ONE MONTH SPECIAL!!! 10/10/03
Hey Guys and Girls...
Here it is again..my chipped p28 ecu for sale thread. I just recieved a new shipment of p28 ecu's. All the ECU's have been socketed which enables you to swap out the chip and plug in a new program in under a minute. My ecu can also be used for hondata if you plan to go that route in the future. This ecu will plug directly into 92-95 civics and integra's, and will plug into any obd2-1 conversion harness. I have the following programs for the DOHC VTEC set ups (b18c1, b18c5, b16a, LSVTEC, B20vtec, etc.)

Skunk2: vtec-4800 rev limit-9000
Mugen: 5700, 9000
JUN: 4400, 9100
Feels: 5700, 9600
Visions: 5200, 9600
RPT: 4800, 9500
iH8RICERZ Custom All Motor program: 5300, 9200
iH8RICERZ Mild All Motor program: 5700, 8200
Stock ITR program (not exact program, but close): 5700, 8400

custom vtec as well as rev limit can be set upon request and an additional $5. Each additional chip/program bought along with the ecu will be $10. If you want the chip alone w/o the ecu, then its $20 for the first and $10 for each additional program. I can supply obd2-1 conversion harness; versions A & B, or you can get them directly from blown90hatch. Please check my reference thread in my signature. Dyno chart has been posted, as well as satisfied customers. ANY QUESTIONS? Feel free to ask

THIS MONTH ONLY PRICE: $185 SHIPPED for an obd 1 chipped p28 ecu w/ your choice of program!

thanks
Jay


Modified by iH8RICERZ at 7:10 PM 10/10/2003

 

bump for an awesome seller!!!!

 

bumpity bump bump

 

take a trade? I have a chipped p72. i have a skunk 2 IM on my gsr, no need for secondaries anymore. and im looking for a more aggressive chipped ecu to fit my application. My P72 is chipped from a while back, and there has been a lot of mods done to my motor now, and your setup would be very nice. let me know if ur interested.

 

Bump for a good friend.

 

Bump for J BUY HIS ECUS.

 

I am interestd in a p28 ecu for my b18c1. would you take a trade? I no longer need to control any secondary butterys. so maybe someone out there needs this ecu to control the secondaires, because i don't. let me know if your willing to trade or not.

 

i was going to order one but realized that it wont be in my best intrest right now to get it since i still got the stock GSR manifold so will have to wait till i get a skunk2 IM so i wont have to wurry about the secondaries.

 

OOH, Happy Sunday.......

 

What a stock factory set obd1 ecu cost for a b18c1(GSR)? I will eventually be running a hondata as well

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DroppedGSR &raquo;</TD></TR><TR><TD CLASS="quote">What a stock factory set obd1 ecu cost for a b18c1(GSR)? I will eventually be running a hondata as well</TD></TR></TABLE>

I sent you a PM, but you never replied...... anyways, UP WE GO!!!

 

UP we GO!!!! i and H-T

 

Posted below is my dyno graph from my 1994 GSR with the following upgrades:
aem short ram intake
ctr intake cam
skunk2 cam gears
skunk2 Intake Manifold
dc 4-2-1 ss header
test pipe
greddy sp cat back
GRAPH SHOWS COMPARISON OF THE STOCK ECU (red line) VS. MY CUSTOM ALL MOTOR PROGRAM (blue line). (note: timing was advanced, cam gears +1 int, -2 exh. vafc needed for tuning next time.


MORE DYNO GRAPHS OF DIFFERENT PROGRAMS ON A JDM ITR WILL BE POSTED SOON!

 

HRMM...new price and no PM's yet?

 

got 5 left from this shipment!!!

 

free bump wish i had some cash

 

do u still have some left

 

yes...3 left in this shipment..more to come...i hope