Once again, I would like to thank for everyone in their effort to make this happan. Yes, I was there for just about the whole entire test.
Thanks for the following,
-Darin Dichiara (aka Willis)
- Louis Cohen from Tampa
- Mike M from IPS Racing for use of the Toda Header
- Vibrant Performance
- Enzo from Headertech
- Danny Tran from DTR Fab
- Honda-Tech member 'tegedrexÂ’ for sending out the Hytech Header
- John Yasko for use of the Weapon R Race Header
-James and the whole staff at Titan Motorsports

All dyno results found on Titans link below,

https://honda-tech.com/zero...age=1

Below are pics to used for future refernces, courtesy of me..........and your welcome, lol.

Just imagine if he didn't missed, from left to right (Toda, Vibrant, DTR, DC JDM, Comptech, Weapon R, HeaderTech)


Side View Pic


Can you say, Mint Mugen



4-1 Style Header, top to bottom (Vibrant, DC JDM, HeaderTech)


Vibrant vs DC JDM (front view)


Vibrant vs DC JDM (bottem view)


HeaderTech vs DC vs Vibrant (bottem view)


HyTech vs Comptech (front view)


Comptech vs Hytech (bottem view)


From top to bottem (side view) DTR, Comptech, HytEch


WeaponR (over shot view)


Poor Car, very nice and clean car


The Tuner, poor guy


Nice overshot pic of some of the header, nice wall paper


Toda header, very impressed for being very old off-the-shelf header


HeaderTech's Collector, very nice inside


HeaderTech exhaust port view, very nicely down


Side View of the HeaderTech (pic is sloppy, sorry)


DTR bottem view, with metric bolts, lol


DTR side view


DTR vs HyTech vs Comptech Race (back door view)


DTR vs Hytech vs Comptech Race (side-angle shot view)


Knee shot view


Out-field View


DTR vs HyTech vs Comptech Race vs WeaponR(Back-door View)


Tip-toe vew,


Enjoy!


Modified by BERT-O at 8:49 PM 12/8/2003

 

Good job man.

Maybe this time I should try hi-jacking your thread

 

Thank god I'm still at work...the good old 28,800k would have been there all night

 

s up for the pictures, to BERT-O

 

did you have any of the videos

 

Hooray for the HeaderTech header. I have the Mild Steel Coated version of the HeaderTech header. Here are some pictures if you guys wanna see the differences between the Stainless Steel version and the Mild Steel version. From what I can see, the collectors are different, not sure of other differences... Also, I wish Enzo and Red would have sent both versions of their header, not just the SS one. Oh well, enjoy the pics!

 

NICE!

 

Thanks for the pics, great job.

 

Good thing Im on 57K

 

I'm pretty much sold on that Header Tech. What a quality peice. Unless the DTR header is a similar price I think Enzo will get some buiness from me.

 

thanks for the important info

 

great pics of all the headers.

 

the header tech header looks amazing, especially the price, i bet they are going to be mighty busy after the Header Test.

 

Nice pictures Bert

 

Its very clear here to see where the foundation for each of these headers were built upon. maybe im the only who noticed

I would have liked to see this test done on a more of a high perfomance motor, to reall see the potential of the headers.

nice work Bert!

 

There needs to be a test done on a more performance oriented motor,i.e. 2.0l h/c. Then you would really be able to see the diffences between the headers. Don't forget tuning, but that would take to much time with too many variables that would make the results inconclusive.
Good job on the test though.

 

Damn nice pics. SOOO much hotness

 

You did good Bert. I'll be talking to you.

 

nice pics, maybe today i will get off my *** and get our pictures up

james

 

man insane alive batman

 

What is the Header tech price? I am now thinking of buying one, however, that looks like mild steel. Do they have a stainless steal version, and if so, how much?

 

that's f'ing sweet. thanks for all the hardwork/pics/time/effor.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TitanMotorsports.com &raquo;</TD></TR><TR><TD CLASS="quote">nice pics, maybe today i will get off my *** and get our pictures up

james</TD></TR></TABLE>

yes, please do! along with the video...

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by asmallsol &raquo;</TD></TR><TR><TD CLASS="quote">What is the Header tech price? I am now thinking of buying one, however, that looks like mild steel. Do they have a stainless steal version, and if so, how much?</TD></TR></TABLE>

That was the stainless steel version I believe. Stainless Steel = $650, Mild Steel Coated = $450 (these were the prices when I bought mine...not sure if they have changed or not). If you want, you can PM HeaderTech on here, you will get some answers if you have any questions. Also, you can give them a call at 1-877-665-5400

 

 

does anyone one know how the headertech mild coated performs against a jdm 4-1? im debating which to get