Parting out a complete Integra LS
Tranny, shiftlinkage, midshaft, axles, tires and rims are gone. everything else is still there. Shortblock still needs to be examined before i sell it. There is a large hole in the oil pan and i need to see if there is internal damage. Post here or email me at cadled@bellsouth.net with offers. I'll accept paypal and usps money orders.
Updated prices
Short block without oil pan or oil pickup. 150 plus shipping
Head without manifolds 150 plus shipping
IM w/ TB, injectors, and sensors 110 shipped
Rear tranny mount and bracket 70 shipped
LS engine wire harness 80 shipped
Damaged DC exhaust 125 plus shipping
Front lcas(+ 50 for sway bar) 70 shipped
Rear lcas(+ 50 for sway bar) 70 shipped
Aftermarket parts include
-dc exhaust (dented in some places but could be fixed. I'll have pics later)
-dc rear upper strut bar SOLD
Modified by fire7882 at 12:46 PM 6/20/2003
Updated prices
Short block without oil pan or oil pickup. 150 plus shipping
Head without manifolds 150 plus shipping
IM w/ TB, injectors, and sensors 110 shipped
Rear tranny mount and bracket 70 shipped
LS engine wire harness 80 shipped
Damaged DC exhaust 125 plus shipping
Front lcas(+ 50 for sway bar) 70 shipped
Rear lcas(+ 50 for sway bar) 70 shipped
Aftermarket parts include
-dc exhaust (dented in some places but could be fixed. I'll have pics later)
-dc rear upper strut bar SOLD
Modified by fire7882 at 12:46 PM 6/20/2003
downpipe is bent bad, 75 shipped for the oh **** handle and the strut bar.
The motor looks to be in good condition. It will need a new oil pan and oil pickup. The crank spins freely. The bolt hole that holds the rear tranny bracket the the engine block is also broke off. I have the piece that broke off, so it can be easily welded back on. I would recomend this block for a rebuild but am sure it would fire up with the new parts. I'll post pics later.
The motor looks to be in good condition. It will need a new oil pan and oil pickup. The crank spins freely. The bolt hole that holds the rear tranny bracket the the engine block is also broke off. I have the piece that broke off, so it can be easily welded back on. I would recomend this block for a rebuild but am sure it would fire up with the new parts. I'll post pics later.
1. Center Console (front half, where shifter is) Also including AC unit, cup holders, ash tray, etc...whole thing.
2. Part around the Gauges
3. Clock
4. Glove box
5. 4 Pegs that are in the Center Console by the E-Brake
6. Left and right Vents and two small vents on top of dash
7. Seat belt holders (where seat belt goes into the car)
8. 4 of the door part around the handle where the lock/unlock button is
9. 4 of the door things where you hold to open the door, can put change in them
10. rear coin holder
no cupholders...neeed these things bad man...how much for the package shipped to 21042
2. Part around the Gauges
3. Clock
4. Glove box
5. 4 Pegs that are in the Center Console by the E-Brake
6. Left and right Vents and two small vents on top of dash
7. Seat belt holders (where seat belt goes into the car)
8. 4 of the door part around the handle where the lock/unlock button is
9. 4 of the door things where you hold to open the door, can put change in them
10. rear coin holder
no cupholders...neeed these things bad man...how much for the package shipped to 21042
i need axles and intermidate shaft aswell as tranny bolts, Clutch and flywheel if in good conditon. how much for each item and as a package?
BLikeWhoa, 100 shipped for everything. The interior is tan. i'll start removing the parts you want and take a picture of everything for you.
Trending Topics
ek9folife,
Clutch and flywheel are the only things i have left but they might be sold. I'll let you know if i still have them tomorrow.
Clutch and flywheel are the only things i have left but they might be sold. I'll let you know if i still have them tomorrow.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tr0LL »</TD></TR><TR><TD CLASS="quote">how much for the steering rack if it's not bent/dented/f_ck'd up??</TD></TR></TABLE>
125 shipped because it will be a PITA to ship. 50 picked up
Updated prices
Short block without oil pan or oil pickup. 150 plus shipping
Head without manifolds 150 plus shipping
IM w/ TB, injectors, and sensors 110 shipped
Rear tranny mount and bracket 70 shipped
LS engine wire harness 80 shipped
Damaged DC exhaust 125 plus shipping
Front lcas(+ 50 for sway bar) 70 shipped
Rear lcas(+ 50 for sway bar) 70 shipped
Some of these larger items i want to wait and see if i can sell them localy. If they don't sell in a week, I'll ship them.
Short block without oil pan or oil pickup. 150 plus shipping
Head without manifolds 150 plus shipping
IM w/ TB, injectors, and sensors 110 shipped
Rear tranny mount and bracket 70 shipped
LS engine wire harness 80 shipped
Damaged DC exhaust 125 plus shipping
Front lcas(+ 50 for sway bar) 70 shipped
Rear lcas(+ 50 for sway bar) 70 shipped
Some of these larger items i want to wait and see if i can sell them localy. If they don't sell in a week, I'll ship them.
Floormats are tan and i can do 30 shipped on those. I'll take a pic tomorrow
I'll also get pics of the seats and dc exhaust tomorrow.
I'll also get pics of the seats and dc exhaust tomorrow.
I may be ineterested in the short block. What wold shipping be on it to Ohio 45215.
Email me at hoebeemer@aol.com
Email me at hoebeemer@aol.com
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Synergy001 »</TD></TR><TR><TD CLASS="quote">i got $500 on them altezzas.........lol</TD></TR></TABLE>
Or you could buy them here
http://cgi.ebay.com/ebaymotors...24652
Or you could buy them here
http://cgi.ebay.com/ebaymotors...24652


