I'm currently running NSX calipers on stock R rotors. I got my Legend rotors today from a GS coupe and tried installing the rotor but ran into a problem. The huge Legend rotor rubs on the caliper bracket. Looks like the stock R bracket is a very tight fit for the Legend rotor. Do I have to change the caliper bracket to the Legend one? Please help.

 

I believe a spacer for the caliper bracket is needed.

Edit:

Quoting Migs from this thread: https://honda-tech.com/zerothread?id=239844
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">2) Using NSX calipers + GS rotors requires you to "shim" the caliper bracket out a littie bit. This can be accomplished by using washers. I had only used 1 washer per bolt.</TD></TR></TABLE>


Modified by Dr Pooface at 6:27 AM 7/9/2003

 

you must run a washer on each bolt of the bracket. if your still confused, ill jack up the car and take a pic for you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20bastard &raquo;</TD></TR><TR><TD CLASS="quote">you must run a washer on each bolt of the bracket. if your still confused, ill jack up the car and take a pic for you</TD></TR></TABLE>

I'd like to see the pics if you get around to it. Thanks.