unloading a crap load of stuff!
Thread Starter
Honda-Tech Member
Joined: Jan 2000
Posts: 1,199
Likes: 0
From: kildeer, IL
unloading a crap load of stuff!
*1998 Integra Type-R head with port and polishing by Portflow, head was decked .010", reworked combustion chambers, valve seat regrind, Ferrea stainless steel exhaust valves, Portflow inner valve springs, Crower outter valve springs, Crower titanium retainers, brand new intake manifold gasket, vtec solenoid, 2000 intake manifold, 2000 injectors, fuel rail, stock fpr, no t-body, no iac valve, no iat sensor, no valve cover - $1200
*Greddy 720cc peak/hold injectors, lucas style, brand spanking new, no miles, sealed in original packaging, will include 4 10-ohm high watt resistors - $425 shipped
*Moroso Aluminum extra capacity oil pan for vtec b series engines with Moroso oil pick up - $350
*EFI Missing Link Billet Check valve - $45
*J&S ultra safeguard version 2, knock sense retard, map sensor electronic limiter, boost / timing control, a/f gauge with normal and performance selection, a/f gauge and knock monitor, used for a month - $575
*Honda B16a2 stock cams off a 99-00 Civic Si with stock gears. - $75
*Honda 99-00 Civic Si b16a2 bare intake manifold - $50
*2000 Integra Type-R map sensor - $40 sold
*Acura B18C1 OBD2, stock ecu - $160
*Sparco red with black wear pads Torino Seat, mint condition, with rail fitting in 94-00 integras and 92-95 civics, fully reclineable, has stock seat belt latch, includes sliders too - $475
*Racing Hart CP-08 17x7 bronze wheels with 205/40/17 Z rated Yokohama A520 tires 80% thread, no curbing, 4x100 and 4x114 bolt pattern, 45mm offset, little scratches - $900
*Greddy Power Extreme exhaust for 94+ GSRs - $200
*Wings West W kit for 1998 and above Integras, side skirts, front lip, and rear lip (melted around exhaust tip location) - $300
*Fiberimages carbon fiber hood for 94+ integras - $300
*Comptech ITR wing with 3rd brake led light - $200
*Stock 1998 Acura Integra springs - $best offer
*2 94+ integra A/C compressors - $50 each
*2 94+ integra condensors - $50 each
*2 94+ integra dryers - $10 each
*2 94+ integra A/C fans - $20 each
*miscelaneous A/C related lines - $bo
*A/C components for sale were removed from integras 94-98
*I also have a lot of AN fittings from EARLS... if you want a braided fuel line with fittings and adapters from your fuel filter to aftermarket fuel rail, I can make you a kit. If you're looking for any other adapter or hoses, please contact me. I have about $1000 worth of fittings and hoses.*
paypal verified and prefered. thanks!
[Modified by TurboT, 8:14 AM 11/6/2001]
[Modified by TurboT, 7:32 AM 11/16/2001]
*Greddy 720cc peak/hold injectors, lucas style, brand spanking new, no miles, sealed in original packaging, will include 4 10-ohm high watt resistors - $425 shipped
*Moroso Aluminum extra capacity oil pan for vtec b series engines with Moroso oil pick up - $350
*EFI Missing Link Billet Check valve - $45
*J&S ultra safeguard version 2, knock sense retard, map sensor electronic limiter, boost / timing control, a/f gauge with normal and performance selection, a/f gauge and knock monitor, used for a month - $575
*Honda B16a2 stock cams off a 99-00 Civic Si with stock gears. - $75
*Honda 99-00 Civic Si b16a2 bare intake manifold - $50
*2000 Integra Type-R map sensor - $40 sold
*Acura B18C1 OBD2, stock ecu - $160
*Sparco red with black wear pads Torino Seat, mint condition, with rail fitting in 94-00 integras and 92-95 civics, fully reclineable, has stock seat belt latch, includes sliders too - $475
*Racing Hart CP-08 17x7 bronze wheels with 205/40/17 Z rated Yokohama A520 tires 80% thread, no curbing, 4x100 and 4x114 bolt pattern, 45mm offset, little scratches - $900
*Greddy Power Extreme exhaust for 94+ GSRs - $200
*Wings West W kit for 1998 and above Integras, side skirts, front lip, and rear lip (melted around exhaust tip location) - $300
*Fiberimages carbon fiber hood for 94+ integras - $300
*Comptech ITR wing with 3rd brake led light - $200
*Stock 1998 Acura Integra springs - $best offer
*2 94+ integra A/C compressors - $50 each
*2 94+ integra condensors - $50 each
*2 94+ integra dryers - $10 each
*2 94+ integra A/C fans - $20 each
*miscelaneous A/C related lines - $bo
*A/C components for sale were removed from integras 94-98
*I also have a lot of AN fittings from EARLS... if you want a braided fuel line with fittings and adapters from your fuel filter to aftermarket fuel rail, I can make you a kit. If you're looking for any other adapter or hoses, please contact me. I have about $1000 worth of fittings and hoses.*
paypal verified and prefered. thanks!
[Modified by TurboT, 8:14 AM 11/6/2001]
[Modified by TurboT, 7:32 AM 11/16/2001]
Thread Starter
Honda-Tech Member
Joined: Jan 2000
Posts: 1,199
Likes: 0
From: kildeer, IL
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jan 2000
Posts: 1,199
Likes: 0
From: kildeer, IL
Re: unloading a crap load of stuff! (2K_TEG)
lucas, i can't.... $45 is way cheaper than what i paid for it...
the WW kit is painted PPG yellow.... it's different than the ITR PY...
the WW kit is painted PPG yellow.... it's different than the ITR PY...
Honda-Tech Member
Joined: Sep 2000
Posts: 1,582
Likes: 0
From: Russian Mafia, dont, provoke, me
Re: unloading a crap load of stuff! (TurboT)
Ill take a lot of that stuff off your hands for asking price if you want to meet me on the Canadian side of the border. IE Windsor. I just dont need to pay anymore tax this year.
will take hood, pan, some an fittings, will even take STR manifold with TB.
let me know
will take hood, pan, some an fittings, will even take STR manifold with TB.
let me know
Junior Member
Joined: Jul 2001
Posts: 148
Likes: 0
From: New York, NY, USA
Re: unloading a crap load of stuff! (TurboT)
Where are you located? I am interested in the Fiber Images Carbon Fiber hood for the Integra and the Comptech wing. Can you email me a pic of the wing.
Thread Starter
Honda-Tech Member
Joined: Jan 2000
Posts: 1,199
Likes: 0
From: kildeer, IL
Re: unloading a crap load of stuff! (typerturbo)
rtype11...
uh... hm....
i'll have to get back to you on that proposal
typerturbo...
i'm in chicago... or at least near it...
the wing is exactly as seen in comptech's site...
lemme see if i can find something
uh... hm....
i'll have to get back to you on that proposal
typerturbo...
i'm in chicago... or at least near it...
the wing is exactly as seen in comptech's site...
lemme see if i can find something
Thread Starter
Honda-Tech Member
Joined: Jan 2000
Posts: 1,199
Likes: 0
From: kildeer, IL
Re: unloading a crap load of stuff! (TurboT)
*J&S ultra safeguard version 2, knock sense retard, map sensor electronic limiter, boost / timing control, a/f gauge with normal and performance selection, a/f gauge and knock monitor, used for a month - $575 shipped.... barely used...*J&S ultra safeguard version 2, knock sense retard, map sensor electronic limiter, boost / timing control, a/f gauge with normal and performance selection, a/f gauge and knock monitor, used for a month - $575 shipped.... barely used...
New User
Joined: Aug 2001
Posts: 158
Likes: 0
From: houston, tx, us
Re: unloading a crap load of stuff! (TurboT)
Thread Starter
Honda-Tech Member
Joined: Jan 2000
Posts: 1,199
Likes: 0
From: kildeer, IL
Re: unloading a crap load of stuff! (TurboT)