I just completed a B18C swap into my 92 CX and I have a hose on the back side of the intake manifold right beside the throttle body that is not hooked up to anything.

I dont have a camera to post a pic so I searched for a pic of it to see if I could solve it that way but no luck.

If someone could please post a pick of the back side of a GSR intake manifold it would be very helpful.

 

Large hose or small?

Small could be the Cruise control vaccum line.

Large would be the brake booster

 

The hose is very small and thin. More like a vacuum hose than a heater hose.

I dont think the length of the hose will mean anything to you because most of the hoses were cut when I recieved the engine!

Someone post a pic please!

 

ttt

 

i've got min blocked off... the only vac line I have going from the mani is the one to the FPR

 

I found a pic of what I am talking about! I need to know there the hose that connects to this nipple goes!



A little help please!

 

for anyone else that couldnt see the pic come up

 

I think it may be the coolant line from the IACV. Can't REALLY see it that good.

 

Looks like it connects to the fast idle control valve.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gunns &raquo;</TD></TR><TR><TD CLASS="quote">I found a pic of what I am talking about! I need to know there the hose that connects to this nipple goes!



A little help please!</TD></TR></TABLE>

That is the evaporative emission [EVAP]purge control diaphragm valve. You should have a hose leading from that to the evaporative emission [EVAP] control canister...

 

evaporative emission [EVAP] control canister...
_______
Pic please!

 

I found this pic!
I have the sensor that number 8 is pointing to. I just need to know where the harness comes from that plugs into it?

I someone could still post a pic of their GSR Intake Manifold from the back side It would be very helpful!

Thanks in advance guys!

 

ttt