hey all,i am selling my turbo and intercooler piping off of my car.i don't have any pics of the turbo yet.it is at my freinds turbo shop(turborepair.com) right now getting "freshened up" it will be completly rebuilt and as good as new when i get it back.it is a t3 stage three turbine wheel and comes with both a .48 and a .63 turbine housing.the compressor is a 60-1 in a polished t04e housing.it made 449whp@24psi and has been 11.44@ 128!i want to get $700 for it.normal price is $800.
the intercooler piping is silver powder coated mild steel.it starts off 2" from the turbo and goes to 2.5" to fit a apexi skyline intercooler(not included).it comes out of the intercooler in 2.5" and goes to 3" to the throttle body and has a tial BOV flange.i need to get no less than $300 for it.
this is the only pic i have.hope it is good enough

i have a new intake pipe that i just made.it is made from stainless with about 20 welds like the jdm stuff you see in the magazine.the reason it is done this way is because the inside is polished as smooth as a baby's but.i will try and take some pics later and post them up.it is 3" and has a brand new k&n filter.i would need to get $150 for it.the parts alone to make it cost $110 and i have about 20 hours in it.it should fit a car with a drag kit since the manifold was made from a drag jig.it did have slim fans however.


Modified by turbotypeR at 9:15 PM 12/11/2003

 

Hey, I seen this car in Montgomery. I was there trying to get my civic to hook up(no go) and kept blowing ic pipes off. Buy this guys stuff, it looks great. Free bump.

 

bump for a good seller.

 

thanks guys

 

nice numbers, clean bends, bumpup for good stuff

 

i need a Turbo Pipe and filter...that comes from the T3/T4e...U got this?

 

you getting out of the game Danny ?
Prices are kinda high, but bump for ya.

 

i have a new intake pipe that i just made.it is made from stainless with about 20 welds like the jdm stuff you see in the magazine.the reason it is done this way is because the inside is polished as smooth as a baby's but.i will try and take some pics later and post them up.it is 3" and has a brand new k&n filter.i would need to get $150 for it.the parts alone to make it cost $110 and i have about 20 hours in it.it should fit a car with a drag kit since the manifold was made from a drag jig.it did have slim fans however.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itr206 &raquo;</TD></TR><TR><TD CLASS="quote">you getting out of the game Danny ?
Prices are kinda high, but bump for ya. </TD></TR></TABLE>
not gettin out,just goin' deeper.
prices aren't high.have you ever priced this stuff?i charge $600 to make the piping and the powder coating cost $250.the turbo will be practically brand new and normally costs $800!

 

Nah I wouldn't say that there high.

 

I was just making a suggestion that they were a little high for used stuff. if you sell it for that
cant wait to see the new set up . i just did the same thing .

 

need to sell