what color wire on MAP sensor goes where? obd1
Joined: Aug 2002
Posts: 5,724
Likes: 1
From: Hillburn, NY, USA
Re: what color wire on MAP sensor goes where? obd1 (civicracer1993)
On my ODB0 MAP:
Black wire = ground (constant 0 volts)
Red wire = constant 5v power (constant 5 volts)
Green wire = MAP output voltage (variable voltage)
Im pretty sure all Honda MAP sensors follow the same principle tho...regardless of OBD version
Black wire = ground (constant 0 volts)
Red wire = constant 5v power (constant 5 volts)
Green wire = MAP output voltage (variable voltage)
Im pretty sure all Honda MAP sensors follow the same principle tho...regardless of OBD version
Junior Member
Joined: Jun 2003
Posts: 999
Likes: 2
From: Northern VA, USA
Re: what color wire on MAP sensor goes where? obd1 (xenocron)
The '93 harness is a obd-1 harness and i believe the colors are different from the obd0 harness plug for the map sensor.
Here's my obd-1 MAP sensor plug wire colors and there pinouts:
white--> D17 MAP Sensor Input About 3v
yellow/green--> D19 Reference Voltage About 5v With key on, engine off
green/blue--> D21 Sensor Ground Less Than 1v
Here's my obd-1 MAP sensor plug wire colors and there pinouts:
white--> D17 MAP Sensor Input About 3v
yellow/green--> D19 Reference Voltage About 5v With key on, engine off
green/blue--> D21 Sensor Ground Less Than 1v
Thread
Thread Starter
Forum
Replies
Last Post
Gant
Honda CRX / EF Civic (1988 - 1991)
6
May 18, 2005 08:47 PM
