I have a FULLY BUILT B16A2 block for sale. Asking 1000 USD plus shipping...

B16A2:

-JG EngineDynamics T sleeves--genII
-Wiesco 8.5 comp. pistons(82mm)
-Eagle H-beam rods
-Micropolished and balanced crank
-Custom ARP main studs(bigger)
-All new seals(main seal, oil pump seal)
-Assco flywheel (replacable surface)
-Stock crank pulley
p.s. this is a complete block in one piece and was running and will still run, Im just changing the seals cause i dont want any complaints of the block etc...
---14xxx miles on block--- NOTHING wrong with this block!!! Guarunteed to be in great wowrking condition. Selling due to second child so my car has to be parted out

PIX upon request please and leave your email address if you want pix...

Thanks

 

pm send

 

pm'ed ya back

 

u really think $1000 is goin to help u w/ a 2nd child... i would get another jobby b4 sold i nice set up like that... im sure u invested alot more than $1000 in that block... But good luck w / tha sale..

bump

 

How many lbs. of boost were you running on that setup??

 

can you send me some pics to blueb18c5@aol.com

 

I took some pics of his block...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TURBO4drTypeR &raquo;</TD></TR><TR><TD CLASS="quote">I have a FULLY BUILT B16A2 block for sale. Asking 1000 USD plus shipping...

B16A2:

-JG EngineDynamics T sleeves--genII
-Wiesco 8.5 comp. pistons(82mm)
-Eagle H-beam rods
-Micropolished and balanced crank
-Custom ARP main studs(bigger)
-All new seals(main seal, oil pump seal)
-Assco flywheel (replacable surface)
-Stock crank pulley
p.s. this is a complete block in one piece and was running and will still run, Im just changing the seals cause i dont want any complaints of the block etc...
---14xxx miles on block--- NOTHING wrong with this block!!! Guarunteed to be in great wowrking condition. Selling due to second child so my car has to be parted out

PIX upon request please and leave your email address if you want pix...

Thanks </TD></TR></TABLE>

good deal

 

Bump for a great deal!

 

Thanks for the bumps guys

 

PM'd you

 

Nice settup you got there! I want to test that Vortech SC someday

 

e-mail me at

abe_samaniego@yahoo.com

about this block.

i'm in texas and have cash

 

AIM turbo4drtypeR or pm me

 

Sorry to tell you guys, But the block was sold to a fellow H-T member [hybridtech]... Nice guy, so I can vouch for him buying stuff from ya He drove about 4hrs to come get it so that should count for a serious buyer.....

SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

I took the block to a machine shop to change the main seal and check for any hidden damages. They gave me a list of problems. I will make a copy of it and mail it to you tommarrow along with the copy of the sales reciept. Here is the link of the pictures I took.
http://f1.pg.photos.yahoo.com/.../c145
Since you said if I had any trouble with the motor you would give me a refund, I wanna see if we could work some kind of deal, so I would not have to drive back to Houston to return it. They said that they would have to bore it because the sleeves have deep scratches, so the current piston will not work.(but they are in good shape), they also said the oil pump had crap in it and it was about to go out, one of the bearings was spun and all the rods had signs of high heat temp from possible spun bearings, but the bearings had been replaced. The rods are still ok but they will have to grinded some and the crank will also have to have some grind work. They said the piston size is about 81.5mm, also the pilot bearing was locked up on the flywheel.

 

wow, and to think it was a good deal, some things are just to good to be true

 

My deals are good to be true so before anyone has any negative remarks just save your breath! I am a man of my word so as far as the block being bad, I will either help pay some of the rebuild, donate some parts, or just simply return his money And hybribtech please feel free to Pm me or whatever to straighten this mess out. I appologize for any inconveinence. Or I can call you over the weekend I still have your number.

 

now thats a good seller..steppin up to the plate to make things right!

 

yeap a great seller

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TURBO4drTypeR &raquo;</TD></TR><TR><TD CLASS="quote">My deals are good to be true so before anyone has any negative remarks just save your breath! I am a man of my word so as far as the block being bad, I will either help pay some of the rebuild, donate some parts, or just simply return his money And hybribtech please feel free to Pm me or whatever to straighten this mess out. I appologize for any inconveinence. Or I can call you over the weekend I still have your number.</TD></TR></TABLE>

 

I can't use PM from my home computer it doesn't work, I will PM tonite when I get to work.

 

What do you guys think? (H-T Members)

Option1: Give new bearings, Crank, and ITR oilpump
Option2: Give Bigger bore pistons and pump

I cannot refund him money due to the agreement( I gauranteed him it will be running fine or money back) I honestly did not know it is bad. It ran just fine in my car. As the money part I have invested in opening 2 of my own bussiness to better take care of my family. So here I am trying to defend my good name and make this guy a happy camper This whole deal is a long story that I will not go into details.

But I would like some suggestions from H-T members please

Thank You for your time!

 

Option 2.

 

#2