Setup:
B18B
JE Pistons/ Eagle Rods
Cometic Headgasket 9:1 comp
35mm Tial
T3/TO4E 60 trim/ 63 exhaust
Lovefab exhaust manifold
720cc injectors
hondata s200
3in exhaust cutout

This run was made at 1bar of boost. There was a b18c1 right next to me in the shop with a cracked sleeve that was running the same boost level, so I was discouraged to take it any higher.

Lots of thanks to Cody for making the manifold for me. Customer service is great, and the manifold obviously performed very well. Minh @ Modified Performance in Wichita, did a heck of a job with the tuning. As you can see, we were still somewhat conservative with the a/f's because this car is driven everyday.

 

Gotta love the close torque to horsepower ratio Nice numbers

 

yummy

 

Is that 315whp and 299 ft lbs trq?

 

Good perfroming manifold I love the torque!


Rob

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Outkast &raquo;</TD></TR><TR><TD CLASS="quote">
Is that 315whp and 299 ft lbs trq?</TD></TR></TABLE>

yes it is

 

is your full boost at 5200?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by InTeGrA B18b1 &raquo;</TD></TR><TR><TD CLASS="quote">yes it is</TD></TR></TABLE>

VERY.........Very nice........

I need to get my eyes checked........

 

great numbers man... b18b owns again!

 

Awesome graph your making real good power a fair way from redline there.

 

*edit* NVM I'm an idiot Nice #s!


Modified by raene at 1:00 PM 10/1/2003

 

lol

 

The horsepower is nice, but look at that torque

Nice job

 

what bore are those je's?

 

I think its a stock block, besides the internals...

 

I thought b18b rev up to 7,500rpm ?

 

I think they only go to 6850?

 

tinker is the man..
b18b owns.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tinker219 &raquo;</TD></TR><TR><TD CLASS="quote">I think they only go to 6850? </TD></TR></TABLE>

yes, stock fuel cut is 7200, redline is 6800.

Those are some AMAZING numbers, sir! I'm going to have, respectivly, an identicle setup. Just a couple questions though; what clutch are you using and at what duty cycle were your injectors on that run (or do you know?)?

ryan

 

nice.

sam

 

which lovefab manifold are you using?

 

im pretty sure an SST

 

Hey, I love your torque numbers but I do have a couple of qustions.

What car is this in?
Is your 1/4 time with the hp you made?

Again nice numbers!
Adi

 

nice numbers.......the torque number is wicked

 

Is that the time you ran with that setup(the 1 in your sig)?

Good numbers