Anybody know where I could buy the Connectors plugs for the SIR cluster?


Modified by shawn_crx at 12:51 PM 4/7/2004

 

anybody?

 

You can modify the USDM plugs to work... The middle plug is a stock 4g 8 pin plug, fits fine. The plug on the right side is the stock 4g 12 pin plug that the outside wire on each side has been shaved off to fit in the slot. The plug on the left is the same 8 pin plug that is in the middle except the outside pin on each side have been cut out. So you will need to get a extra 8 pin cluster plug from the junkyard.

Here is the modified 12 pin plug


This will not get the green plug for the little 'car' that shows if the doors/hatch is ajar working but it's better than nothing.

And if you're wondering the two milky white connectors are from an '88 and the gray one is a '91 style plug.