can help me??. i need to find out. what TB is this... came with a y8 manifold i bought.. all the time i thought it was a y8 TB till i went to Honda and got the gasket. it doesn't line up.... the measurements were done from the inside of the grove...i need to find out to get the right gasket for it...tia

 

well its not a type r but it could be a b18c a b16 or a h22

 

looks like gsr

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TURSpoonEK &raquo;</TD></TR><TR><TD CLASS="quote">looks like gsr</TD></TR></TABLE>

 

the pulley its not like a gsr..

 

are there any stamps or markings on the casing that could help us distinguish which tb it is? are you sure a y8 manifold doesn't have the same size tb as a few others? just a thought...

 

LS maybe??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JCracer723 &raquo;</TD></TR><TR><TD CLASS="quote">the pulley its not like a gsr.. </TD></TR></TABLE>

It's is easy to change those pullies, I have done it to a GS-R throttle body personally...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16b2b &raquo;</TD></TR><TR><TD CLASS="quote">are there any stamps or markings on the casing that could help us distinguish which tb it is? are you sure a y8 manifold doesn't have the same size tb as a few others? just a thought...</TD></TR></TABLE>

here are the marks/stamps that i was able to find :

 

I guess this doesn't help but it's the same as one I got which I was told was off a B16a2.
It can't be though since the FITV is usually on the IM, not the TB. H22a perhaps? I'd like to know too

 

b16a2

 

I thought the FITV was on the intake manifold of a B16a2? like on my B16A

 

Who gives a **** where it came from? Trim the gasket to fit with some scissors and put it on your intake manifold. Nearly all the Honda TB's are interchangable: it's a lot easier and cheaper to cut the gasket you have than buy a new one. You're not losing anything by doing so.

 

well since i thought it was a y8 TB. i went ahead and order the gasket. i got it. the only thing that lines up its the holes for the bolts. other than that its too short. thats where i realize it wasn't a y8 TB...i order the 92-95 gasket. which i was told by the Honda dealer stupid guy, that all si,ex,lx,dx,cx,vx where the same...we will see how that goes. the civic gasket was only about 2 bux. while a damn LS gasket from acura its 9 bux.

 

i thought just the older cars had that big thing on the bottom of the throttle body. i know GS-Rs and Sis dont have that. from the looks of it, i think thats an old LS throttle body.

and whats y8? everythings gotta be reffered to by some kinda code these days.

 

I am thinking GSR
*** fara as i know the h22a throttle body is 62 mm bore, down to 60mm...
and tb on my gf's gsr looks damn near the same.

 

any1 else?

 

its from obd0 for sure no map sensor on top i say 90-91 integra

 

well the TB on the pics didn't have any sensors at all. but it does have the holes for it. and now its all assembled with both sensors

 

someone mentioned the "big thingy" thats a fast idle thermo valve.

and its probably from an ls... look on the one of the dseries boards, that was talked about for like 2 months straight.

 

looks like a h22 tb

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rathead &raquo;</TD></TR><TR><TD CLASS="quote">looks like a h22 tb</TD></TR></TABLE>

u are right !!!

https://honda-tech.com/zerothread?id=573532