Note: Being that it's much easier for me to sell the block/crank than anything else, i'll first offer it to whoever is interested in making me a fair offer for the pistons, since it is already bored/honed for them, helping me sell more, and saving the buyer time and $. edit: i'll take $800 for the pistons and the block, or if i get $400 for the pistons first, i'll sell the block after for about the same.

B18C Crankshaft- $175




NEW Endyn RW pistons/Rings/Pins/Clips: 81.5mm bore, High Compression. for Compression Ratio (dependent on stroke, deck height, combustion chamber volume, etc.) please check here: http://www.theoldone.com/components/pistons/ -sold

New B18C Eagle Rods. -sold

Complete/Assembled 96 JDM B18C Cyl Head- <30K excellent condition. never run in America. includes intake manifold, tb, fuel injectors, fuel rail, cams, valves, springs, LMAs, keepers, retainers, caps, rails, bolts, valvecover, distributor, sensors, vtec solenoid, cam gears, etc. $800 + shipping obo.

New Comptech Race Header- sold

New Crower B18C Rods- $525





Modified by slofu at 9:18 AM 12/15/2003

 

where you located and how much you sell the assembled block and head for

 

the block is not yet assembled, but i want $800 for the pistons and block, since it was bored/honed for them, which cost >$200, and the pistons, Eagle rods, and crank have been balanced. the head is complete, so i'd like $800 for that, too. the crank i'll sell fo $175, but i'd like to sell as much as possible together, and i'll try to shave a few $s off here and there depending on how much people want to buy together, and i'll also save them $ on shipping. i'm in metro Detroit, MI.

 

BUMP!

 

thanks.

 

bump for detroit!

 

PM'd you about the comptech.

 

reply PM sent. and thanks for the west coast to Motown bump.

 

Hey, would you be able to ship anywhere....How much for the Block, pistons rods and crank?

flowresistance@hotmail.com
thanks
nik

 

PM reply sent. Post Edited. some Prices Lowered.

 

pm sent

 

if your interested in parting it at all i'd be interested in the outer valve springs...

if not... bump 4 u!

 

i have a set of outer valvesprings for you. i PMd you, but for some reason the PM isn't working for me, so email me with an offer or for further details: zkwrl@yahoo.com

 

do you still have the pistons (combo) and the rods avialble?

 

pm me the price for the price of the header picked up.

Do you have reciptes? (Sp?) Do you have any picks of the header?

 

the B18C block, crank, and Crower rods are still fs. pm or email me if interested. thanks.

 

are you willing to just sell the block? if so how much?

 

yes. check PM.

 

how much for the block??