PS Removal Kit Ready
#1
Darth ModerVader
Thread Starter
Power Steering Removal Kits Ready
Complete power steering removal kits, which allow the stock PS system to be removed and replaced with a looped breather/reservoir setup. Each kit includes all necessary components -- no additional parts are needed.
Please note: these kits are designed to work on cars that have the PS system currently installed (not "bare" racks), and because of this, they reuse certain parts from the factory system. On the '94+ Integra and '96-'00 Civic, the only part reused is the one "nipple" fitting on the rack, but on the 5th gen. Civic, two of the original PS lines are reused, so these parts would be needed for installation if all the owner has is a "bare rack".
Those who wish to order a kit, please PM or email (preferably PM) me your H-T screenname, full name, address, number and type of kit desired, and some form of contact information (e.g. email address or phone number).
Applications:
- Integra '94+
- Civic '92-'95 (pictured)
- Civic '96-'00
- Del Sol
Pricing for the kits is $75.00, which includes USPS Priority 2-3 day shipping within the US.
Payment can be by Paypal, certified/bank check, or money order.
As always, please contact me with any questions or concerns. Thanks everyone.
Please note: these kits are designed to work on cars that have the PS system currently installed (not "bare" racks), and because of this, they reuse certain parts from the factory system. On the '94+ Integra and '96-'00 Civic, the only part reused is the one "nipple" fitting on the rack, but on the 5th gen. Civic, two of the original PS lines are reused, so these parts would be needed for installation if all the owner has is a "bare rack".
Those who wish to order a kit, please PM or email (preferably PM) me your H-T screenname, full name, address, number and type of kit desired, and some form of contact information (e.g. email address or phone number).
Applications:
- Integra '94+
- Civic '92-'95 (pictured)
- Civic '96-'00
- Del Sol
Pricing for the kits is $75.00, which includes USPS Priority 2-3 day shipping within the US.
Payment can be by Paypal, certified/bank check, or money order.
As always, please contact me with any questions or concerns. Thanks everyone.
#3
Guest
Posts: n/a
Re: PS Removal Kit Ready (Padawan)
Hey if any of you are going to do this on an integra. I have a Milled and Balanced Crankshaft pulley for an integra motor with only the AC and alternator pulley left on the crank. this would complete your PS removal and help free up more power.
Sorry Padawan if this bugs ya I'll delete it. I just thought this would be a great spot to help move your stuff as well as my pulley I had made. ($25 for the pulley and you pay shipping).
It is a stock integra pulley, milled and balanced. No PS pulley on it. In mint shape.
Sorry Padawan if this bugs ya I'll delete it. I just thought this would be a great spot to help move your stuff as well as my pulley I had made. ($25 for the pulley and you pay shipping).
It is a stock integra pulley, milled and balanced. No PS pulley on it. In mint shape.
#4
Darth ModerVader
Thread Starter
Re: PS Removal Kit Ready (xrtdac)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xrtdac »</TD></TR><TR><TD CLASS="quote">Sorry Padawan if this bugs ya I'll delete it.</TD></TR></TABLE>
Not at all - good luck with your pulley.
Not at all - good luck with your pulley.
#8
Darth ModerVader
Thread Starter
Re: PS Removal Kit Ready (Padawan)
Just as an update, I'm requesting that everyone who was interested in the first batch of kits please send payment by Friday (July 18) so that I can get the kits shipped ASAP. Please PM me if/when you are sending payment.
There will most likely (depending on interest) be a second, later batch of kits as well. Thanks in advance.
-Chris
There will most likely (depending on interest) be a second, later batch of kits as well. Thanks in advance.
-Chris
#9
Guest
Posts: n/a
thats the pulley I made.also I just set it upright on a flat table on the tallest pulley channel(lower right pic, that side) and it stood there straight up and down with the pertruding hone outward (upper right corner pic, that side) plus the other shorter pulley channel. i can take a pic if you would like to see it.
Modified by xrtdac at 7:49 PM 7/16/2003
Modified by xrtdac at 7:50 PM 7/16/2003
#11
Darth ModerVader
Thread Starter
Re: (Grocery Getter)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Grocery Getter »</TD></TR><TR><TD CLASS="quote">no on my 92-95 civic i have 3 fitting/hoses that come out......
how would this work for me?</TD></TR></TABLE>
I am now offering a 5th gen. kit that works with the 3 fitting racks.
Modified by Padawan at 3:37 PM 10/22/2003
how would this work for me?</TD></TR></TABLE>
I am now offering a 5th gen. kit that works with the 3 fitting racks.
Modified by Padawan at 3:37 PM 10/22/2003
#13
Darth ModerVader
Thread Starter
Re: (circuitgsR)
This kit provides all necessary parts to allow the rack to be "looped" with a breather/reservoir. Please see the links in my initial post for more extensive information.
#15
Honda-Tech Member
Join Date: Nov 2001
Location: San Jose, CA, USA
Posts: 3,492
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Grocery Getter)
I have a 97 EX, and it looks like my high pressure lines come out of the back of the steering rack. It doesn't look like there's much room to maneuver. Can I still use this kit?
#18
Re: (Threatcon13)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Threatcon13 »</TD></TR><TR><TD CLASS="quote">bump, ive already placed my order. for an excellent product </TD></TR></TABLE>
me too...free bump
me too...free bump
#20
Darth ModerVader
Thread Starter
Re: (midnightdarknes5)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by midnightdarknes5 »</TD></TR><TR><TD CLASS="quote">I got a 93civic si can I use this kit as well?</TD></TR></TABLE>
A 5th gen. Civic kit is now available.
Modified by Padawan at 12:43 PM 5/26/2004
A 5th gen. Civic kit is now available.
Modified by Padawan at 12:43 PM 5/26/2004
#22
Honda-Tech Member
Join Date: May 2002
Location: grand rapids, mi, usa
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EVOL)
Someone who removes all their PS crap... PM me.. I want to buy it.
I need the pump, d-series bracket, lines, cooler, resivoir. All that stuff....
Anyway... back to the original discussion
free bump!
I need the pump, d-series bracket, lines, cooler, resivoir. All that stuff....
Anyway... back to the original discussion
free bump!
#25
Darth ModerVader
Thread Starter
Re: (sil2civic)
There will be a second batch of kits available soon. I'll start taking orders on Monday the 4th, and like the last batch, there will be a cutoff date for sending payments so that I can get the kits out as quickly as possible.
Modified by Padawan at 11:06 PM 7/18/2004
Modified by Padawan at 11:06 PM 7/18/2004