ok have a few things up for sale

Crower Cams 63401(stage 1's) less then 1K on them....$500

set of four PR3 Pistons w/ rods about 30K on them! $100 OBO

RS Machine Cams less then 500 miles $600

GSR Intake Manifold..Bare...$70

ITR Intake Manifold $150


Hondata IM GSR gasket...$70


Skunk2 IM GSR NEW $270




SPECIAL DEAL.....SKUNK2 IM with Hondata IM gasket....$300

SR20DET swap uncut Harness...with R32 SKYLINE Tranny 5 spd
$2000 OBO no ECU

Racing Hart C2's 17" 205x40 Falken ZE 502 45% tread but 2 tires have sidewall cracks....$600 obo 4x100 and 1x114

ITR 4x114 wheels with tires
$500 OBO



JDM ITR wheels w/o tires $450
W tires $650....OBO ~~~~PENDING





ITR's with tires $500 OBO






Modified by SnoFlake EG at 4:04 PM 4/3/2004

 

Are you kidding me? Why are you letting this stuff go so cheap?

 

just....faster sel adn im a good seller!!!

 

Well take your "rule of thumb" and apply it to a 5 lug brake swap for me!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ^jefs0ng &raquo;</TD></TR><TR><TD CLASS="quote">Well take your "rule of thumb" and apply it to a 5 lug brake swap for me!</TD></TR></TABLE>

hahah you funny!!!!!! now i aint that nice!!!!!

 

morning

 

i got first dibs on the jdm itr wheels

 

 

pm sent...interested in more than one item

 

pm

 

 

I kinda want those jdm itrs.. they're clean as a mother..

 

buy them so i can put it towards my turbo set up

 

But I'm about to purchase 2 sets of wheels already.. (red and blue 3 letter rims.. care to guess? )

 

Baller seats

 

wasup im interested in those seats holla at me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ^jefs0ng &raquo;</TD></TR><TR><TD CLASS="quote">But I'm about to purchase 2 sets of wheels already.. (red and blue 3 letter rims.. care to guess? )</TD></TR></TABLE>

APC makes wheels now?

Bump for you... werent you at the meet in fresno a few months back?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rollinonfifteens &raquo;</TD></TR><TR><TD CLASS="quote">

APC makes wheels now?

Bump for you... werent you at the meet in fresno a few months back?</TD></TR></TABLE>

Starts with a C has a - and ends with an R. One has blue stickers one set has red.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ^jefs0ng &raquo;</TD></TR><TR><TD CLASS="quote">

Starts with a C has a - and ends with an R. One has blue stickers one set has red.</TD></TR></TABLE>

CBR? You puttin motocyoh rims on yo car?

 

would u sell the complete 5 lug setup???

 

bump for some crackhead prices!

what kind of power did the motor put down on the dyno?
&lt;- robert w/ the silver crx from volcano.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmwanabe &raquo;</TD></TR><TR><TD CLASS="quote">wasup im interested in those seats holla at me </TD></TR></TABLE>

throw me a offer and we can work off that

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rollinonfifteens &raquo;</TD></TR><TR><TD CLASS="quote">

APC makes wheels now?

Bump for you... werent you at the meet in fresno a few months back?</TD></TR></TABLE>

HaHaHaHa always trying to be different!!! LOL<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phan &raquo;</TD></TR><TR><TD CLASS="quote">bump for some crackhead prices!

what kind of power did the motor put down on the dyno?
&lt;- robert w/ the silver crx from volcano. </TD></TR></TABLE>

whats up yo! it laid 181WHP all from a Stock block so im happy ive seen dynos with ctr/itr pistons lay about the same or less so im happy for that "UNTOUCHED" C1 block! shyt GSR's lay down 155ish stock so i got about 30 out of my head and cams!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SnoFlake EG &raquo;</TD></TR><TR><TD CLASS="quote">up yo! it laid 181WHP all from a Stock block so im happy ive seen dynos with ctr/itr pistons lay about the same or less so im happy for that "UNTOUCHED" C1 block! shyt GSR's lay down 155ish stock so i got about 30 out of my head and cams!</TD></TR></TABLE>

nice! but i see you're going turbo now? damn, you're going to make some SERIOUS power...

 

i might i might we'll see just testing the waters you now! if not ill build or buy a built block!!!! and stay all mota!

 

ttt