These oil line restrictors are now available to be purchased. They are made of 6061 Aluminum and feature a 1/8th NPT (M) end with a 1/8th NPT (F) input, with a .060" restriction.

The cost is $18.50, mailed via USPS, or they can be sent UPS for an additional fee. Paypal payments should be sent to thawley22@comcast.net, or PM me for a mailing address for money orders. If there are anyquestions email me at tropicorange20v@yahoo.com.

Thank you,
Jonathon Thompson

This is all the info needed for people to get the restritors ordered. Please make all contact with Johathan now. Thanks for waiting and I hope that everyone is satisfied.



Modified by KamikazeSol at 4:21 PM 11/20/2003

 

Any idea as to what PSI they bring your oil pressure down to? I think that would be really helpful just to know what they bring yer 80 psi at WOT down to so yer turbo doesn't die.

 

I don't know the exact pressure, but they have been used by many people on Nissan applications with no problems. Many kits that come from Japan have the same size restrictors built into the feed port. I do not think you need to worry about not having enough oil.

 

I'll pick mine up as soon as I get paid.

 

These should bring your max oil pressure down to about 50psi.

 

Bumpy bump bump SO I can find this on Friday... pay day...

 

any pics? I missed the old threads...

 

Go to this link for pics.
http://www.sr20forum.com/showt...35577

 

how will i know if this will work with my greddy oil feed line

 

Check to see if your feed hole is 1/8NPT.

 

damn, $18.50 there, $20 here.... which is it?

 

Price is 18.50, not 20.00, please note that everyone.

 

I send you an email, I need to know where I can send the money order to. Thanks,
vic

 

Payment sent... Gimme Gimme Gimme.

 

can these go strtaight on teh turbo? or should it be before on the Tee?

 

These are threaded to simply be a plug and play oparation on the turbo, and then screw what would normally go into the turbo into this fitting. Simple, easy, clean.

Me likes.

 

BUMP for a great product. I got mine in and will be installing over the weekend.

 

might be interested... ill let u know

 

im not familiar with the sizes, anyone know if this works with Stan's oil line kit for a Precision?

 

Should work fine

 

Im very interested, someone should hook a guage up after it too see. Ive seen so mean seals go bad for no reason among my friends. I read on some companys site along time ago that the minum pressure a garret turbo needed at any time was only 10psi.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by omahaturbocivic &raquo;</TD></TR><TR><TD CLASS="quote">Im very interested, someone should hook a guage up after it too see. Ive seen so mean seals go bad for no reason among my friends. I read on some companys site along time ago that the minum pressure a garret turbo needed at any time was only 10psi.</TD></TR></TABLE>

Just for comparison a Nissan 2.0 goes from about 85 max psi down to about 50psi max.

 

Bump for a great product. Please buy if you posted that you wanted the part. These were made just for us.

 

Got mine in the mail today... looks really good. I'll install it tomorrow... Little teflon tape on the threads, and voila, should be AOK.

 

Bump for the long holiday weekend.