'94 Accord lip pics
Thread Starter
Honda-Tech Member
Joined: Feb 2001
Posts: 4,830
Likes: 3
From: blah blah blah
'94 Accord lip pics
Here are some pics of a '94 Accord lip I installed on my wagon.
It went on pretty easily. I just used self tapping screws on the under side.
The lip was a little too long so I had to cut about 2 inches off each end.
Here are a few pics:
The fit is not totally perfect, but its pretty darn close.
Here is a close up pic. You can see that the curve of the bumber and the lip is not exactly the same.
I think you can get the lip new from honda for around $30.
Overall I'm pretty happy with it.
It went on pretty easily. I just used self tapping screws on the under side.
The lip was a little too long so I had to cut about 2 inches off each end.
Here are a few pics:
The fit is not totally perfect, but its pretty darn close.
Here is a close up pic. You can see that the curve of the bumber and the lip is not exactly the same.
I think you can get the lip new from honda for around $30.
Overall I'm pretty happy with it.
ef wagons i pretty sure it'll be next my list unless i come across really cheap 88 4dr
Thread Starter
Honda-Tech Member
Joined: Feb 2001
Posts: 4,830
Likes: 3
From: blah blah blah
Re: '94 Accord lip pics (VTgringo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTgringo »</TD></TR><TR><TD CLASS="quote">looks good......what type of drop, if any, do you have?</TD></TR></TABLE>
Right now I have crappy no-name coilover sleeves. But my Teins arrive tomorrow!
Thanks for the comments, guys.
Right now I have crappy no-name coilover sleeves. But my Teins arrive tomorrow!
Thanks for the comments, guys.
Trending Topics
Honda-Tech Member
Joined: Jun 2003
Posts: 142
Likes: 0
Hey, I have a wagon myself, which currently getting ready to paint... the coil overs you have on your car, where they made for the wagon, or did you use ones for other Civics? I have been looking for lowering springs, but have been unable to find any... they all say 88-91 Civic ex. Wagon
Any advice would be apreciated
Adam
91 CRX Si
91 Civic Wagon
Any advice would be apreciated
Adam
91 CRX Si
91 Civic Wagon
Thread Starter
Honda-Tech Member
Joined: Feb 2001
Posts: 4,830
Likes: 3
From: blah blah blah
Re: (d16a6crx)
The coilovers I have are for the 88-91 civic.
The springs on the rear of the wagon are longer than other civics, because the spring perch sits so low on the shock.
If you want to keep the stock wagon shocks, just get some coilover sleeves.
If you just want springs, swap out your rear shocks for regular civic shocks and it will work fine.
The springs on the rear of the wagon are longer than other civics, because the spring perch sits so low on the shock.
If you want to keep the stock wagon shocks, just get some coilover sleeves.
If you just want springs, swap out your rear shocks for regular civic shocks and it will work fine.
Honda-Tech Member
Joined: Apr 2002
Posts: 1,697
Likes: 0
From: Colfax NC
Re: (Charlie Moua)
that looks really good.. i wonder if you can fit the accord lip on a EF8 front end cuz if so, this would look HOT since its for an accord. you could get this lip and modify it to fit
Honda-Tech Member
iTrader: (1)
Joined: May 2002
Posts: 3,169
Likes: 0
From: Monterey Park/Huntington Beach, CA, USA
Re: '94 Accord lip pics (Slopoke)
wow.thats a nice wagon!! i was actually considering that lip because my manager crashed his accord..and its just sitting at work. im so tempted to take it off. i wonder how it'll look on a hatch.
i was actually considering that lip because my manager crashed his accord..and its just sitting at work. im so tempted to take it off. i wonder how it'll look on a hatch.
Re: '94 Accord lip pics (jdmEFnine1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmEFnine1 »</TD></TR><TR><TD CLASS="quote">i went to the dealership out here and and they told me 85$</TD></TR></TABLE>
Congratulations! You just revived a thread from 5 months ago!
Congratulations! You just revived a thread from 5 months ago!
The Boot
Joined: Dec 2001
Posts: 9,841
Likes: 0
From: Arizona, US
Re: '94 Accord lip pics (riceburner247)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by riceburner247 »</TD></TR><TR><TD CLASS="quote">
Congratulations! You just revived a thread from 5 months ago!</TD></TR></TABLE>
heh
Congratulations! You just revived a thread from 5 months ago!</TD></TR></TABLE>
heh
Honda-Tech Member
Joined: Oct 2003
Posts: 1,494
Likes: 0
From: USA
Re: '94 Accord lip pics (Smokinsax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by riceburner247 »</TD></TR><TR><TD CLASS="quote">
Congratulations! You just revived a thread from 5 months ago!</TD></TR></TABLE>
that **** had me laughing. Looks good though.
Congratulations! You just revived a thread from 5 months ago!</TD></TR></TABLE>
that **** had me laughing. Looks good though.
MEAT PATTY
Joined: Apr 2002
Posts: 5,633
Likes: 2
From: White Suburbia, PA
Re: '94 Accord lip pics (spr)
I tried put the accord lip on a while ago on my hatch. I was running into problems from the length like you mentioned. I had a 90 si hatch but now i have a 88std and yes it was too long. The only way to make it fit seemed to be cutting it through the middle. How did you make it fit by cutting it shorter on the sides. Maybe it has to do with the fact you have a wagon front bumper, but I'm not sure 
Oh yeah I also had a 96 accord lip, maybe that made a difference.
Oh yeah I also had a 96 accord lip, maybe that made a difference.
