I have a mild all motor h22 build w/ type S pistons, I currently have Skunk2 stage 1 cams, but would like to upgrade to stage 2 cams. Do I have enough valve clearance for this upgrade?

 

i'm pretty sure that u could run the 2's considering the type s pistons dont have the huge dome on them.... i would clay the motor to be sure

 

be careful..i know stage 1 is only a mild lift cam, however the 2's would probably be a good idea to pull the head and clay it. Especially so if youre unsure of how much clearance you currently have...

what kind of valve reliefs do the type s pistons have BTW??

 

up

 

I know with all the smart bastages on this site, someone can give me a def answer so i dont have to rip apart my motor and clay it

 

I have Crower Stage 2's, Type-S pistons, and a 0.020 milled head with no clearance problems. I accidentally had each cam gear retarded a tooth and ran the motor for 3 days until I figured out that was the cause of my problems. No clearance problems, no bent valves. You should be just fine.