i cleaned out my garage this weekend and i have a bunch of stuff for sale. make me offers on anything

-seats. not sure what car they are from. they have 88-91 Civic/CRX rails/sliders on them. perfect condition. no holes. no rips. no tears. no wear. $300 FIRM

-94+ GSR exhaust manifold (upper part only) have heatshield also - $15

-90-93 Integra intake arm - $5

-4040 prop valves - $40 shipped

-90-93 Integra master cylinders - $35 shipped

-B16 charcoal canister - make offer
-Civic 4sp shift **** - free

-stock jack from 91 civic hatch - $10

-Brospeed 4"? exhaust tip - free

-88-91 booster and MC - $10

-B16 power steering pump - $20

-LS valve cover - $75 and will have powdercoated any color you want

-DC upper part of header. dont know what car its for. wont fit on D or B series. number on top of header is D3703 - $25

-94+ GSR MC and booster - $60

-B-series A/C bracket - $15

-OBD0 PM9 ECU - $15 SOLD to boomslang
-OBD1 P05 ECU - $30 SOLD to Ag-Eng

-LS cams w/ cam gears. intake and exhaust - $50

-88-91 Civic/CRX gauge cluster trim cover piece. just dusty in pic - $10

-88-91 stock taillights. drivers side is cracked on side - $25

-88-91 stock headlights - $50

-88-91 Civic SI center console (covers shifter and e-brake handle) - $20

-OBD1 injectors from a 93 Civic CX - $20

-2 88-91 DX gauge clusters - $15 each
-84-87? CRX gauge cluster. has tach - $15

-88-91 set of front springs and struts complete with hats assembled - $30

-88-91 radiator - $20

-90-91 drivers side fender. red. faded - $30

-misc parts from 98 Accord - water pump, oil pump, VTEC solenoid, intake manifold, pulleys, thermostat, throttle body, knock sensor, 3 pistons, 4 rods - make offer

i have a couple references on this board and a few other boards. i accept paypal or money order. everything is plus shipping. i'm not really sure what the going rate is for some of the stuff so if its too much just make an offer. i'll accept trades for B-series header, fuel cell, 15" rims, EF exhaust, and maybe some other stuff. let me know what you have. anything except the seats are best offer. i really like the seats and will only get rid of them if someones willing to pay $300 for them

bigger pics can be seen at http://www.cardomain.com/membe...age=2

i am located right around Harrisburg, PA so if you wanna meet me somewhere around there thats fine too


Modified by 98AccordEX at 10:37 PM 9/22/2003

 

up. make some offers. i just need to clean out my garage so i'll pretty much take anything. you can lowball to a point

 

up - will trade for pretty much anything for a B-series motor in an EF except an intake. could use clutch, flywheel, header, fuel rail, FPR, whatever

 

come on. someone needs something here. make an offer if my prices suck

 

up

 

I had those same exact seats in my 88 CRX DX that you are selling. Just thought you wanted to know as far as which car they came out of.

 

freeeee bump for some very dusty parts.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EVIL_Vap133 &raquo;</TD></TR><TR><TD CLASS="quote">I had those same exact seats in my 88 CRX DX that you are selling. Just thought you wanted to know as far as which car they came out of. </TD></TR></TABLE>

really? are they stock CRX DX seats? they may be the most comfortable seats i've sat in. i like them better than my friends Recaro SRDs honestly. i have tenzo race seats in my hatch and they may get taken out for these seats

and the parts are only dusty because i just put insulation and drywall up in my garage and left out some of the stuff that could get a little dusty. they will be cleaned before theyre sent out

 

up cause the Red Sox gained another game in the wild card tonight

 

up - both ECUs sold

 

interested in a prop valve....ship to Chicago-area, 60452...?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98AccordEX &raquo;</TD></TR><TR><TD CLASS="quote">

really? are they stock CRX DX seats? they may be the most comfortable seats i've sat in. i like them better than my friends Recaro SRDs honestly. i have tenzo race seats in my hatch and they may get taken out for these seats

and the parts are only dusty because i just put insulation and drywall up in my garage and left out some of the stuff that could get a little dusty. they will be cleaned before theyre sent out</TD></TR></TABLE>

Yeah, I bought my CRX off of this lady and she was the original owner. Those seats were in I believe all dx CRX's.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EVIL_Vap133 &raquo;</TD></TR><TR><TD CLASS="quote">

Yeah, I bought my CRX off of this lady and she was the original owner. Those seats were in I believe all dx CRX's. </TD></TR></TABLE>

wow. theyre pretty nice seats for being in a DX. what did the SI have?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98AccordEX &raquo;</TD></TR><TR><TD CLASS="quote">

wow. theyre pretty nice seats for being in a DX. what did the SI have?</TD></TR></TABLE>

Same shape seats but with a different cloth pattern and a hole in the headrest.

 

how much for the dog

 

up for the weekend

 

up because i am tripping over this stuff in my garage when i'm finishing up my swap

 

up - some prices reduced

 

what is the driver fender from? a teg or what
if its a 91 teg i will take it

also do u have any LS heads? in good condition

i live about 20 min from harrisburg

 

its for a Civic. and no i dont have an LS head. just the cams and valve cover

 

up - GO RED SOX

 

Go Cubbies!! lol, hopefully either the Cubs or the Red Sox will get out of their slump...

Whats the deal with that 4 spd tranny? The only 4spd manual came from the STD. The DX had a 5spd.

Are the DA (90-93 Teg) MCs the same size as the EF? Because I have DA brakes on the front, and pretty sure the back too, and when cruising in parking lots, I have to pump the brakes to stop... I don't have any money right now, just looking around. I'll hit you up when I get some cash. So yeah, some free info, and a free bump.

 

then i guess my car is an STD. i got it from a guy and the motor didnt run at all. and the shift **** only had the 4sp thing. everything is goin to the scrapyard tomorrow unless someone speaks up tonight

the DA MC is a 15/16". i believe the EF was a 13/16" or 7/8" i forget which

 

up

 

ummmm. why are my pics not showing up?