FS 95 Civic Cx, w/B16A2,1.7,Toda,Spoon,ATS(FL)
1995 Civic CX, Milano red,Paint is in excellent conditon, regular parking lot door dings. Black interior.
12k miles on full rebuild 150,xxx on chasiss. Dynoed 183 hp and 125 tq
2000 B16A2 w/ ITR tranny W/ LSD
ATS 3,4,5 Gears
Spoon flywheel
ITR clutch
ITR tranny brace
ITR shift linkage with ITR shift ****
Toda spec A cams with Toda cam gears
Portflow inner springs & retainers
ITR outer springs
B&M fuel regulator
CTR pistons with 93 GS-R crank & rods = 1.7L
Toda header
Tanabe Racing Medallion exhuast
CTR N1 crank pulley
Fluidyne radiator
Comptech Icebox
Walbro fuel pump
Kenji chipped P28 w/skunk2 program
*Tokico Illumina shocks with Skunk2 coilovers. ITR shock tower bushings
SPC lower control arms,
1996 GS-R rear disc coversion. *Goodridge steel braided lines.
*New pads and rotors from Honda front and rear.
*HX wheels with 195/55 14 *Toyo T1-S. *Skunk2 lugnuts
1995 Grey cloth GS-R seats. Integra checkerd style floormats. No carpert.
No ac from factory.
EX cluster with tach.I have also added*EX front chin spoiler.
I have replaced *rain gutter moldings and *upper door moldling.
JDM Antenna block off plate.
New battery, cap, rotor, fuel filter, and clutch master. All this on top of a FULL rebuild, Every new gasket, seal, and pump has been replaced. I am located in Naples Fl Email wlw45j@aol.com for fastest response for any ?'s or pictures. Asking $8000
Links to pics at
http://share.shutterfly.com/ac...g&m=1
Modified by JDMkoupe at 8:15 PM 4/5/2004
Modified by JDMkoupe at 7:44 PM 8/27/2004
Modified by JDMkoupe at 7:45 PM 8/27/2004
Modified by JDMkoupe at 3:22 PM 11/25/2004
Modified by JDMkoupe at 6:35 PM 11/25/2004
Modified by JDMkoupe at 7:04 PM 1/6/2005
Modified by JDMkoupe at 8:18 PM 5/16/2005
12k miles on full rebuild 150,xxx on chasiss. Dynoed 183 hp and 125 tq
2000 B16A2 w/ ITR tranny W/ LSD
ATS 3,4,5 Gears
Spoon flywheel
ITR clutch
ITR tranny brace
ITR shift linkage with ITR shift ****
Toda spec A cams with Toda cam gears
Portflow inner springs & retainers
ITR outer springs
B&M fuel regulator
CTR pistons with 93 GS-R crank & rods = 1.7L
Toda header
Tanabe Racing Medallion exhuast
CTR N1 crank pulley
Fluidyne radiator
Comptech Icebox
Walbro fuel pump
Kenji chipped P28 w/skunk2 program
*Tokico Illumina shocks with Skunk2 coilovers. ITR shock tower bushings
SPC lower control arms,
1996 GS-R rear disc coversion. *Goodridge steel braided lines.
*New pads and rotors from Honda front and rear.
*HX wheels with 195/55 14 *Toyo T1-S. *Skunk2 lugnuts
1995 Grey cloth GS-R seats. Integra checkerd style floormats. No carpert.
No ac from factory.
EX cluster with tach.I have also added*EX front chin spoiler.
I have replaced *rain gutter moldings and *upper door moldling.
JDM Antenna block off plate.
New battery, cap, rotor, fuel filter, and clutch master. All this on top of a FULL rebuild, Every new gasket, seal, and pump has been replaced. I am located in Naples Fl Email wlw45j@aol.com for fastest response for any ?'s or pictures. Asking $8000
Links to pics at
http://share.shutterfly.com/ac...g&m=1
Modified by JDMkoupe at 8:15 PM 4/5/2004
Modified by JDMkoupe at 7:44 PM 8/27/2004
Modified by JDMkoupe at 7:45 PM 8/27/2004
Modified by JDMkoupe at 3:22 PM 11/25/2004
Modified by JDMkoupe at 6:35 PM 11/25/2004
Modified by JDMkoupe at 7:04 PM 1/6/2005
Modified by JDMkoupe at 8:18 PM 5/16/2005
Trending Topics
Interested in your ITR tranny with ATS gears. I only need the tranny without the clutch, flywheel, brace, and linkage. Are you willing to sell just the tranny, if so how much?
Please PM me. Thanks
Please PM me. Thanks



