NEw #'s Stock LS turbo @ 12psi
#1
Thread Starter
Join Date: Oct 2003
Location: DFW, TX
Posts: 2,806
Likes: 0
Received 0 Likes
on
0 Posts
NEw #'s Stock LS turbo @ 12psi
finally put in the 3bar map sensor and turned up the boost a little bit
323hp and 270tq !! i'll post dyno sheet later .. we-todd-did is down right now
Once again thanks to Stoney, Felix, Jarrett and VSV for the great numbers!!
323hp and 270tq !! i'll post dyno sheet later .. we-todd-did is down right now
Once again thanks to Stoney, Felix, Jarrett and VSV for the great numbers!!
#7
Thread Starter
Join Date: Oct 2003
Location: DFW, TX
Posts: 2,806
Likes: 0
Received 0 Likes
on
0 Posts
Re: (b20turbojason)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20turbojason »</TD></TR><TR><TD CLASS="quote">that was a fast post. weren't you just there at vsv. i heard about that 323hp bad *** numbers.what boost was that on.</TD></TR></TABLE>
ya i was just at VSV ... my boost is in the 12's, my map sensor wasn't giving a boost readout, but the boost cut is @ 13psi so its under that
ya i was just at VSV ... my boost is in the 12's, my map sensor wasn't giving a boost readout, but the boost cut is @ 13psi so its under that
Trending Topics
#9
Smarter than you
iTrader: (1)
Join Date: Apr 2001
Location: Third Coast, united states
Posts: 8,240
Likes: 0
Received 2 Likes
on
2 Posts
Re: (B18bEK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18bEK »</TD></TR><TR><TD CLASS="quote">
ya i was just at VSV ... my boost is in the 12's, my map sensor wasn't giving a boost readout, but the boost cut is @ 13psi so its under that </TD></TR></TABLE>
woah woah woah. ur map sensor isn't giving a read out? how are u tuning then? ur boost cut works off the map sensor, so no map sensor = no boost cut.
ya i was just at VSV ... my boost is in the 12's, my map sensor wasn't giving a boost readout, but the boost cut is @ 13psi so its under that </TD></TR></TABLE>
woah woah woah. ur map sensor isn't giving a read out? how are u tuning then? ur boost cut works off the map sensor, so no map sensor = no boost cut.
#11
Thread Starter
Join Date: Oct 2003
Location: DFW, TX
Posts: 2,806
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DIRep972)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DIRep972 »</TD></TR><TR><TD CLASS="quote">
woah woah woah. ur map sensor isn't giving a read out? how are u tuning then? ur boost cut works off the map sensor, so no map sensor = no boost cut.</TD></TR></TABLE>
just went and talked to stoney again. its reading boost it was just hooked up to the computer wrong. its hitting boost cut b/c i already hit it a couple times on the highway
woah woah woah. ur map sensor isn't giving a read out? how are u tuning then? ur boost cut works off the map sensor, so no map sensor = no boost cut.</TD></TR></TABLE>
just went and talked to stoney again. its reading boost it was just hooked up to the computer wrong. its hitting boost cut b/c i already hit it a couple times on the highway
#17
Honda-Tech Member
Join Date: Dec 2000
Location: Pa
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEw #'s Stock LS turbo @ 12psi (B18bEK)
I'd love to see a better pic of that graph and turbo specs. It looks like your torque starts to drop right about the same point mine does. Only 12 psi too. Nice. What was your ignition advance at? 323 whp stock LS.
#19
Smarter than you
iTrader: (1)
Join Date: Apr 2001
Location: Third Coast, united states
Posts: 8,240
Likes: 0
Received 2 Likes
on
2 Posts
Re: (B18bEK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18bEK »</TD></TR><TR><TD CLASS="quote">
just went and talked to stoney again. its reading boost it was just hooked up to the computer wrong. its hitting boost cut b/c i already hit it a couple times on the highway </TD></TR></TABLE>
ok cool. just making sure its working.
just went and talked to stoney again. its reading boost it was just hooked up to the computer wrong. its hitting boost cut b/c i already hit it a couple times on the highway </TD></TR></TABLE>
ok cool. just making sure its working.
#21
Thread Starter
Join Date: Oct 2003
Location: DFW, TX
Posts: 2,806
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DIRep972)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DIRep972 »</TD></TR><TR><TD CLASS="quote">ok cool. just making sure its working.</TD></TR></TABLE>
thanks for looking out for me
thanks for looking out for me
#23
Thread Starter
Join Date: Oct 2003
Location: DFW, TX
Posts: 2,806
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hatchling)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatchling »</TD></TR><TR><TD CLASS="quote">dam dude, you beat Felix's numbers
Espanol must have been jealous </TD></TR></TABLE>
nah .. i think he's cool with it. he'll be putting my numbers to shame soon enough
Espanol must have been jealous </TD></TR></TABLE>
nah .. i think he's cool with it. he'll be putting my numbers to shame soon enough
#24
Honda-Tech Member
Join Date: Mar 2002
Location: 106 and Park
Posts: 6,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hatchling)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatchling »</TD></TR><TR><TD CLASS="quote">dam dude, you beat Felix's numbers
Espanol must have been jealous </TD></TR></TABLE>
i wasn't jealous..i was proud.it's all about direp's secret cam we put in that motor.lol...
when he gets some headstuds and fixes the oil leaks were going to push that motor till it either makes real power or blows up
Espanol must have been jealous </TD></TR></TABLE>
i wasn't jealous..i was proud.it's all about direp's secret cam we put in that motor.lol...
when he gets some headstuds and fixes the oil leaks were going to push that motor till it either makes real power or blows up