Well Its finally done, one of the many things I was dreading to do... Fill the hole in my GSR where the Sunroof once sat. I ended up using 20 gauge steel and a lot of patience and pop rivits. Enjoy










Let me know what you think!

 

those sharp edges look painful.. otherwise, not bad to me..

 

Great point... Thats next weekends project. Cut all the excess down and sand it clean.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTECAcuraGSR &raquo;</TD></TR><TR><TD CLASS="quote">Great point... Thats next weekends project. Cut all the excess down and sand it clean.</TD></TR></TABLE>

Instead of cutting it down, is there a way to roll it up? Seems that would be less likely to be sharp - I'd guess cutting and sanding would leave edges sharp enough to cut.

 

Or if you can't roll it, bend it back on itself. Anything's better than cut metal.