FS: SMSP 2.5" test pipe (NEW)
Thread Starter
Joined: Oct 2003
Posts: 578
Likes: 0
From: Vancouver, BC, Canada
FS: SMSP 2.5" test pipe (NEW)
SMSP 2.5" test pipe for sale, never used
for B16A motor, can be fit B18C but need to cut shorter and weld back the flange.
trade my car for STI, so no longer need this.
65 shipped
for B16A motor, can be fit B18C but need to cut shorter and weld back the flange.
trade my car for STI, so no longer need this.
65 shipped
Thread Starter
Joined: Oct 2003
Posts: 578
Likes: 0
From: Vancouver, BC, Canada
Re: FS: SMSP 2.5" test pipe (SOL-R)
it's 16" long
if you have B16A header, it bolt right on
if you have B18C header, you need to cut 1 or 2 inch
edited: the length of the test pipe
Modified by SOL-R at 5:14 AM 4/9/2004
if you have B16A header, it bolt right on
if you have B18C header, you need to cut 1 or 2 inch
edited: the length of the test pipe
Modified by SOL-R at 5:14 AM 4/9/2004
Trending Topics
Thread Starter
Joined: Oct 2003
Posts: 578
Likes: 0
From: Vancouver, BC, Canada
Re: FS: SMSP 2.5" test pipe (infumus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by infumus »</TD></TR><TR><TD CLASS="quote">how much shipped to san jose, ca 95127?
thanks</TD></TR></TABLE>
65 shipped
i waited a month and half for this test pipe, you pay 65 now, will be at your door in a week
thanks</TD></TR></TABLE>
65 shipped
i waited a month and half for this test pipe, you pay 65 now, will be at your door in a week
Honda-Tech Member
Joined: Jan 2002
Posts: 5,178
Likes: 1
From: Raleigh, NC
Re: FS: SMSP 2.5" test pipe (SOL-R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOL-R »</TD></TR><TR><TD CLASS="quote">i think it's 11"
if you have B16A header, it bolt right on
if you have B18C header, you need to cut 1 or 2 inch</TD></TR></TABLE>
I thought you were blowing me off when you told me that earlier - of course, you did type 11' instead of 11".
It's longer than that from the picture though. If the tubing is 2.5" OD, then that makes the squares on the floor between 4 and 5" - making the overall length between 16 and 20" (probably about 16.5")
I think you're confusing people by saying B18C header. You'd be doing yourself a favor to go take the actual measurement. Several potential buyers, including myself, would come much closer to buying it.
if you have B16A header, it bolt right on
if you have B18C header, you need to cut 1 or 2 inch</TD></TR></TABLE>
I thought you were blowing me off when you told me that earlier - of course, you did type 11' instead of 11".
It's longer than that from the picture though. If the tubing is 2.5" OD, then that makes the squares on the floor between 4 and 5" - making the overall length between 16 and 20" (probably about 16.5")
I think you're confusing people by saying B18C header. You'd be doing yourself a favor to go take the actual measurement. Several potential buyers, including myself, would come much closer to buying it.
Thread Starter
Joined: Oct 2003
Posts: 578
Likes: 0
From: Vancouver, BC, Canada
Re: FS: SMSP 2.5" test pipe (JeffS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JeffS »</TD></TR><TR><TD CLASS="quote">
I thought you were blowing me off when you told me that earlier - of course, you did type 11' instead of 11".
It's longer than that from the picture though. If the tubing is 2.5" OD, then that makes the squares on the floor between 4 and 5" - making the overall length between 16 and 20" (probably about 16.5")
I think you're confusing people by saying B18C header. You'd be doing yourself a favor to go take the actual measurement. Several potential buyers, including myself, would come much closer to buying it. </TD></TR></TABLE>
thankz for correcting me...
coz Dave told me it's 11" long, so i always think it's 11"
I thought you were blowing me off when you told me that earlier - of course, you did type 11' instead of 11".
It's longer than that from the picture though. If the tubing is 2.5" OD, then that makes the squares on the floor between 4 and 5" - making the overall length between 16 and 20" (probably about 16.5")
I think you're confusing people by saying B18C header. You'd be doing yourself a favor to go take the actual measurement. Several potential buyers, including myself, would come much closer to buying it. </TD></TR></TABLE>
thankz for correcting me...
coz Dave told me it's 11" long, so i always think it's 11"
