FS: built LS short block and other goods!
FS Built LS short block
B18a block assembled by CHEETAH. Used for about 5-6k miles and 20-30 passes. motor was carefully broken in and meticulously maintained. with a B16 head and mild tuning the motor made 215 HP and ran a best of 12.94@104 mph in a 2200lb car.
block includes:
ENDYN 81.5 mm high compression pistons (up to 12.5:1)
Eagle connecting rods
Z10 girdle
GSR oil pan, pickup
type-r/B20 oil pump
honda water pump, bearings, gaskets
block has nipples and plug for ENDYN breather kit
ill even throw in a new timing belt and a few oil filters
$2600 obo
this is a streetable motor that can run on pump gas. a custom programmed ecu is available to suit the buyers needs. heres a pic of the block pre installation.
also available:
-Toda flywheel-350 obo
-Clutch Masters stage 3 disk and pressure plate (small spline)-325 obo
will sell as a package for 650
purchaser of the block can get the package for 625
-Accel DFI 6.0 with harness-450 obo SALE PENDING
bumps are welcomed. PM me with any offers.
-Roger
Modified by E-Town4229 at 8:26 PM 1/31/2004
B18a block assembled by CHEETAH. Used for about 5-6k miles and 20-30 passes. motor was carefully broken in and meticulously maintained. with a B16 head and mild tuning the motor made 215 HP and ran a best of 12.94@104 mph in a 2200lb car.
block includes:
ENDYN 81.5 mm high compression pistons (up to 12.5:1)
Eagle connecting rods
Z10 girdle
GSR oil pan, pickup
type-r/B20 oil pump
honda water pump, bearings, gaskets
block has nipples and plug for ENDYN breather kit
ill even throw in a new timing belt and a few oil filters
$2600 obo
this is a streetable motor that can run on pump gas. a custom programmed ecu is available to suit the buyers needs. heres a pic of the block pre installation.
also available:
-Toda flywheel-350 obo
-Clutch Masters stage 3 disk and pressure plate (small spline)-325 obo
will sell as a package for 650
purchaser of the block can get the package for 625
-Accel DFI 6.0 with harness-450 obo SALE PENDING
bumps are welcomed. PM me with any offers.
-Roger
Modified by E-Town4229 at 8:26 PM 1/31/2004
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxgator »</TD></TR><TR><TD CLASS="quote">dam whats next for the rex...a h22a...
</TD></TR></TABLE>
lol nah man just a bigger better B.
-Roger
</TD></TR></TABLE>lol nah man just a bigger better B.
-Roger
Trending Topics
ill trade you a complete ls/vtec longblock
ls block
usdm itr pistons
arp rod bolts
arp headstuds
b16a head
p30 intake manifold
ctr flywheel
aem fuel rail
new bearings
itr oil pump
itr water pump
itr timmingbelt
ect.. let me know if your intrested.
ls block
usdm itr pistons
arp rod bolts
arp headstuds
b16a head
p30 intake manifold
ctr flywheel
aem fuel rail
new bearings
itr oil pump
itr water pump
itr timmingbelt
ect.. let me know if your intrested.
thanks for the bumps again guys. if only i had enough SERIOUS buyers as i had bumps.
i really dont want to have to start the season with this bottomend unless i have to. give me some good offers or trades people. im not unreasonable.
-Roger
i really dont want to have to start the season with this bottomend unless i have to. give me some good offers or trades people. im not unreasonable.
-Roger
Honda-Tech Member
iTrader: (2)
Joined: Mar 2002
Posts: 5,828
Likes: 1
From: Woodbridge, NJ, Middlesex
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AlphaMike »</TD></TR><TR><TD CLASS="quote">bump for big rog</TD></TR></TABLE>
lol, he aint that big he still fits inside my s2k ...
lol, he aint that big he still fits inside my s2k ...


