RC 550 cc injectors // Fluidyne Full Radiator
these injectors were just purchased off of tegasaurus and were never installed ... I realized these would also be too small for my needs and need to upgrade. These were never installed and were run a only a few dyno passes by tegasaurus ... come with the Flow sheet from RC...// peak and hold (resistor box needed )
sold!!!!!!1
Here is a full size Integra Fluidyne radiator I need to get rid of because I'm going to need to use a half size radiator for my setup... Its in excellent condition as you can see and will come with -
-- radiator( sells for 380 new )
--- greddy High pressure radiator cap (30 bucks new)
-- original radiator cap with fluidyne
--- Upper chrome radiator hose with chrome endcaps(70 bucks from summit)
over 480.00 worth of stuff ... all for 300.00 plus s+h/// lowered to 300 shipped to 48 states !!! paypal add 3% ----------------- SOLD ----------------
paypal / money order )paypal; paypal please add 3%
for references please check my last classified post
https://honda-tech.com/zerothread?id=608545
Modified by dasher at 4:51 PM 12/1/2003
Modified by dasher at 7:58 PM 12/8/2003
Modified by dasher at 11:19 AM 12/12/2003
Modified by dasher at 11:19 AM 12/12/2003
Modified by dasher at 1:17 PM 12/20/2003
sold!!!!!!1
Here is a full size Integra Fluidyne radiator I need to get rid of because I'm going to need to use a half size radiator for my setup... Its in excellent condition as you can see and will come with -
-- radiator( sells for 380 new )
--- greddy High pressure radiator cap (30 bucks new)
-- original radiator cap with fluidyne
--- Upper chrome radiator hose with chrome endcaps(70 bucks from summit)
over 480.00 worth of stuff ... all for 300.00 plus s+h/// lowered to 300 shipped to 48 states !!! paypal add 3% ----------------- SOLD ----------------
paypal / money order )paypal; paypal please add 3%
for references please check my last classified post
https://honda-tech.com/zerothread?id=608545
Modified by dasher at 4:51 PM 12/1/2003
Modified by dasher at 7:58 PM 12/8/2003
Modified by dasher at 11:19 AM 12/12/2003
Modified by dasher at 11:19 AM 12/12/2003
Modified by dasher at 1:17 PM 12/20/2003
Trending Topics
I don't think it will fit a 2nd gen teg without some modification ... If you are interested anyways, pm me .. if you want to modify your brackets.
I'll send the radiator for 300 shipped to anyone interested !
I'll send the radiator for 300 shipped to anyone interested !
Give me some info on the radiator. I am putting on the turbo and this sounds like a good upgrade. Is it that much better than stock? Do you keep the fan on it? Is it thinner than stock? (more clearence?)
Much better then the stock pos with plastic endtanks ... definetly recommended for turbo .. thats why i posted in this classified FI instead of Classified.
Radiator is thicker than stock(for better cooling), less clearance ... but was extremely efficient in cooling - especially coupled with the greddy radiator cap(which allows you to use more % of water in your radiator fluid/water mix and maintain the same boiling point elevation).... Because the greddy cap raised the pressure in my coolant system i was able to run 80% water 20% radiator coolant and a either some redline water wetter or 2 drops of dish soap(seriously- will do the same thing as ww for a fraction of the cost).
If your concerned about clearance than I might suggest some pusher fans ... you can usually find them cheap for 40 bucks each and they make everything alot easier.
Radiator is thicker than stock(for better cooling), less clearance ... but was extremely efficient in cooling - especially coupled with the greddy radiator cap(which allows you to use more % of water in your radiator fluid/water mix and maintain the same boiling point elevation).... Because the greddy cap raised the pressure in my coolant system i was able to run 80% water 20% radiator coolant and a either some redline water wetter or 2 drops of dish soap(seriously- will do the same thing as ww for a fraction of the cost).
If your concerned about clearance than I might suggest some pusher fans ... you can usually find them cheap for 40 bucks each and they make everything alot easier.


