's not hard at all...and would be 10x easier if you had a ITR swap (i have CTR so the shifter cables need lots of fab work to bolt to a RSX shifter)

 

Awesome swap man!
I SPY THE K2O RAIL

 

hmm should all of us start lookn for a swap to upgrade

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kicker773 &raquo;</TD></TR><TR><TD CLASS="quote">hmm should all of us start lookn for a swap to upgrade </TD></TR></TABLE>

yes...bring it up here and we'll offer a special "K20A swaps while you wait" in and out in juan day lol

 

8========D~ ~ ~ ~ ~ ~

 

no driving in the rain eh

 

Looks great. I am glad I was able to help you get the motor.

YOU OWE ME A RIDE BIATCH!!!!

 

man so it must be alot better than stock R motor eh?

damn.. let me know how it pulls and stuff.

good stuff

 

nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ^jefs0ng &raquo;</TD></TR><TR><TD CLASS="quote">Awesome swap man!
I SPY THE K2O RAIL </TD></TR></TABLE>
i made those....... ok well at least the logos... to k20eg and STR

 

Very nice, K20s are the real deal

 

what kind of harness did you use? who made it?

 

I wonder what kind of retrofitting (if any) it would take to drop a k20a into my jdm 4dr.

 

sweet

 

g dayam..

crazy shyt

 

 

DAMN... sounds like a easy swap.

 

wow...

 

very impressed

 

Very impressive.I like the swap alot. The k20 looks like it belongs in the Integra engine bay.

 

 

dizzzope swap... me next.. hopefully