Well, I did this awhile ago when my friend wrecked his EK....lucky Jon you


And finally decided to post some pics up....I'll have a write up in a little bit...time to go have fun
Short term Fall and Winter mod for all the drives across state I make to the parents house. IT's coming back out in the next month when the Autopower bar and seat go in....







img]http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQzMDUyNnM0MTNkZmQzMXk1NDE%3D.jpg[/img]

Not QUITE OEM as I'd like...but it fits VERY well for little hacking...

 

Where did you cut, yO.....that is nice. I want...I want...The cup holders/ extra din is sweet

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GTlvr82 &raquo;</TD></TR><TR><TD CLASS="quote">Where did you cut, yO.....that is nice. I want...I want...The cup holders/ extra din is sweet</TD></TR></TABLE>

seriously....I can actually fit a drink in there

The arm rest is probably 3x bigger than the EG one also...I can fit like 4 CD's and my tire pressure gauge in there.

You need to cut some of the panel that holds the lighter and pocket, and then some of the tin behind that....took about an hour to make it fit perfect. I can kick it and it won't move

 

nice write up

 

it's not bad, not bad at all. i like it a lot!! i'm digging the BIG cupholders.

 

I want to do this in my car also. Is there any modifications you need to do. Or does it just bolt right in. I heard it bolt's right in. I just want to double check. And when your sitting in your car is the gap under the ash tray the only gap that is noticeable, and how noticeable is it??

Because I've thought about getting the EK console, or just getting a Integra GSR Dash cuz I have the full center console for the integra.... Please let me know. Thank you.

 

Damn if i didnt have an Audio Console....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by compwc18 &raquo;</TD></TR><TR><TD CLASS="quote">I want to do this in my car also. Is there any modifications you need to do. Or does it just bolt right in. I heard it bolt's right in. I just want to double check. And when your sitting in your car is the gap under the ash tray the only gap that is noticeable, and how noticeable is it??

Because I've thought about getting the EK console, or just getting a Integra GSR Dash cuz I have the full center console for the integra.... Please let me know. Thank you.</TD></TR></TABLE>

when sitting in the car, you can't see any gaps or anything. I took pictures of the worst angles, to try and not mislead anyone about how it fits.

It's pretty straight forward. You have to hack the panel that holds the pocket, under the lighter, and cut away some metal behind that. Then it drops right in

 

Emerika did it so his Super Big Gulps from 7/11 would fit better...

 

looks good..i like it alot...now I need to search for a EK console and armrest.....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SkyeC &raquo;</TD></TR><TR><TD CLASS="quote">Emerika did it so his Super Big Gulps from 7/11 would fit better... </TD></TR></TABLE>

110% truth, I won't even argue

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IntegraXSi &raquo;</TD></TR><TR><TD CLASS="quote">Damn if i didnt have an Audio Console....</TD></TR></TABLE>

me too man, me too

but i dunno now...i might actually sell my console and get that just for the cup holders...i only bought the console to drop the head unit and put gauges where my stock radio would go, but with this i can have that AND still retain my cup holders...hmm

 

bump for write up...

 

looks good. are you planning to spray it black?

 

nice

 

looking good

 

sick imunna do thaat

 

how about the shifter? it looks like it will run into the top when shift into first
or is it jst the camera angle

 

I think I am going to do this instead of trying to locate the eg armrest and audio console.

 

i did this tonight, i put it in.good fit, but i have a small short shifter and like 1st and 3rd gear are close to the top of the console part,but no complaints. i like it alot.

 

looks very fresh!! very cleaver i never even thought about that! So is the armrest a little bigger at all than an EG one? Bump bump for a write up!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by twisted_1 &raquo;</TD></TR><TR><TD CLASS="quote">looks very fresh!! very cleaver i never even thought about that! So is the armrest a little bigger at all than an EG one? Bump bump for a write up!!</TD></TR></TABLE>
arm rest is bigger than the EG one, and the pocket holds a lot more...lol

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">how about the shifter? it looks like it will run into the top when shift into first
or is it jst the camera angle
</TD></TR></TABLE>

nice observation!. The shifter does sit a little more forward in the EK boot....but you still have plenty of movement. When it's in neutral, it loks like 1st with a short shifter.

 

damn looks like i have a new project

 

I hate you Emerika...you do too much cool stuff...
I have a dremel...would that suffice for cutting and what not...Ima go get one today (monday)....This local parts store (JDMSTAR) gets rid of stuff for seriously cheap. My buddie got used but still in super clean, running shape...Zeal shocks for his eg PLUS type R rear lowers for 400 bucks...no bullshit. I can prob. get that fO cheap.

 

dope man....I used some metal snips....10 bucks at Sears

You will see where you need to trim to slide the cup holder assembly into

OH and to add one more thing....

I made a little metal support that fit under the pcket part of the cup holder. I bent each side and used a nut and bolt into the side of the console, you will see in the pic the phillips head.

This will add some support to the cup holder and pocket for heavie objects