Help i just bought a jdm itr center console (the one around the shifter with the carbon fiber incert)
not realizing that it wouldnt fit. iv seen it done before and frankly im at the end of my rope here and extremely pissed. please help asap

 

bump

 

What sort of help are you asking? Might be easier to help if you can clarify what you are needing.

 

He's trying to Fit the RHD Center Console for the JDM ITR in a LHD USDM Integra.

Not exactly what you need to get it to work without looking like crap, but Good Luck.

 

exactly.
I know ive seen it done but how??

 

bump common guys

 

USDM Integra Type R

 

????

 

where have u seen this work at? id go back to aht point then, but i dont see it working

 

not going to work unless u fabricate the brackets. I found this out while trying to slide in a jdm itr ashtray/cig lighter assembly and I will need to do this for my jdm itr a/c vent. (cut off brackets and switch them to opposite side)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EDoTdc2 &raquo;</TD></TR><TR><TD CLASS="quote">Help i just bought a jdm itr center console (the one around the shifter with the carbon fiber incert)
not realizing that it wouldnt fit. iv seen it done before and frankly im at the end of my rope here and extremely pissed. please help asap </TD></TR></TABLE>


Why make a JDM (RHD) part fit, when the same USDM (LHD) fits perfect and probably cheaper than what you paid for the JDM part.

 

I'm guessing he bought it without knowing and wants to see if he can get it to fit before buying a USDM one.

My answer is your SOL buddy.

 

sell it on ebay and get a usdm center console.

 

not sure does th usdm type r come with the carbon fiber trim also. i thought only the jdm did??

 

oooh...so you were buying it for the carbon fiber trim. makes it mad fast yO!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EDoTdc2 &raquo;</TD></TR><TR><TD CLASS="quote">not sure does th usdm type r come with the carbon fiber trim also. i thought only the jdm did??</TD></TR></TABLE>

00+ do, but save your money. It isn't real CF, nor is it even a particularly authentic looking fake.

 

i have it done on my car what i had to do was i stuck the airconditioner unit in there with double sided take then sealed it around the edges eith clear sealer, and i modified the ashtray and cigarett unit a little and held it in with a zip tye. I know it sounds ghetto but it works and you cant tell

 

I know it looks fake as hell but i have a tan interior which im changing to black and i was lookin for somethin to accent it what else would you sugges...Painting my vents silver and writing bling bling on the head liner??
im looken for a clean oem interior

 

To use the JDM console you need a RHD dashboard.

However that plate around the shifter should be able to come off and you should be able to swap out the plate on your USDM console for the JDM faux CF plate.

 

mine looks completely stock just like a jdm integra no one would know unless i told them. and i like how the dash lights are orange instead of green and i have the jdm gauge pod to to match the dash lights