Here are my progress picts of my ride. I started work last winter and recently put everything back on and started driving it around a little. Enjoy. All comments welcomed.

 

what did you do underneath and inside the wheel well?
weather proofing?

 

Almost forgot an engine pict....this is a bad pict but best one I have.



- Will

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sucka Free &raquo;</TD></TR><TR><TD CLASS="quote">what did you do underneath and inside the wheel well?
weather proofing?</TD></TR></TABLE>

Just washed it with soap and water for 2 days in a row. Then went back and scrubbed Armor All on them. Took a long time but looks great.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Evilwayz24 &raquo;</TD></TR><TR><TD CLASS="quote"> Took a long time but looks great.</TD></TR></TABLE>

F'K yah it does! ...... i dont think new cars are that clean.

 

looks good...what are your plans for it?

 

Damn
Some seriously clean under car cleaning

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POS Hatchback &raquo;</TD></TR><TR><TD CLASS="quote">Damn
Some seriously clean under car cleaning </TD></TR></TABLE>


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
wut was he doing here?

 

Yeah?

 

If you look in the pict above you see that the inside of the rim looks really bad. And in the middle looks kinda like rust. So my dad had this idea of putting rust remover into the rim so it can soften of the junk inside the rim. It was a great idea, made cleaning inside the rim a lot easier.

And my future plans are unclear at this moment. You guys have any ideas? I want to get an Intake Manifold, Cams, etc. But lots of people were telling me to get rid of the DC Sport 4-1 Header and GReddy Evo Exhaust and go with something with Mugen or Spoon. Should I? Is it that much of a difference?

- Will

 

Looks good bro, and yes comparing Spoon or Mugen to Greddy is quite a difference... you will tell the most with the cost of parts as well as the quality.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Evilwayz24 &raquo;</TD></TR><TR><TD CLASS="quote">If you look in the pict above you see that the inside of the rim looks really bad. And in the middle looks kinda like rust. So my dad had this idea of putting rust remover into the rim so it can soften of the junk inside the rim. It was a great idea, made cleaning inside the rim a lot easier.

And my future plans are unclear at this moment. You guys have any ideas? I want to get an Intake Manifold, Cams, etc. But lots of people were telling me to get rid of the DC Sport 4-1 Header and GReddy Evo Exhaust and go with something with Mugen or Spoon. Should I? Is it that much of a difference?

- Will</TD></TR></TABLE>

Screw a Mugen or Spoon header. Get something like HeaderTech, HyTech, SMSP, etc...for the price of the Spoon or Mugen parts, you can get a header that out performs them. All that cleaning and stuff is takes too much patience for me, I am really lazy. The outcome looks pretty nice though

 

damn now thats really clean, too bad i dont have the patience to do that or the time. well actually im just lazy

 

Your Si is clean inside and out! That must've taken a lot of time but it looks good. Nice Integra too.

 

Hope it doesn't rain.

 

clean and shiny

 

with a garage like that, i wouldnt mind spending some time cleaning my car.

 

i dig it.

 

 

Thanks for the comments everyone.

Questions: Do you guys think I should take my blue license plate covers off? And, would it be a good idea to get rid of my mods right now to go on to more quality mods or keep em?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Evilwayz24 &raquo;</TD></TR><TR><TD CLASS="quote">And, would it be a good idea to get rid of my mods right now to go on to more quality mods or keep em?</TD></TR></TABLE>

What's your budget? I have lots of ideas, but not sure what kind of money you have to play with.

 

i like your tool box and garage, hmm the possibilities

 

you my friend are what I call a "perfectionist"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Unsung EM1 &raquo;</TD></TR><TR><TD CLASS="quote">

What's your budget? I have lots of ideas, but not sure what kind of money you have to play with.</TD></TR></TABLE>

Don't really have a budget. I'm just taking my time with everything but I really have no budget. The reason I have the mods that I have now is because everyone was telling me that "a header is a header" so I never did any research on them, just the big products like cams, etc. Now I see that everyone is very pleased with there Mugen headers and I was thinking of maybe changing some of my mods for better performing ones.

- Will

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ScaleExtric &raquo;</TD></TR><TR><TD CLASS="quote">you my friend are what I call a "perfectionist" </TD></TR></TABLE>

True, and nice Si. ;}