intake manifold w/tb, some wiring harness ish, other stuff. very cheap-lots o pics
most stuff is for ef's and da's but will work in newer chasis cars.
<FONT SIZE="5">Seats</FONT>
usdm rear seats from a 4dr 90-93 teg. bolts into 4dr ef's. identical to the set that chad castelo had in his ef (jtuned volume 2). $make an offer. will trade for identical pattern seat but out of a 3dr teg.

will sell my whole set for the right price or for jdm si-r seats out of a 90-91 in acceptable condition. will also trade for usdm si seats (f and r) +cash.

fronts have custom rails to fit in 90-91 ef's homemade and welded by me. front seats not for sale-only avail. for trade on si/si-r seats.
<FONT SIZE="5">JDM/USDM/OE Parts</FONT>
OBD0/1 b16 complete intake manifold w/tb. includes everything that is attached to it in the pic. iacv is good. tps missing.
$40 shipped
SOLD to alwaystootall

white plug injectors and harness. section that is added to a dx harness for mpfi conversion.
$15 shipped

misc connectors. tell me which one you want by stating "2nd one from right" or along those lines. (coolant sensor connector/vtec solenoid connetor/misc white plug connectors-distributor)
$2 each shipped or 7 bux for all of them shipped

grey plug harness. appears to be b18a out of a 92-93 teg. don't remember. found it at my mom's house so it has been a few years.
$30 shipped

stock b16a1 exhaust manifold and downpipe. no o2 sensors included but has ports for 2 of them on teh back side fo the upper cast piece-good condition. if your downpipe is messed up you can have just the lower half and i will pitch teh top half.
$free plus shipping

nissan downpipe from a sr20 or ga16 sentra-can't tell without having one around to check it with. brand new-flex pipe section great for making test pipes out of. (it absorbs shock so you don't end up with cracked header welds)
$free plus shipping

kia something battery harness. good for the cable in it to make new grounds out of or one of those earth wire things.
$free plus shipping

90-93 integra intermediate shaft. required for bseries swap into an ef.
$40 shipped
pic uploaded shortly-gotta take it still
b18a thermostat housing with ect sensor (good)
$4 shipped

bseries fuel rail. no regulator. pulse dampener incl-does not leak.
$10 shipped

90-93 integra lower strut forks. fit ef's as well. not stretched or bent.
$free plus shipping

da hatch struts. good-not leaking.
$free plus shipping

pr3 power steering pump. good to my knowledge.
$free plus shipping

door speaker cups. i know these work in ef/eg/da. beyond that i am uncertain. $make an offer+shipping.

that's it...buy this stuff so i don't have to deal with moving it in may.
Modified by kylefakesi-r at 4:51 AM 4/13/2004
Modified by kylefakesi-r at 4:57 AM 4/13/2004
Modified by kylefakesi-r at 6:16 AM 4/14/2004
<FONT SIZE="5">Seats</FONT>
usdm rear seats from a 4dr 90-93 teg. bolts into 4dr ef's. identical to the set that chad castelo had in his ef (jtuned volume 2). $make an offer. will trade for identical pattern seat but out of a 3dr teg.

will sell my whole set for the right price or for jdm si-r seats out of a 90-91 in acceptable condition. will also trade for usdm si seats (f and r) +cash.

fronts have custom rails to fit in 90-91 ef's homemade and welded by me. front seats not for sale-only avail. for trade on si/si-r seats.
<FONT SIZE="5">JDM/USDM/OE Parts</FONT>
OBD0/1 b16 complete intake manifold w/tb. includes everything that is attached to it in the pic. iacv is good. tps missing.
$40 shipped
SOLD to alwaystootall

white plug injectors and harness. section that is added to a dx harness for mpfi conversion.
$15 shipped

misc connectors. tell me which one you want by stating "2nd one from right" or along those lines. (coolant sensor connector/vtec solenoid connetor/misc white plug connectors-distributor)
$2 each shipped or 7 bux for all of them shipped

grey plug harness. appears to be b18a out of a 92-93 teg. don't remember. found it at my mom's house so it has been a few years.
$30 shipped

stock b16a1 exhaust manifold and downpipe. no o2 sensors included but has ports for 2 of them on teh back side fo the upper cast piece-good condition. if your downpipe is messed up you can have just the lower half and i will pitch teh top half.
$free plus shipping

nissan downpipe from a sr20 or ga16 sentra-can't tell without having one around to check it with. brand new-flex pipe section great for making test pipes out of. (it absorbs shock so you don't end up with cracked header welds)
$free plus shipping

kia something battery harness. good for the cable in it to make new grounds out of or one of those earth wire things.
$free plus shipping

90-93 integra intermediate shaft. required for bseries swap into an ef.
$40 shipped
pic uploaded shortly-gotta take it still
b18a thermostat housing with ect sensor (good)
$4 shipped

bseries fuel rail. no regulator. pulse dampener incl-does not leak.
$10 shipped

90-93 integra lower strut forks. fit ef's as well. not stretched or bent.
$free plus shipping

da hatch struts. good-not leaking.
$free plus shipping

pr3 power steering pump. good to my knowledge.
$free plus shipping

door speaker cups. i know these work in ef/eg/da. beyond that i am uncertain. $make an offer+shipping.

that's it...buy this stuff so i don't have to deal with moving it in may.
Modified by kylefakesi-r at 4:51 AM 4/13/2004
Modified by kylefakesi-r at 4:57 AM 4/13/2004
Modified by kylefakesi-r at 6:16 AM 4/14/2004
thanks for the bump...if anyone is weary of asking cus i am not on here much just go to jdmc and look at my trader rating there.
Trending Topics
I want the nissan downpipe. How much shipped to Milwaukee, Wi 53210?
Please let me know.
Bee
Please let me know.
Bee
sorry, haven't updated in a while...everything is sold except the power steering pump, the b16a1 manifold, and the strut forks.
Thread
Thread Starter
Forum
Replies
Last Post
cor-e
Classifieds: Forced Induction
6
Nov 28, 2006 06:52 PM
nsxFletch
Acura Integra Type-R
1
Nov 17, 2006 12:20 PM



