I know one of the model wheels from a Miata fits the X but which one or which ones. Anyone know?

thanks

 

all of them have the right offset(or close enough) and bolt pattern...but the centers need to be bored out to fit the Honda hubs(56.2mm).

This one is 10lbs:

 

which model/year miata is that one from?

 

davens is right, you have to bore out the hub centric hole about 1.5-2mm to fit over our Honda hubs. I know the early ones up to 96 or so have the correct 4x100 bolt pattern and similar offset but I'm not sure if all the later ones do. If you can find a tiny ridge reamer for working on motorcycles or lawnmowers that goes down that small, you can use it to gradually ream out the hole till it fits. I've never done it myself but I've heard of it being done so...no guarantees, batteries not included, your mileage may vary, yadda yadda yadda

 

i have an 89 civic which i put 01 mazda miata rims on. offset is perfect, except just like the previous guyz, you have to enlarge the center a little, with a reamer or something.

 

lowlike4life has them on his rex, pm his for pix

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by davens &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>

these look pretty good for stock lightweight wheels.

 

ya i have them on my crx. i was lowlife4life but changed my username. theyre 2003 and are 16's. i painted them gunmetal and ill try to get a couple of pics up tomorrow for ya.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Renegade &raquo;</TD></TR><TR><TD CLASS="quote">which model/year miata is that one from?</TD></TR></TABLE>

Those are from '94-97...there's three differnt kinds that look the same but weigh like a pound difference. Here's a thorough breakdown: http://miata.net/faq/wheel_weights.html#weight

I would prefer Civic HX wheels, but they're hard to find while Miata wheels grow on trees. You can get a set of alloys('90-93)w/decent tires starting under $150.

 

They look somewhat like 7 spoke mini-versions of RX-7 wheels...

I'll rock em on a stock car for some decent looking wheels, fo sho.

 

i had these on my old white hatch......bbs's from a miata

 

learn something new everyday...BTW they're not too bad lookin' either

 

i jus took a pic of one of them.

they look so much better gunmetal than they did silver.

 

Those look badass damn

 

they are ususally pretty cheap too, minus tires.

 

i was lucky and got mine for 225$ w/ brand new toyo proxes.