I don't think it starting hissing before but now it's doing it? Is it broken?

it's freakin leaking from the 3rd hole!! sucking in air

hissssssssssssssssssss....

edit: we-todd sucks

so here it is on imagestation

http://www.imagestation.com/vi...39319




Modified by accordfreak at 5:33 PM 2/28/2004

 

Nope, not normal. I think possibily the silinoid might be trashed

 

dude...

why do i even buy greddy products?!?

1st... the pipe inside the greddy muffler rusts and breaks off

2nd... my stupid greddy boost gauge doesn't read at zero when powered on

3rd... now this!! my solenoid has a fat *** leak now???


i only had this controller for about 2 months!! It just started last week when it started to do this.

note to self: never buy crappy greddy products!

 

sorry to hear that.. that's why you go with the best and get the Blitz SBC you need to get the Blitz ID meter to make them look good =P

 

You might try to see if you can get the silinoid replaced under warranty. Try where you purchased it from.

 

hmm i bought it from a private party.

ANY GREDDY DEALER REPRESENTATIVES that can help me out?

 

damn greddy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordfreak &raquo;</TD></TR><TR><TD CLASS="quote">
2nd... my stupid greddy boost gauge doesn't read at zero when powered on
</TD></TR></TABLE>

because your not perfectly at sea level

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHCArchangel &raquo;</TD></TR><TR><TD CLASS="quote">

because your not perfectly at sea level</TD></TR></TABLE>

? but it used to read at zero when powered on (Car off).. now it doesn't..

 

I have the greddy profect B spec 2 and the boost gauge. The only problem so far is the gauge fogs up every once in a while.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordfreak &raquo;</TD></TR><TR><TD CLASS="quote">

? but it used to read at zero when powered on (Car off).. now it doesn't.. </TD></TR></TABLE>

atmospheric pressure changes with the weather as well

 

why not call Greddy and talk to the reps or call the place u bought it from.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FredoSP &raquo;</TD></TR><TR><TD CLASS="quote">why not call Greddy and talk to the reps or call the place u bought it from.</TD></TR></TABLE>

because their customer service is just about the worst over any company in this industry

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">

because their customer service is just about the worst over any company in this industry</TD></TR></TABLE>

AMEN to that!

 

You're right about that one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">because their customer service is just about the worst over any company in this industry</TD></TR></TABLE>

Very true. The charge pipe bracket after my intercooler snapped off at the weld. Greddy wouldn't send me a new one until I sent the old one back and the part needed to be ordered from Japan. This would take at least 2 months, so I offered to buy a new one from them, only they wouldn't give me a special deal through them, but gave me the number of an authorized dealer who wanted $150! This would also take months to arrive from Japan. **** Greddy.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16A Grenade &raquo;</TD></TR><TR><TD CLASS="quote">

Very true. The charge pipe bracket after my intercooler snapped off at the weld. Greddy wouldn't send me a new one until I sent the old one back and the part needed to be ordered from Japan. This would take at least 2 months, so I offered to buy a new one from them, only they wouldn't give me a special deal through them, but gave me the number of an authorized dealer who wanted $150! This would also take months to arrive from Japan. **** Greddy.</TD></TR></TABLE>

exactly!