I just ordered the 1.8ltr stainles steel steppeed header with merge collector. This will be going into an Ls/Vtec with about 12:1 compression. Full ported Alaniz head with competition headwork with skunk2 stag2 cams and skunk2 valvetrain. Along with an STR 70mm TB, skunk2 manifold, hondata manifold gasket, rc 310injectors, new ACT clutch type-r flywheel, B16 tranny, All tuned together with my hondata s200 unit. Going into my gutted 95eg hatch... Hoping to hit the 200hp mark with a good tune, what do you guys think?

 

sounds pretty sick man, what's your bottom end look like? oem components or forged? i'm lookin at that same header as well for my street del sol with an ls/vtec about the same compression as you got. I hope it does well but watch out for speed bumps, clearence isnt' all that great with headertech.

 

well bottem end is just oem parts with arp rod bolts. ls rods with jdm p30pistons. Its 11.7:1 with a stock b16 head, but mine is milled 30thousandths from Alaniz, so its at about 12:1 + or - If I can hit some good solid 13sec times, Than ill consider moving up to a b20 block with higher compression. and going with an MB allmotor frontend and doors.

 

it doesnt seem you should have any problems going deep into the 13's with that setup. 200 whp shouldn't be a problem either. ive got a headertech header and love it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by na200whp &raquo;</TD></TR><TR><TD CLASS="quote">it doesnt seem you should have any problems going deep into the 13's with that setup. 200 whp shouldn't be a problem either. ive got a headertech header and love it.</TD></TR></TABLE>

If he runs on slicks, he will easily hit 12s.

As far as the header goes...good luck. It took HeaderTech 3 month's for me to get mine. Sander has already waited a month for his and still counting.... The wait is definately worth it. Oh, what are they charging for SS headers now?

 

Damn, Enzo quoted me at about 2-3weeks. I Emailed him all of my creditcard info and he said he wouldnt bill it until it shipped out. Seemed like a cool guy. Cany wait to get it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tnsxsear1 &raquo;</TD></TR><TR><TD CLASS="quote">I just ordered the 1.8ltr stainles steel steppeed header with merge collector. This will be going into an Ls/Vtec with about 12:1 compression. Full ported Alaniz head with competition headwork with skunk2 stag2 cams and skunk2 valvetrain. Along with an STR 70mm TB, skunk2 manifold, hondata manifold gasket, rc 310injectors, new ACT clutch type-r flywheel, B16 tranny, All tuned together with my hondata s200 unit. Going into my gutted 95eg hatch... Hoping to hit the 200hp mark with a good tune, what do you guys think?</TD></TR></TABLE>

I have almost the same setup as you except it is sleeved to 84mm with JE 12.5.1 pistons. Im hoping my injectors are big enough. I ordered my HeaderTech header last week also. I spoke to Red over there seemed really cool. So far I give HeaderTech . I hope it gets here soon!! I dont see any problem with you hitting 200hp. Good luck man!!

 

Well guess what dude, he told me the same thing when I ordered it 5 weeks ago and he charged me. I called today and his telephone is disconnected. No header and no replies to my emails. I'm getting a little pissed off!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 85mm LS VTEC &raquo;</TD></TR><TR><TD CLASS="quote">Well guess what dude, he told me the same thing when I ordered it 5 weeks ago and he charged me. I called today and his telephone is disconnected. No header and no replies to my emails. I'm getting a little pissed off!</TD></TR></TABLE>

****.. I called too. I got the same thing. Temporarally disconnected it says. WTF!! I left an email also. Hopefully I will get a reply. Can we keep this TTT untill everything is sorted out please. Getting a little annoyed myself!!

 

i have a headertech header with a jdm itr in an eg
12.70's
If you make 200 true whp...i don't see a problem with 12's

 

Sounds like a wicked N/A setup, good luck

 

damn you guys are getting me scared now.. Im sure he will come through from the reputation ive seen of him so far. Its been all positive. Hopefully. -paul

 

i too was told that i would receive my header in 2 weeks and now it has been 2 and a half months and still no header. my credit card was charged over a month ago!

 

call your CC company and have the charges reversed

 

Im going to call again in about an hour. I will let you know what happens. Still no reply to my email

 

Bump.
Called. Same response. No email response either.

 

PM him, he is on this board. Although if his phone is disconnected he might not have access to the internet.

 

over 8 weeks and paid by check. Promised it was being shipped out 2.5 weeks ago by Red. Well no header and I have no clue what to do.

 

Damn it!! I have the wrong base map in my car. It is running like complete garbage.. My exhuast came in today. I need this Header to tune my car. Now Im going to have to tune it with a shitty comptech 4-2-1 header with a small-*** collector. Now I have to tune twice. More money out the window.

 

you guys should just make your own headers...you know...get 4 of those bendable straws and slap'em on there. instant 65 horse power!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16vtecsol &raquo;</TD></TR><TR><TD CLASS="quote">you guys should just make your own headers...you know...get 4 of those bendable straws and slap'em on there. instant 65 horse power!!! </TD></TR></TABLE>

No sympathy..

 

Bad customer service = loss of new customers. SMSP takes a long time but at least he is honest with people up front. I don't think most of the people ordering from Header Tech would order another product if Enzo said it was going to take 3 months. There really are not that many more options of quality headers at that price so he has that segment of the market cornered. Just be honest with people.

 

I HATE to join the list TOO but I ordered my B20VTEC header 2 1/2mths ago and I have not recieved mine.....The phone is not working and my credit card was changed 3wks ago!! ENZO no longer works at headertech and I have been dealing with RED but NO HEADER!!!!!!! I am a SUP with a major credit card company and I have already made the call to have my charge reversed!!!!! EACH OF YOU CAN DO THE SAME.... I WANT THE HEADER but the SERVICE is SH@@!!! NO contact NO F@@Kin' MONEY!!!!

RED SHOULD GIVE US ALL A BIG DISCOUNT or WE SHOULD CANCEL THE ORDERS AND DO A GROUP BUY with someone else that want's to make money and knows how to do business!!!! I NEED MY HEADER ASAP!!!!

 

https://honda-tech.com/zero...78988

This is not good.

-sander

 

Please let Enzo explain whats going on before anyone gets heated.