anyone need parts? take a look i got tons......
MAKE AN OFFER....i know i say this every time i post something and i get a fuckload of PM's asking how much i want, I JUST WANT IT GONE WITH SOME CASH IN MY POCKET, better yet i need a bunch of parts for my next project (posted at the bottom).
my ZIP is 98037, i live in Lynnwood, WA. local pickup is always perfered. cash for pickups, PayPal for shipped items...
DOHC ZC timing cover, ok shape
throttle body from DOHC ZC dashpot thing was broken off by the importer, should work fine NO TPS
88-91 Civic/CRX coolant overflow tank
Honda OBD0 resistor box
wastegate acutator/downpipe/O2 housing/whatever from a SAAB/Garrett T3 turbo yes it has an adj. WG arm (will sell seperate, looks like there is a broken bolt in it)
throttle body from a 88-89 Prelude Si (2.0) NO TPS
WG acuator off a 60/63 T3 turbo (Turbocoupe/SVO)
Honda 240cc injectors a shitload of them
OBD1 PR4 ECU
WG acuator off a MK2/2.5L turbo Chrylser
IACV for Honda motors (fits many motors like D16A6's, A1's, and my LS motor) i have 3+
86-87 PG7 ECU
D-series starter probly only fit 88-91 (i have two, TESTED and GOOD)
CRX/Civic Si hubs/calipers/rotors (you need these for your HF/Std engine swaps. good bearings, Hawk HSP pads [used 6 months, no racing], bought rotors at the same time as pads)
another SAAB WG housing thing
a couple Honda oil pressure senders
D16A6 engine block *BARE*
Chrysler exhaust turbo housing .48ar
88-89 Integra throttle body *WITH GOOD TPS*
Ford turbo O2 housing
D16A6 crank
D16A6 head
88-89 Integra/ZC distributor *MISSING IGNITOR*
Ford turbo O2 housing w/3wire sensor
SAAB .42 compressor housing *NOTE* it should be noted that this turbo broke the turbine shaft so the housing is a little scapped up on the inside a little
CRX HF rear hatch
88-91 Civic/CRX washer tank
88-89 passenger side bumper light *AMBER* (you can probly get it to work on the other side)
Bosch/SAAB blow off valve
88-89 bumper light drivers side i think
88-89 Accord LX-i throttle body *WITH GOOD TPS* (same TPS used on all MPFI Civic's)
fuel rail off a HF motor
stock EF/CRX radiator fan (i have two, one with a plug one without)
Integra EGR valve think its the same for all Honda's 88-up
90-01 B-series flywheel
B-series knock sensor
90-93 teg/B16A intermidate shaft
WHOLE SWAY BAR/LCA SETUP FROM 89-91 Civic/CRX Si (dont need it, im getting an EG will trade for ITR sway bar
)
another sway bar minus the LCA's no end links pictured but im sure i can find some
***SAAB T3 turbo PERFECT condition!*** zero shaft play! there was no oil in compressor....was keeping it for myself but am going to buy a bigger turbo pic 1 pic 2 pic 3 pic 4 pic 5
STUFF I WANT, AND WILL TRADE FOR:
99-00 Si rims (i guess they put them on 03 civics too?)
Prelude VTEC brake calipers
stock Honda radio (prefer a CD player)
good 92-00 D-series 1.6L motor
"socketed" P28
D-series turbo manifold (internal WG)
.63 T3 exhaust housing (trade a .48 + a couple bucks?)
Aeromotive (or any) FPR 1:1 (NOT rising rate!!!)
my ZIP is 98037, i live in Lynnwood, WA. local pickup is always perfered. cash for pickups, PayPal for shipped items...
DOHC ZC timing cover, ok shape
throttle body from DOHC ZC dashpot thing was broken off by the importer, should work fine NO TPS
88-91 Civic/CRX coolant overflow tank
Honda OBD0 resistor box
wastegate acutator/downpipe/O2 housing/whatever from a SAAB/Garrett T3 turbo yes it has an adj. WG arm (will sell seperate, looks like there is a broken bolt in it)
throttle body from a 88-89 Prelude Si (2.0) NO TPS
WG acuator off a 60/63 T3 turbo (Turbocoupe/SVO)
Honda 240cc injectors a shitload of them

OBD1 PR4 ECU
WG acuator off a MK2/2.5L turbo Chrylser
IACV for Honda motors (fits many motors like D16A6's, A1's, and my LS motor) i have 3+
86-87 PG7 ECU
D-series starter probly only fit 88-91 (i have two, TESTED and GOOD)
CRX/Civic Si hubs/calipers/rotors (you need these for your HF/Std engine swaps. good bearings, Hawk HSP pads [used 6 months, no racing], bought rotors at the same time as pads)
another SAAB WG housing thing
a couple Honda oil pressure senders
D16A6 engine block *BARE*
Chrysler exhaust turbo housing .48ar
88-89 Integra throttle body *WITH GOOD TPS*
Ford turbo O2 housing
D16A6 crank
D16A6 head
88-89 Integra/ZC distributor *MISSING IGNITOR*
Ford turbo O2 housing w/3wire sensor
SAAB .42 compressor housing *NOTE* it should be noted that this turbo broke the turbine shaft so the housing is a little scapped up on the inside a little
CRX HF rear hatch
88-91 Civic/CRX washer tank
88-89 passenger side bumper light *AMBER* (you can probly get it to work on the other side)
Bosch/SAAB blow off valve
88-89 bumper light drivers side i think
88-89 Accord LX-i throttle body *WITH GOOD TPS* (same TPS used on all MPFI Civic's)
fuel rail off a HF motor
stock EF/CRX radiator fan (i have two, one with a plug one without)
Integra EGR valve think its the same for all Honda's 88-up
90-01 B-series flywheel
B-series knock sensor
90-93 teg/B16A intermidate shaft
WHOLE SWAY BAR/LCA SETUP FROM 89-91 Civic/CRX Si (dont need it, im getting an EG will trade for ITR sway bar
)another sway bar minus the LCA's no end links pictured but im sure i can find some
***SAAB T3 turbo PERFECT condition!*** zero shaft play! there was no oil in compressor....was keeping it for myself but am going to buy a bigger turbo pic 1 pic 2 pic 3 pic 4 pic 5
STUFF I WANT, AND WILL TRADE FOR:
99-00 Si rims (i guess they put them on 03 civics too?)
Prelude VTEC brake calipers
stock Honda radio (prefer a CD player)
good 92-00 D-series 1.6L motor
"socketed" P28
D-series turbo manifold (internal WG)
.63 T3 exhaust housing (trade a .48 + a couple bucks?)
Aeromotive (or any) FPR 1:1 (NOT rising rate!!!)
Thread
Thread Starter
Forum
Replies
Last Post



